Royalcraft Berlin User manual

Produced in China for A Mir & Co., Ltd.
© A Mir & Co., Ltd. 2 / 6
www.ro
y
alcraft.co.uk
Before you start
Don’ts
Two people
Time to assemble
15 minutes
Tools required
Tips:
Do NOT fully tighten bolts before
all components are connected.
Only fullytighten once you are
satisfied with the alignment of all
components.
Do not overtighten bolts.
Armless Sofa for Berlin 4 or 6PCS Corner
Lounging Sofa Set
Assembly Instructions
Warnings
IMPORTANT, RETAIN FOR FUTURE REFERENCE
READ CAREFULLY
See enclosed instructions for assembly, safety and care
information.
Failure to follow the warnings could result in serious injury.
Handle heavy parts with care.
Ensure that this product is fully assembled as illustrated before
use.
This product should only be used on firm, level ground.
Keep small parts out of reach of children.
Do not stand or climb onto this product.
This product is intended for domestic use only.
Furniture can be dangerous if incorrectly used. No liability will be
accepted for damage or injury caused by incorrect use of this
product.
Dos
When you are ready to start, make sure that you have the right
tools, plenty of space and a clean, dry area for assembly.
Unwrap all packaging materials and place the components on a
suitable surface to prevent scratching your product.
Check all contents are present prior to assembly as per the parts
list provided. In the event of problems or missing parts, please
contact the seller.
Check all screws and bolts are tightened and inspect regularly.
Cover furniture when not in use to add additional protection to your
product.
Store all cushions indoors after use as they are not waterproof.
During severe weather conditions, including high winds, rain, hail,
thunderstorms, extreme heat and cold temperatures, the product
should be stored inside in a cool, dry place.
To best preserve the synthetic rattan, please use a protective cover
when your furniture is not in use. We would also recommend using
a gazebo or parasol over your furniture during the summer period
and prolonged sunny spells. This will help prevent harmful UV rays
from damaging and discolouring the material.
Ensure that the product is clean and dry before storage.
Clean your product with a sponge and warm soapy water then wipe
with a clean, dry cloth.
Cushions should be cleaned following the care instruction on
the label.
Where instructions as to the; storage, commissioning, installation,
use and maintenance of the goods or (if there is none) good trade
practice are not followed and a defect arises this will void the
12 month manufacturer's guarantee on the product.
Never tilt the chair during use.
Do not stand or climb onto the product.
Do not use power tools to construct this product.
Do not sit or lean onto the arms of this product.
Do not use this product if parts are missing, damaged or worn.
Do not use scourers, abrasives, washing powders, chemical
cleaners or any other substances containing abrasives since
these substances can damage the product.
Do not use this product as a ladder as this could lead to the
prproduct becoming unbalanced and overturning.
Do not place very hot or very cold items on this product surface.
Never drag furniture when moving it, always lift it.
Number of people required for assembly

Produced in China for A Mir & Co., Ltd.
© A Mir & Co., Ltd. 3 / 6
www.ro
y
alcraft.co.uk
Please find the Components for the whole set.
This Carton contains Component 3.
No. Diagram Name Qty.
1 3-Seater Sofa 1 PC
2 2-Seater Sofa 1 PC
3 Armless Sofa 1 PC
4 Coffee Table 1 PC
5
Only for 6PCS Corner Lounging Sofa Set
Armchair 1 PC
6
Only for 6PCS Corner Lounging Sofa Set
Footstool 1 PC
Armless Sofa for Berlin 4 or 6PCS
Corner Lounging Sofa Set
Assembly Instructions

Produced in China for A Mir & Co., Ltd.
© A Mir & Co., Ltd. 4 / 6
www.ro
y
alcraft.co.uk
Parts, fixtures & fittings (not actual size)
Parts List
Part
No. Diagram Qty. Part No. Diagram Qty.
A
Backrest
1 PC B
Front Panel
1 PC
C
Side Panel
2 PCS D
Seat
1 PC
E
Seat Cushion
1 PC F
Backrest Cushion
1 PC
N35
M6*35mm Bolt
12
PCS
AK
Allen Key
1 PC
F2
Washer Clip
12
PCS
CL
4
PCS
mm
10
20
30
40
50
60
70
80
90
100
110
120
130
140
150
160
170
180
190
200
210
220
0
Armless Sofa for Berlin 4 or 6PCS
Corner Lounging Sofa Set
Assembly Instructions

Produced in China for A Mir & Co., Ltd.
© A Mir & Co., Ltd. 5 / 6
www.ro
y
alcraft.co.uk
Component 3 – Armless Sofa: Assembly Steps
Step One
Loosely attach the Backrest (A), Front Panel (B)
Side Panels (C) to each other
using Washers (F2) and Bolts (N35).
Step Two
Loosely attach the
Seat (D) to above partly-assembled parts
using Washers (F2) and Bolts (N35).
Step Three
With the help of another person,
turn over and move the Armless Sofa to
the intended location for use,
N35
F2
A
B
C
D
N35
F2
Armless Sofa for Berlin 4 or 6PCS
Corner Lounging Sofa Set
Assembly Instructions

Produced in China for A Mir & Co., Ltd.
© A Mir & Co., Ltd. 6 / 6
www.ro
y
alcraft.co.uk
Step Four
Place the Seat Cushion (E) and
Backrest Cushion (F) onto the seat.
Your Armless Sofa is now ready for use.
Step Five
Please note this Sofa should be
combined together with other parts with Clips (CL) like below diagram.
Never tilt the products during use.
Ensure the product is always placed firmly
on the ground.
Ensure the product is always placed firmly on the ground.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
E
F
CL
2-Seater Sofa
3-Seater Sofa
Armless Sofa
Armless Sofa for Berlin 4 or 6PCS
Corner Lounging Sofa Set
Assembly Instructions