Runco CinemaWall SP-42 User manual

CINEMAWALL™ PORTFOLIO
SP42, SP50, SP60,
SP42xa, SP50xa, SP60xa
PLASMA DISPLAY MONITORS

The CinemaWall™ Series includes Runco’s®
acclaimed Vivix®digital video processing.
This superior technology includes 3D scan
conversion with motion compensation
and 3:2 pulldown for excellent video
performance with both video-based and
film-based material.
All CinemaWall Series models offer Runco’s
WideVision™ 16:9 native widescreen
aspect ratio, provided by state-of-the-art Plasma
display panels. Runco’s discrete aspect ratio
control includes the VirtualWide®
mode to fill the 16:9 screen with standard
4:3 images without loss of picture quality,
eliminating annoying black side bars and
displaying any source material in full,
widescreen glory.
The CinemaWall Series products incorporate
the Imaging Science Foundation’s “ISF 3c”™
(Certified Calibration Configuration) setup
and calibration standards in the display’s
GUI menus to facilitate picture quality
conforming to the highest standards in
the industry.
SP-50

CINEMAWALL™ PORTFOLIO PLASMA DISPLAY MONITORS
unco® offers the broadest selection of flat panel plasma displays in the industry, and our CinemaWall™ portfolio includes models up to a 60-inch screen size to address the
needs of almost any application.
The SP-42, SP-50 and SP-60 are state-of-the-art high definition flat-panel plasma displays designed specifically for outstanding performance in a wide variety of
environments. These new plasma monitors offer legendary Runco picture quality far superior to that found in “mass market” plasma displays.
These displays have been skillfully engineered for the finest video performance. Their advanced design accommodates custom installation and every day operation with ease. At less than
5 inches thin they can be wall-mounted or used with a tabletop stand.
The 42-inch SP-42 has a resolution of 1024 x 768, and the 50-inch SP-50 and 60-inch SP-60 boast high definition resolution of 1365 x 768. Each has a DVI digital video input that is
HDCP compliant and enables a pure digital signal path for optimum image quality and compatibility.
Runco’s acclaimed Vivix® video processing includes 3:2 film detection circuitry and is incorporated into the plasma chassis on each of these CinemaWall models. This advanced
processing produces stunning video imagery, even elevating standard NTSC material to near high definition levels.
All CinemaWall plasmas feature multiple aspect ratio control with VirtualWide® to fill the 16:9 widescreen with standard 4:3 images and an RS-232 interface for home automation
system control versatility. Like every Runco product, they are engineered to Imaging Science Foundation™ (ISF) standards for superb picture quality, accurate gray scale and outstanding
color fidelity. ISF calibration controls are integrated to allow this advanced calibration facility to create a perfect image regardless of source or aspect ratio.
Every model in the CinemaWall portfolio is available with an optional table top stand or wall mount for maximum placement versatility.
For our customers in high-altitude regions we also offer all models in “xa” versions (eg. SP-60xa) with industry-leading high-altitude capability to more than 9000 ft. MSL. They are identical in
all other respects, sharing features and specifications with the standard-altitude models.

