Rubbermaid Slim Jim User manual
Slim Jim®Recycling Station Assembly Guide
Attach Connector to Base
2. Slide connector upward until tabs click into place.
Align Base to Connector
1. Align connector underneath base rim, matching tabs to
respective holes.
Connect Additional Base
3. Lift second base on top of connector, pressing down on base to
snap tabs into place.
Parts Included:
Bases Billboards
Connectors Lid inserts
Lids Labels x10
Rubbermaid Commercial Products LLC
8900 Northpointe Executive Park Drive
Huntersville, NC 28078
Phone: 1-800-347-9800
www.rubbermaidcommercial.com
#2030658
Connect Lid Insert to Lids
6. Place lid insert on lid, ensuring the pegs snap into the lid’s
corresponding peg holes.
Attach Lids to Base
7. Place lids on top of the bases.
Slim Jim®Recycling Station Assembly Guide (continued)
Connect Billboards to Bases
5. Insert the tab on bottom of billboard into base handle until it
clicks into place.
Apply Labels to Billboards
4. Remove backing from label. Align the bottom edge of the label
with the raised line on the billboard. Place label and smooth upward
within the recessed area on billboard.
Table of contents
Other Rubbermaid Storage manuals
