
®3m Cantilever Parasol
Assembly Instructions
ProducedinChinaforA.Mir&Co.,Ltd.
© A. Mir & Co., Ltd. 2 / 6
www.ro
alcraft.co.uk
Before you start
Warnings
IMPORTANT, RETAIN FOR FUTURE REFERENCE
READ CAREFULLY
See enclosed instructions for assembly, safety and care
information.
Failure to follow the warnings could result in serious injury.
Handle heavy parts with care.
Ensure that this product is fully assembled as illustrated before
use.
This product should only be used on firm, level ground.
The product contains small parts which could
pose a risk to young children. Keep small parts
out of reach of children.
This product is intended for domestic use only.
Ensure the product is always placed on level ground.
Furniture can be dangerous if incorrectly used. No liability will be
accepted for damage or injury caused by incorrect use of this
product.
Keep hands away from folding mechanism and
moving parts to prevent possible injury.
NEVER USE OR OPEN THIS PARASOL
WITHOUT A SUITABLE BASE SET IN PLACE.
Dos
When you are ready to start, make sure that you have the right
tools, plenty of space and a clean, dry area for assembly.
Unwrap all packaging materials and place the components on
suitable surface to prevent scratching your product.
Check the pack and make sure you have all of the parts listed.
Check all screws and bolts are tightened and inspect regularly.
We recommend the use of furniture covers to protect your product
when not in use.
During bad weather or in winter months, the product should be
stored in a cool, dry place. Before storage, ensure that the product
is clean and dry.
To clean, wipe with a damp sponge and a little warm soapy water
then dry with a clean, dry cloth. Do not use solvent-based cleaners
or detergents as they can bleach or damage the product.
Clean the fabric using a little warm soapy water. The product must
be thoroughly dried afterwards to prevent mildew and mould stains
from forming. Most stains can be removed with a mild detergent.
The parasol is not 100% waterproof and water may seep through
the seams and/or fabric in heavy rain. Ensure that the parasol is
fully dry before use.
Don’ts
Do not stand or climb onto the product.
Do not use power tools to construct this product.
Do not sit or lean onto the rims of this product.
Do not use this product if parts are missing, damaged or worn.
Do not leave the parasol open when there is a risk of high winds, as
damage will occur to its structure.
Never use scourers, abrasives or chemical cleaner.
Never use a pressure hose or washer to clean the product.
Never drag furniture when moving it, always lift it.
Never move this parasol when fully assembled.
To avoid damage do not allow water to collect or “pool” on the fabric.
The parasol is not 100% waterproof and water may seep through
the seams and/or fabric in heavy rain. Ensure that the parasol is
fully dry before use.
It is recommended that before moving heavy objects to a new
location they be completely disassembled to avoid personal injury
or damage to the furniture. Please be careful to retain all fittings
when doing this.
Please ensure you have correctly installed the parasol before use.
A competent person should carry out assembly. No liability will be
accepted for damage or injury caused by incorrectly installed or
assembled furniture.
Number of people required for assembly
One person.
Time to assemble
Tools required