Ruijie Networks Reyee EW User manual

Reyee EW PoC Guide
V1.0
Ruijie Networks
Fuzhou, China

2
Copyright Statement
Ruijie Networks©2013
Ruijie Networks reserves all copyrights of this document. Any reproduction, excerption, backup, modification,
transmission, translation or commercial use of this document or any portion of this document, in any form or by any
means, without the prior written consent of Ruijie Networks is prohibited.
Exemption Statement
This document is provided “as is”. The contents of this document are subject to change without any notice. Please obtain
the latest information through the Ruijie Networks website. Ruijie Networks endeavors to ensure content accuracy and
will not shoulder any responsibility for losses and damages caused due to content omissions, inaccuracies or errors.

3
Thank you for using our products.

Preface
This document providing technical guidance to help engineers test Router products. This
document may contain scenario, configuration, command, screenshot image, topology and any
related material. This document may not help to solve a similar case due any differences in the
real conditions.
Audience
⚫Network Engineers
⚫Network Administrator
Obtain Technical Assistance
⚫Ruijie Networks Websites: http://www.ruijienetworks.com
⚫Ruijie Service Portal: http://caseportal.ruijienetworks.com
Welcome to report error and give advice in any Ruijie manual to Ruijie Service Portal
Related Documents
Documents
Description
Command Reference
Describes the related configuration
commands, including command modes,
parameter descriptions, usage guides, and
related examples.
Hardware Installation and Reference Guide
Describes the functional and physical features
and provides the device installation steps,
hardware troubleshooting, module technical
specifications, and specifications and usage
guidelines for cables and connectors.

PoC Guide Reyee EW PoC Guide
4
Revision History
Date
Change contents
Reviser
2021.6
Initial publication V1.0
Ruijie GTAC

PoC Guide Reyee EW PoC Guide
5
Contents
Preface ............................................................................................................... 3
1.Reyee EW Testing List.................................................................................. 3
2.Testing Lists................................................................................................... 4
2.1 Management.......................................................................................................4
2.1.1 eWEB...................................................................................................................................4
2.2 Basic Feature .....................................................................................................5
2.2.1 Wizard .................................................................................................................................5
2.2.2 PPPoE .................................................................................................................................7
2.2.3 Wireless repeater .............................................................................................................9
2.2.4 Reyee mesh.....................................................................................................................11
2.2.5 Time Schedule ................................................................................................................13
2.2.6 Roaming ...........................................................................................................................17

1.Reyee EW Testing List
Note: Before PoC, please check whether the EW has been upgraded to the
latest firmware version via eWeb, the example to check firmware version is
shown below.
1. Steps for login eWeb is described in section 2.1.1 (Next page).
2. The example below refers to router model EW1200G PRO.
3. The eWeb interface may vary according to the model type.
Category
Test Item
Description
Pass
Fail
1. Management
WEB
Enable WEB and log into EW
successfully
2. Basic
Feature
Wizard
Complete the initial configuration
by setting IP address, SSID,
Country/Region/Time Zone
PPPoE
Obtaining an address via PPPoE
Wireless repeater
Access to another devices' Wi-Fi
to obtain the network
Reyee mesh
Establish a wireless connection
between a main router and a
secondary router, extending
network coverage
Time Schedule
Blocking users from accessing
the Internet for periods of time
Roaming
Test roaming feature between
Reyee mesh devices

PoC Guide Reyee EW PoC Guide
4
2.Testing Lists
2.1 Management
2.1.1 eWEB
Testing project
eWeb
Testing purpose
Enable WEB and log into router successfully
Testing
procedure and
expected results
1. Connect PC with EW through UTP cable as shown above. (in this
example, port Lan1 is connected)
2. Assign IP 192.168.120.2/24 to PC or set the DHCP mode to obtain
the IP address from EW1200G-PRO
3. Enter the default IP of Switch 192.168.120.1 in browser

PoC Guide Reyee EW PoC Guide
5
browser must be IE and other major browsers and open compatible mode
Measured record
Login eWeb successfully
Testing
conclusion
eWeb can be easily opened by simply enter 192.168.120.1 via
browser
2.2 Basic Feature
2.2.1 Wizard
Testing Project
Wizard
Testing Purpose
Complete the initial configuration by setting IP address, SSID, Co
utry/Region/TimeZone
Testing
procedure and
expected results
1. Power on the EW, connect EW to the Internet by net cable

PoC Guide Reyee EW PoC Guide
6
2. Select the method of obtaining an IP address
3. Configure SSID, Wi-Fi password, Management Password
4. Configure Coutry/Region/TimeZone
5. Applying configuration

