Huawei HW-01H User manual

1
Thank you for purchasing the HW-01H. This HW-01H
brings you a high speed wireless network connection.
This document will help you understand your HW-01H so you can start using it right
away. Please read this document carefully before using your HW-01H.
For detailed instructions for logging in to the web management page, refer to "Logging
In to the Web Management Page" on page 15.

2
Getting to Know Your HW-01H
Note:
The HW-01H function descriptions and illustrations in this document are for your
reference only. The product you have purchased may vary.
Application Scenarios
Wi-Fi devices (such as smartphones, tablet computers, and game consoles) or
computers can all access the Internet through HW-01H. The specific connection
procedure depends on the operating system of the Wi-Fi device or computer. Establish
a connection according to your device's specific instructions.
To access the Internet through a USB port connection, install the driver according to the
instructions.

3
Scenario 1: Connecting multiple
devices through Wi-Fi
Scenario 2: Connecting multiple
devices through Wi-Fi and USB
simultaneously

4
Appearance
2
1
3
4
Power button
Lanyard hole
Screen
Micro USB port

5
Screen
Status bar
Character zone
When connect to 3G/LTE network, show the operator name
When connect to public Wi-Fi hotspot, show the SSID name of the hotspot
When SIM card is not normal, show "PIN1 code required"/"PIN unlock code
required";

6
Data usage information
If user set the data information, show used data and total data.If user turn off the display
of data on Home screen, hide this zone.
Power save settings
user can tap on to view information of “Power save settings”.
Wi-Fi connection guide
user can tap on to view information of "Wi-Fi connection guide".
SSID&password
user can tap on to set data of “Charging function”.
About
user can tap on to view device information.
Public WLAN
user can tap on to view information of “ Public WLAN setting”.

7
Menu
user can tap on to view more functions.
Signal icon
R: when in roaming status; Show network mode, including "3G/LTE".
: when connecting to public Wi-Fi hotspot.
Icon of traffic.
Show the icon when connect to network. When there is upload and download data the
icon changes color. When disconnect from network, hide the icon.
Time information

8
Wi-Fi
Wi-Fi turned on.
Number of connected Wi-Fi devices.
Wi-Fi Mode
USB
Show it when connected to USB cable and HW-01H supports Charging with standard
functions process. If connected to USB cable only for charging, hide this icon.
Battery : Battery level from low to high.
Overheating
If the device’s temperature is overheating in [48,54) degree and connect to network ,
show the icon.
% of current battery

9
Flying mode
If the device’s temperature is in [54,58) degree, show the icon.

10
SSID and Wireless Network Encryption Key
When a Wi-Fi device establishes a connection to the HW-01H for the first time, you may
need to enter the default Service Set Identifier (SSID) and wireless network encryption
key. These are printed on the HW-01H.
To view the current SSID and wireless network encryption key on the screen:
1. Press the Menu>SSID&password
on the homepage.
2. The SSID and Password display on the
screen.