1195 NW Compton Drive, Beaverton, OR 97006
1-800-237-8626
www.runco.com
Specifications are subject to change without notice. Optional tabletop stand or wall mount available.
© 2008 Runco International, Inc. All rights reserved. CinemaWall, Vivix, WideVision, and VirtuaWide are trademarks of Runco International, Inc. ISF is a trademark of Imaging Science Foundation.
Theater installation photo courtesy of Genesis Audio & Video, Irvine, CA.
Specifications SP-42/SP-42xa SP-50/SP-50xa SP-60/SP-60xa
Native Resolution: 1024 x 768 1365 x 768 1365 x 768
Screen Size: 42 in. (diagonal) 50 in. (diagonal) 60 in. (diagonal)
Screen Aspect Ratio: 16:9 16:9 16:9
Available Aspect Ratios: 4:3, Letterbox, 16:9 Anamorphic, VirtualWide®4:3, Letterbox, 16:9 Anamorphic, VirtualWide 4:3, Letterbox, 16:9 Anamorphic, VirtualWide
Image Area (W x H inches) 36.28 x 20.29 43.45 x 24.40 51.93 x 29.21
DTV Compatibility: 480p, 720p, 1080i 480p, 720p, 1080i 480p, 720p, 1080i
Contrast Ratio: 1000:1 1000:1 1000:1
Data/Graphics
Compatibility:
640 x 400 to 1600 x 1200 640 x 400 to 1600 x 1200 640 x 400 to 1600 x 1200
Inputs: (1) RGB/Component (15-pin D-sub)
(2) DVI with HDCP, one also usable as computer input
(1) Composite Video or S-Video (switch-selectable)
(1) HD Component
(5) Audio (stereo mini-jack)
(1) RS-232 (9-pin D-sub female)
(1) RGB/Component (15-pin D-sub)
(2) DVI with HDCP, one also usable as computer input
(1) Composite Video or S-Video (switch-selectable)
(1) HD Component
(5) Audio (stereo mini-jack)
(1) RS-232 (9-pin D-sub female)
(1) RGB/Component (15-pin D-sub)
(2) DVI with HDCP, one also usable as computer input
(1) Composite Video or S-Video (switch-selectable)
(1) HD Component
(5) Audio (stereo mini-jack)
(1) RS-232 (9-pin D-sub female)
Outputs: (1) RGB (15-pin D-sub)
(1) Speaker Terminals (stereo pair)
(1) Audio (stereo mini-jack); 500 mV/ <5kΩ
(1) RGB (15-pin D-sub)
(1) Speaker Terminals (stereo pair)
(1) Audio (stereo mini-jack); 500 mV/ <5kΩ
(1) RGB (15-pin D-sub)
(1) Speaker Terminals (stereo pair)
(1) Audio (stereo mini-jack); 500 mV RMS / < 5 kΩ
Power Requirements: 100-240V AC, 50/60Hz 100-240V AC, 50/60Hz 100-240V AC, 50/60Hz
Power Consumption: 360 W (1.5 watts in standby), maximum 377 W (10 watts in standby), maximum 475 W (10 watts in standby), maximum
Operating Environment: 40°– 95°F (5°– 35°C), 20-80% Humidity (non-condensing)
Altitude = up to 6,000 feet (1,828m)
(xa) Model = up to 9,000 feet (2,743m)
40°– 95°F (5°– 35°C), 20-80% Humidity (non-condensing)
Altitude = up to 6,000 feet (1,828m)
(xa) Model = up to 9,000 feet (2,743m)
40°– 95°F (5°– 35°C), 20-80% Humidity (non-condensing)
Altitude = up to 6,000 feet (1,828m)
(xa) Model = up to 9,000 feet (2,743m)
Dimensions: Width: 41 1/2 in. (1054.10 mm)
Depth: 4 1/8 in. (105.00 mm)
Height: 25 3/8 in. (645.00 mm)
Weight: 83 lbs. (37.65 kg)
Width: 49 1/4 in. (1251.00 mm)
Depth: 4 1/8 in. (105.00 mm)
Height: 30 in. (762.00 mm)
Weight: 94.20 lbs. (42.73 kg)
Width: 58 11/16 in. (1489.71 mm)
Depth: 5 1/16 in. (128.27 mm)
Height: 35 5/8 in. (904.13 mm)
Weight: 150.50 lbs. (68.27 kg)
Limited Warranty: (3) Three years parts and labor (not including plasma glass panel) from
the date of delivery to the end user.
(1) One year parts and labor on the plasma glass panel from the date of
delivery to the end user.
(3) Three years parts and labor (not including plasma glass panel) from
the date of delivery to the end user.
(1) One year parts and labor on the plasma glass panel from the date of
delivery to the end user.
(3) Three years parts and labor (not including plasma glass panel) from
the date of delivery to the end user.
(1) One year parts and labor on the plasma glass panel from the date of
delivery to the end user.
1/08
Engineered for ISF®calibration.