PoC Guide Reyee EW PoC Guide
7
Measured record
Configure the IP address acquisition method as DHCP, SSID and
password, the administrative password is the same as the wifi
password
Testing conclusi
on
Initial configuration can be done via Wizard
2.2.2 PPPoE
Testing project
PPPoE
Testing purpose
Obtaining an address via PPPoE
Testing
procedure and
expected results
1. Connect EW to Internet.
2. WAN setting page, Internet method select “PPPoE”, fill in the
username and password

PoC Guide Reyee EW PoC Guide
8
3. Next, EW will try to connect to the PPPoE server and create a dial-
up port
When the PPPoE server is found, EW will use the configured
username and password for authentication.
4. Successful authentication will result in an IP address being
obtained from the PPPoE server
5. Ping 8.8.8.8, check EW network
Measured record
EW obtained IP address 10.44.66.100 via PPPoE
Testing conclusi
on
With the method of PPPoE, EW can successfully obtain an IP ad
dress and access the Internet.

PoC Guide Reyee EW PoC Guide
9
2.2.3 Wireless repeater
Testing project
Wireless repeater
Testing purpose
Access to another devices' Wi-Fi to obtain the network
Testing procedur
e and expected r
esults
1. On “EW1200G PRO”, select wireless repeater mode
2. Select primary SSID

PoC Guide Reyee EW PoC Guide
10
3. Fill in the password for the Primary SSID, set the local SSID to be
the same as the primary SSID or create a new SSID
When the establishment is successful, the SSID of the EW will be
changed to the same as the Primary SSID or NEW Wi-Fi
(depending on the previous operation)
4. Connect to EW Wi-Fi and you will see EW successfully obtain an
address in the wireless repeater configuration
5. View network status on EW Home page
6. Ping 8.8.8.8 on EW, Expected results: ping successfully
Measured record
EW1200 series connect to the uplink wireless device with wireless
repeater mode successfully

PoC Guide Reyee EW PoC Guide
11
Testing
conclusion
Slave device extend the coverage of the Master WiFi
2.2.4 Reyee mesh
Testing project
Reyee mesh
Testing purpose
Enables Zero-Configuration Networking for Pairing Multiple EW1200G
PRO to Complete Wi-Fi Coverage
Testing
procedure and
expected results
Wireless mesh:
1. Complete the “Wizard” configuration of the "Main" and connect to
the Internet
2. Press the "Pairing" button on the back of the main router (<1s),
power up the other routers and place them 2m away from the
main router. You will see the LED indicator quick flashing
3. After around 2 minutes the device LED stops flashing, indicates
that the mesh has been created. On “Main” Home page can see
“Repeater”
4. “Secondary” obtained IP address from “Main”, and synced
configure from “Main”, such as SSID

PoC Guide Reyee EW PoC Guide
12
Tips: Mesh slave ap is managed by the master AP and can not be
edited
locally.
5. Ping 8.8.8.8 on “Secondary”
Wired mesh
1. The two devices are powered on and the Secondary EW wan port
is connected to the Main EW Lan port, which will automatically
mesh and you will see the LED indicator quick flashing
2. After around 2 minutes the device LED stops flashing, indicates
that the mesh has been created. On “Main” Home page can see
“Repeater”
3. Click “Repeater” to enter Repeater List
4. Click “Manage” to enter the Secondary EW Management page

PoC Guide Reyee EW PoC Guide
13
5. In the Basic → Repeater of Secondary EW, the wired relay
established by wired automatic MESH is a status of success
6. Ping 8.8.8.8 on Secondary EW
Measured record
Mesh successfully and main router sync the configuration to
secondary one. Clients can connect to both the devices and access to
the internet
Testing
conclusion
Zero-configuration Slave device synchronizes the Master device's
configuration via mesh and extends Wi-Fi coverage
2.2.5 Time Schedule
Testing project
Time Schedule
Testing purpose
Blocking users from accessing the Internet for a period of time

PoC Guide Reyee EW PoC Guide
14
Testing
procedure and
expected results
1. Client connect the EW device’s WIFI, on EW Client page can see
client list, click “+Add Blocked Time” to set block time

PoC Guide Reyee EW PoC Guide
15
2. Add Rule
3. When the blocking time is not reached, customers access the
Internet normally

PoC Guide Reyee EW PoC Guide
16
4. When the time reaches the specified block time, it will block
completely within 40sec or so, client can access wifi but cannot
access the internet.
5. When the non-blocking time is reached, customer access to the
Internet will be fully restored within 40sec