Royalcraft Rio User manual

Product Size:
Dia240*220cm
The intended use of this product is for domestic use only.
Important, please retain for future reference.
Read carefully .
 ____________________ 
  
   1 / 3

ProducedinChinaforA.Mir&Co.,Ltd.
© A. Mir & Co., Ltd. 2 / 3
www.ro
y
alcraft.co.uk
Before you start
Warnings
See enclosed instructions for assembly, safety and care
information.
Failure to follow the warnings could result in serious injury.
Handle heavy parts with care.
Ensure that this product is fully assembled as illustrated before
use.
This product should only be used on firm, level ground.
The product contains small parts which could
pose a risk to young children. Keep small parts
out of reach of children.
Keep hands away from folding mechanism
and moving parts to prevent possible injury.
NEVER USE OR OPEN THIS PARASOL
WITHOUT A SUITABLE BASE SET IN PLACE.
Dos
When you are ready to start, make sure that you have the right
tools, plenty of space and a clean, dry area for assembly.
Unwrap all packaging materials and place the components on
suitable surface to prevent scratching your product.
Check the pack and make sure you have all of the parts listed.
Check all screws and bolts are tightened and inspect regularly.
We recommend the use of furniture covers to protect your
product when not in use.
During bad weather or in winter months, the product should be
taken down and stored in a cool, dry place. Before storage,
ensure that the product is clean and dry.
To clean, wipe with a damp sponge and a little warm soapy
water, then dry with a clean, dry cloth. Do not use solvent-
based cleaners or detergents as they can bleach or damage
the product.
Clean the fabric using a little warm soapy water. The product
must be thoroughly dried afterwards to prevent mildew and
mould stains from forming. Most stains can be removed with a
mild detergent. The parasol is not 100% waterproof.
Don’ts
Do not stand or climb onto the product.
Do not use power tools to construct this product.
Do not sit or lean onto the rims of this product.
Do not use this product if parts are missing, damaged or worn.
Do not leave the parasol open when there is a risk of high winds, as
damage will occur to its structure.
Never use scourers, abrasives or chemical cleaner.
Never use a pressure hose or washer to clean the product.
Never drag furniture when moving it, always lift it.
Never move this parasol when fully assembled.
To avoid damage do not allow water to collect or “pool” on the fabric.
Number of people required for assembly
One person
Time to assemble
5 Minutes
Tools required
None
Rio 2.4m Parasol - Black
Assembly Instructions

Produced in China for A. Mir & Co., Ltd.
© A. Mir & Co., Ltd. 3 / 3
www.ro
y
alcraft.co.uk
Parts List
Part
No. Diagram Qty. Part No. Diagram Qty.
A
A
Main Parasol Part
1 PC B
B
Bo�om Pole
1 PC
Assembly and Usage Steps
1. Press the Spring Pin and insert the Bottom Pole (B) into the Main Parasol Part (A);
2. Place the parasol at the intended place for use; Ensure a suitable base (not provided) is
used.
3. Rotate the Crank clockwise to spread the parasol canopy;
4. The parasol is closed by reversing above steps.
Note: The diagrams are for reference only.
A suitable parasol based should be used together with this parasol!
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
WARNING
Please take care to keep fingers away
from moving parts and crank rotating
area to prevent possible injury.
Rio 2.4m Parasol - Black
Assembly Instructions