
H
H
W-A
W-C
X
W-A
W-C
W-B
Step 1: Mount the back plate to the wall
INSTALLATION
FULL-MOTION WALL MOUNT
Flat Panel TV’s
For Drywall
1. Remove the TV mounting plate
2. Level, mark & drill 1/4” holes for each screw
3. Mount back plate to wall hitting 2 studs
For Concrete
1. Remove the TV mounting plate
2. Level, mark & drill 1/2” holes for each anchor/screw
3. Mount the back plate to the wall
4. Attach the mount arm to the back plate 4. Attach the mount arm to the back plate
Mount Pieces
TV Mounting Hardware
A (x1)
M-A (x4) M-B (x4) M-C (x4) M-D (x4) M-E (x4) M-F (x4) M-G (x8) M-H (x8)
B (x1) C (x2) D (x2)
E (x2) F (x7) G (x7) H (x1) H (x1)
M6x30
M6x15
M5x14 M6x14 M8x30 M8x50
WHAT’S IN THE BOX
Congratulations!
INTRODUCTION
Wall Mounting Hardware
▪300x200
▪400x200
▪400x400
▪800x400
▪300x300
▪400x300
▪600x400
▪800x600
VESA Patterns
W-A (x6) W-B (x6) W-C (x6)
The ROY7707B Dual Stud Full-Motion Wall Mount is a
great solution for mounting TV’s ranging from 43 inches
up to 100 inches. This mount can support up to 154
pounds. It has a profile that ranges between 2.8 and
31.5 inches from the wall.
FULL-MOTION WALL MOUNT
Flat Panel TV’s
TV SIZE
43” - 100”
MAX VESA
800 X 600
2.8 - 31.5 INCH
PROFILE
2.8”
MAX LOAD
154lbs
154lbs
BLACK
FINISH
▪Level
▪Pencil
▪Drill
▪ Screwdriver (Phillips)
▪ Stud Finder *
Tools Needed