rst brands Vaughn OP-AWSOF74-VGHN User manual

Vaughn 74" Sofa
Model: OP-AWSOF74-VGHN
ASSEMBLY INSTRUCTIONS
IMPORTANT, RETAIN FOR FUTURE REFERENCE.
READ CAREFULLY.
For assistance with assembly or customer service,
call 1-877-924-2090 (English) Monday-Friday, 8 a.m. to 5 p.m. Mountain
Time, North America. Email: [e-mail] or visit
our website at www.rstbrands.com

1
PARTS LIST
NO. PICTURE PART DESCRIPTION QTY.
AFrame legs 2
BBack 1
CBase 1
DCross bar 1
EBolt
(M6 x 70) 4
FBarrel nut 4
GWood screw
(M6 x 60)
H#4 Allen wrench

2
Step 1.
Attach back (B) to the top of
frame leg (A) using wood screw (G) and allen wrench (H). Then attach the bottom of
back (B) to frame leg (A) using the barrel nut (F) and bolt (E) and allen wrenches (H).
Lastly attach coss bar (D) to the front of frame leg (A) using barrel nut (F), bolt (E), and
allen wrenches (H).

3
Step 2. Repeat same steps from steps 1
on the opposite side.

4
Step 3. Place seat (C) into position between frame legs (A) and
secure through the back and sides of the front legs with wood screws (G) and allen
wrench (H)

5
Care and Maintenance
All outdoor furniture is subject to UV rays and weather elements. In order to keep your
furniture as long lasting and vibrant as possible, we advise using furniture covers or
storing the furniture when not in use. For more information about the materials used
to make our furniture please visit www.rstbrands.com/details-landing
WICKER
Simply washing your wicker with a mild detergent and
protecting it as much as possible by covering and or storing
WOOD FRAMES
Make sure all surfaces are protected from heat and liquids. Wipe up
spills immediately and do not place furniture next to a heat source
All timber surfaces may change color. Spray
polishes are best to avoid as they contain silicones which may spoil
the surface by building up overtime. Check bolts and screws regularly
and tighten when necessary.
STONE TOPS/ TABLE TOPS
Spills should be wiped up quickly to avoid any staining on
the surface. Regular cleaning with mild soap and water with
a sponge or soft scrub brush is all that is required. Storing or
covering your natural stone top when not in use for extended
periods of time is recommended.
FABRICS
fabrics designed to protect and last for several years. Sunbrella
fabrics are treated with a proprietary water and stain repellent.
If needed to revive fabrics Glen Raven® recommends 303® Fabric
Guard™. For more information visit www.303products.com and
follow instructions on the container.

6
WARRANTY
Welcome to the RST Family
How it Works
Here to Help
to ensure all of our products are free from defects, in material and workmanships, to the original
purchaser for a period of one year from the date of your purchase.
We are happy to furnish a replacement at no cost to you in the case we determine a component
to be defective. While our warranty applies to conditions of normal use, it does not apply to
defects or damage resulting from intentional or accidental damage, outdoor use. negligence,
or unreasonable use.
Please immediately report any defect to RST by calling [phone] or send an email to t@rst-
brands.com. Have your receipt and order number handy for our team of customer service profession-
als that will be eager to assist you.
For assistance with assembly or customer service,call 1-877-924-2090 (English) Monday-Friday,
8 a.m. to 5 p.m. Mountain Time, North America. Email: customerser[email protected]
or visit our website at www.rstbrands.com

Canapé Vaughn 74" (1.88 m)
Modéle: OP-AWSOF74-VGHN
INSTRUCTIONS D'ASSEMBLAGE
IMPORTANT, À CONSERVER À TITRE DE RÉFÉRENCE.
À LIRE ATTENTIVEMENT.
Pour de l’aide a l’assemblage ou le service a la clientèle, composez le 1-877-924-2090 (Anglais) Lun-
di - Vendredi 8 heures - 17 heures, heure des Rocheuses, en Amérique du Nord.
Émail: [email protected] ou visitez notre site Web a rstbrands.com

1
LISTE DES PIÈCES
NO. IMAGE RÉFÉRENCE DESCRIPTION QTÉ
APattes de cadrage 2
BDossier 1
CBase 1
DBarre transversale 1
EBoulon
(M6 x 70) 4
FÉcrou à barillet 4
GVis à bois
(M6 x 60)
HClé Allen n ° 4

2
Étape 1.
ATTACHEZ LE DOSSIER ET LA BARRE TRANSVERSALEÀ LA PATTE DE CADRAGE
1. Attachez le dossier (B) au-dessus de la patte de cadrage (A) en utilisant les vis à bois
(G) et la clé Allen (H). 2. Attachez le dessous au dossier (B) à la patte de cadrage (A) en
utilisant l'écrou à barillet (F), le boulon (E) et la clé Allen (H). 3. Attachez la barre trans-
versale (D) au-devant de la patte de cadrage (A) en utilisant l'écrou à barillet (F), le
boulon (E) et clé Allen (H).