Round Hill Furniture B132D User manual

Parts and Damage Replacement Procedure
1. Please inspect your purchase immediately.
2. This procedure covers product purchased from an authorized Roundhill Reseller and was received in
its originally sealed carton.
3. If you find a part missing or damaged, you have a 30-day window in which to order a replacement
part from the date on your purchase receipt.
4. You have 3 ways to do this. You will need a copy of your purchase receipt.
a. By Fax: Fax the parts order form below and along with your receipt to 614-878-7918
b. By Email: Email the order form and along with your receipt to: [e-mail]
c. By Mail: Fill out the parts order form below and along with a copy of your receipt send it to
Roundhill furniture parts department 3640 Zane Trace Drive, Columbus OH 43228
5. Once this order is sent in, you will be notified if the part(s) you are requesting can or cannot be
shipped within 7-10 business days.
A COPY OF YOUR PURCHASE RECEIPT OR INVOICE MUST BE ATTACHED TO THIS ORDER FORM.
NO ORDERS WILL BE PROCESSED WITHOUT PROOF OF PURCHASE.
NAME: ___________________________________________________________________________
ADDRESS: ___________________________________________________ (No Post Office Boxes)
CITY: ___________________ STATE: _____________________ ZIP: _____________________
PHONE: _________________________________ FAX: __________________________________
EMAIL: ___________________________________________________________________________
REASON FOR REPLACEMENT/PLEASE CHECK APPROPRIATE BOX.
( ) Damaged /scratched, cracked, broken, crushed, etc.
( ) Mechanical malfunction/ drawer glides, swivel mechanisms, lid stays, etc.
( ) Missing pieces
( ) Unfinished surface
( ) Wrong color
( ) Other
IF MORE THAN ONE MODEL NUMBER IS LISTED ABOVE, PLEASE SPECIFY THE EXACT MODEL NUMBER OF YOUR ITEM
IN THE SPACE PROVIDED BELOW.
Model Number
Part Letter Code
Quantity

ASSEMBLY INSTRUCTION
Thank you for purchasing this quality product.Be sure to check all packing material carefully for small Hardware
which may have come loose inside the carton during shipment.Identify and count all Hardware and compare with
the Hardware List below.
www.roundhillfurniture.com
MODEL :B132D + B132C
DESCRIPTION :DRESSER & CHEST
COMPONENT LIST
Bun Feet 4 pcs
Note : Take out assembly instructions sheet, hardware pack and feet packaging from the drawer which marked with the rope.
COMPONENT LIST
Bun Feet 4 pcs
Center Support Leg 1 pc
STEP 1
Please lay down the casegoods on the
floor.
ASSEMBLY COMPLETED
STEP 2
Fasten bun feet to casegoods according
to the position with turning the bun
feet clockwise until tightly.
NIGHT STANDCHEST
ASSEMBLY COMPLETED
STEP 1
Please lay down the dresser on the floor.
STEP 2
Fasten bun feet to dresser according to the position with turning the bun feet
clockwise until tightly.
STEP 3
Align and tighten center support leg to bottom panel of dresser.
STEP 2STEP 3
DRESSER
Page 1 of 2

www.roundhillfurniture.comPage 2 of 2
ANTI - TIPPING KIT
FOR CHEST, DRESSER, PLASMA/TV CHEST & NIGHTSTAND (IF OVER 30")
STEP 1
Attach a bracket securely to the back top rail of the casegoods using short screw provided, through the smaller hole.
This Tip Restraint Must Be Attached To A
Wall Stud Using Long Screw Enclosed
1.
STEP 2
Locate the other bracket on the wall over a wall stud
and two inches below the mounting bracket secured to the back of
casegoods. Attached to the wall stud using the long screw provided,
through the smaller hole.
STEP 3
Place the casegoods into position so both mounting brackets are
vertically in line. Lace the end of the restraint strap through the
larger hole in each mounting bracket. Bring both ends together
and slide the flat end through the locking end and draw it through
until all slack is removed. Confirm that the strap is securely laced
and locked.
wall wall
2.
3.
4.
Long screw
Cable tie
L Bracket
Short screw
HARDWARE
1 pc
1 pc
2 pcs
1 pc
24
4
4
3
PLASMA/ TV
CHEST
NIGHTSTAND
(IF OVER 30")
CHEST
DRESSER
4
1