User Manual
Date: 2017-07-11
File: Nice_user_manual.docx Ref.: LEH Rev.: 3.0 Page: 3of 8pages
This document and the information contained is property of RTX A/S, Denmark. Unauthorized copying is not allowed. The in-
formation in this document is believed to be correct at the time of writing. RTX A/S reserves the right at any time to change said
content, circuitry and specifications.
1 Preface
1.1 About this document
This document describes the RTX Nexus ICE-III target interface unit.
1.2 Intended audience
This document is written for users of RTX Nexus ICE-III on the Windows platform, using the
RTX Nexus Debugger debugging environment. It is assumed that you are a software engineer
with some experience of the ARM Cortex-M or NSC CR16C architecture.
1.3 Further reading
This section lists publications by thirds parties that are related to this product.
ARM Cortex-M Series Family:
http://www.arm.com/products/processors/cortex-m
ARM Serial Wire Debug (SWD):
https://www.arm.com/products/processors/serial-wire-debug.php
JTAG technology, IEEE standard 1149.1:
http://www.ieee.org/
1.4 Feedback
RTX A/S welcomes feedback both on the RTX Nexus ICE-III, the RTX Nexus Debugger and
the documentation.
The software for the RTX Nexus Debugger and RTX Nexus ICE-III is updated regularly with
new features and bug fixes. The latest versions are available free of charge from the download
section at https://www.rtx.dk/.
If you have any problems with RTX Nexus ICE-III, please use the contact from at
https://www.rtx.dk/. To help us provide a rapid and useful response, please give:
•the RTX Nexus ICE-III serial number you are using.
•the RTX Nexus Debugger software version you are using.
•a clear explanation of what you expected to happen, and what actually happened.
•if possible, sample output illustrating the problem.
