ROYAL SAUNAS ROYAL-II User manual

ROYAL-II
Owner's manual
100 x 95 x 190cm

Installation Requirements
Assembly of a sauna requires at least two adults to complete. Please read the instructions thoroughly
before and during assembly to ensure proper installation of the sauna.
You will require a power drill or phillips-head screwdriver, these tools are not included. You will also need
a 3-step ladder or equivalent.
A standard 16A/230V normal socket required.
Do not run any other appliances from the same power point.
Ensure the oor is level and dry before installation.
Safety
Please read all health and safety instructions.
1. This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities or lack of knowledge or experience, unless
they have been given supervision or instruction
concerning use of the appliance by a person responsible
for their safety.
2. Children should not be permitted to play in or with the
appliance.
3. If the supply cord is damaged it must be replaced by the
manufacturer, its service agent or similarly qualified persons
in order to avoid a hazard.
4. Cleaning of this infrared sauna by steam cleaners, high
pressure cleaners or spraying water is not allowed.
5. Do not cover infrared heaters. Covering the infrared heaters
causes fire risk.
6. Before starting the sauna or resetting the timer, check the
sauna to ensure it is in safe condition and not occupied.
7. Individuals who may be at risk from hyperthermia, such as
individuals suffering from cardiovascular disease, should seek
medical advice before use of sauna.
8. If you experience reddening (erythema) of the skin lasting
more than a day after exposure to infrared radiation, exposure
should not be repeated and medical advice should be
sought to prevent development of erythema.
9. If you are a person with sensitivity to heat or under the
influence of alcohol or tranquilisers you should not use an
infrared sauna.
10. When installing and using the sauna, basic safety precautions
should always be followed.
11. Infants, pregnant women and elderly people suffering from
any medical condition directly related to temperature should
consult their health care professional before using the sauna.
12. Persons using medications should consult their health care
professional before using the sauna.
13. Never sleep inside the sauna while the unit is in operation.
14. Do not use any type of chemical cleaning agents on the
interior or exterior of the sauna or you will void the warranty.
15. Do not stack or store any object ontop of or inside the sauna.
16. Dry your hands before handling electrical controls. Never
unplug the power cord or adjust the controls with wet hands
or when you have wet bare feet.
17. Do not attempt any repair without consulting the
manufacturer first. Unauthorized repair attempts will void the
warranty.
18. If replacement of heaters is required only use original
manufacturers (oem) parts.
Cleaning & Maintenance
• Before using your infrared sauna for the first time, clean the inside of the sauna with a damp cloth.
If you experience a strong smell at first, do not be concerned as this is normal.
• To clean the exterior use a feather duster or scratch proof cloth. A damp cloth can also be used to remove stubborn dirt.
• Scratches and stains on the sauna can be removed by simply using fine grade sandpaper over the damaged area. We
recommend sealing with a wood preserver, wood oil or furniture polish if needed.
(2)
CARBON FIBRE
HEATING
CARBON FIBRE
HEATING

Important Safeguards
•READ INSTRUCTIONS
All the safety and operating instructions should be read before sauna is installed and
operated.
•RETAIN INSTRUCTIONS
The safety and operating instructions should be kept in a safe place for future reference.
•FOLLOW INSTRUCTIONS
All operating and usage instructions should be followed at all times.
•CLEANING
Unplug the sauna from the wall outlet before cleaning. DO NOT use liquid cleaners or aerosol
cleansers inside the sauna. Use a damp cloth for
cleaning.
•POWER-CORD PROTECTION
Power supply cord should be routed so it is not likely to be walked on or pinched by
items placed upon or against it.
•OVERLOADING
Do not overload the wall outlet as this can result in a risk of fire or electric shock.
•GLASS DOOR
DO NOT remove glass door from frame when disassembling.
Some Useful Tips
• We recommend sauna sessions should be 30-45 minutes at 45°C – 55°C.
• Allow approximately 10 to 20 minutes (depending on the ambient temperature) for the sauna to warm up before beginning
a session.
• Try drinking some hot tea before your sauna session to induce a deeper sweat.
• The heaters will automatically maintain the set temperature inside the sauna once the set temperature is reached.
• The ceiling vent can be opened at any time for air circulation. If you are still too warm, open the door until you feel
comfortable or turn the set temperature down.
• To absorb perspiration and keep the sauna tidy during the session, place a towel on the bench and floor of the sauna.
Keep one towel handy to wipe excessive sweat from your body.
• Try not to eat anything at least an hour before your sauna session. It is better to use the sauna on an empty stomach.
You are more likely to feel uncomfortable sitting in a sauna with a full stomach.
• Ensure you drink plenty of water before, during and after your sauna sessions. We recommend 1L before, 1L during and 0.5L
after every session. Water acts as the vehicle to move the toxins from your body. Drinking water before will maximise
perspiration during the session. Drinking after will help keep your fluid levels up after sweating.
• Takeing a hot shower, bath or using a hot tub prior to the sauna session will further promote perspiration. Once finished, sit in the sauna
with the door open and allow your body to cool off. When you feel comfortable enough, take a warm (or cool) shower to
rinse the sweat off your body.
• To help relieve sore and tense muscles, massage the affected areas while in the sauna.
• Treat your ankles and feet more effectively by elevating them while inside the sauna.
(3)

1. Place Floor Panel 2. Add Front Panel,then
add Door Handle
7. Lay down the bench on
the leg heater panel,and
fix it by using the screws
5. Attach back panel
with right and left
panels by using
outside buckles
6. Install the leg heater
and plug the heater
connector into the back
panel socket
3. Attach left panel
and front panel
by using inner buckles
4. Attach right panel
and front panel
by using inner buckles
8. Add Top Panel,feed
heater cables through
holes
Assembly Order:
(4)
9.Install Heater
connectors
10. Plug the
control panel cable
into the CTRL
socket
11. finish, enjoy
your sauna

Control Panel
1. Turn on the sauna by pressing the ON/OFF Button
2. Select the desired temperature measurement(F°/C°) using the Temperature Measurement Button
3. Set the temperature using the Temp Up and Temp Down buttons
4. Set the heating duration (minutes) using the Time Up and Time Down buttons
5. Press the ON/OFF Button again to turn on the heaters and start the timer
6. Press AUTO button. Temp becomes hours ahead. Time becomes minutes ahead.Your sauna
will begin heating after the programmed time has elapsed.
Time Up
&
Time Down
Temp Up
&
Temp Down
Light Control
Power Button
Temperature
Measurement
Button
Operating Instructions