Russell Hobbs RHNB10 Installation guide

INSTRUCTIONS AND WARRANTY
RHNB10
RUSSELL HOBBS
NUTRIBLEND
Thank you for purchasing the Russell Hobbs Nutriblend. Each unit has been

manufactured to ensure safety, reliability and ease of use. Before use, please read
these instructions carefully and keep them for further reference.
FEATURES OF THE RUSSELL HOBBS NUTRIBLEND
• Powerful 1000W motor
• Extracts the maximum amount of nutrients, vitamins, taste, and even enzymes from
ingredients.
• Perfect for trying to maintain a balanced diet with a busy lifestyle.
• Make delicious and healthy shakes, smoothies, soups and purees.
• Accessories include:
1 X 800ml BPA free drinking cup
1 x 1000ml BPA free drinking cup
1 x 500ml BPA free mill
1 x Milling blade
1 x Flip top cover
2 x Keep fresh lids
• Non-slip feet
IMPORTANT SAFEGUARDS
When using any electrical appliance, basic safety precautions should always be followed
including the following:
1. When using any electrical appliance, basic safety precautions should always be
followed including the following:
1. Please read the instructions carefully before using any appliance.
2. Always ensure that the voltage on the rating label corresponds to the mains voltage
in your home.
3. Incorrect operation and improper use can damage the appliance and cause injury to
the user.
4. The appliance is intended for household use only. Commercial use invalidates the
warranty and the supplier cannot be held responsible for injury or damage caused
when using the appliance for any other purpose than that intended.

5. Avoid any contact with moving parts.
6. This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
7. Children should be supervised to ensure that they do not play with the appliance.
8. Check the power cord and plug regularly for any damage. If the cord or the plug is
damaged, it must be replaced by the manufacturer or a qualified person in order to
avoid an electrical hazard.
9. Do not use the appliance if it has been dropped or damaged in any way. In case of
damage, take the unit in for examination and/or repair by an authorised service
agent.
10. To prevent the risk of electric shock, do not immerse or expose the motor assembly,
plug or the power cord to water or any other liquid.
11. Never immerse the unit in water or any other liquid for cleaning purposes.
12. Remove the plug from the socket by gripping the plug. Do not pull on the cord to
disconnect the appliance from the mains. Always unplug the unit when not in use,
before cleaning or when adding or removing parts.
13. The use of accessory attachments that are not recommended or supplied by the
manufacturer may result in injuries, fire or electric shock.
14. A short cord is provided to reduce the hazards resulting from becoming entangled in
or tripping over a longer cord.
15. Do not let the cord hang over the edge of a table or counter. Ensure that the cord is
not in a position where it can be pulled on inadvertently.
16. Do not allow the cord to touch hot surfaces and do not place on or near a hot gas or
electric burner or in a heated oven.
17. Do not use the appliance on a gas or electric cooking top or over or near an open
flame.
18. Use of an extension cord with this appliance is not recommended. However, if it is
necessary to use an extension lead, ensure that the lead is suited to the power
consumption of the appliance to avoid overheating of the extension cord, appliance
or plug point. Do not place the extension cord in a position where it can be pulled on
by children or animals or tripped over.
19. This appliance is not suitable for outdoor use. Do not use this appliance for anything
other than its intended use.

20. Do not carry the appliance by the power cord.
21. Do not leave this appliance unattended during use. Always unplug the unit when not
in use or before cleaning.
22. Always operate the appliance on a smooth, even, stable surface. Do not place the
unit on a hot surface.
23. The manufacturer does not accept responsibility for any damage or injury caused by
improper or incorrect use, or for repairs carried out by unauthorised personnel.
24. In case of technical problems, switch off the machine and do not attempt to repair it
yourself. Return the appliance to an authorised service facility for examination,
adjustment or repair. Always insist on the use of original spare parts. Failure to
comply with the above mentioned pre-cautions and instructions, could affect the
safe operation of this machine.
25. Take caution as attachments are interchangeable and blades are sharp. Use
extreme caution when handling the blades. Always hold the blades by the base of
the blade assembly.
26. Never operate the appliance when it is empty and without liquids or ingredients in
the blender.
27. Do not process hot foods or hot liquids.
28. Never attempt to remove the cup while the appliance is still running.
29. Never leave the appliance unattended while in use.
30. Remove all packaging material and labels from the appliance.
31. Cups, lids and attachments are all dishwasher safe. It is recommended that the lids
and attachments be placed on the top rack. Ensure that the attachments are
removed from the cups before placing in the dishwasher.

PARTS DIAGRAM
A. Flip top lid
B. Keep fresh lid
C. Milling blade
D. Nutriblend blade
E. 1000ml BPA free drinking cup
F. 800ml BPA free drinking cup
G. 500ml BPA free mill
H. Aluminium motor base
E
A
C
C
B
D
F
G
H

BEFORE FIRST USE
1. Remove all packaging material and labels from the appliance. Do not leave
protective packaging lying around, as it could be dangerous around infants.
2. Wash the lids, cups and attachments in warm, soapy water with a soft cloth. Use
caution when washing the blades as they are very sharp.
3. Rinse and dry thoroughly.
4. Cups, lids and attachments are all dishwasher safe. It is recommended that the lids
and attachments be placed on the top rack of the dishwasher. Ensure that the
attachments are removed from the cups before placing them in the dishwasher.
5. Wipe the motor base with a damp cloth.
OPERATING INSTRUCTIONS
IMPORTANT: The Nutriblend should not be operated for more than 3 minutes at a time.
After 3 minutes of operation the unit should be left to cool down for one minute. This is
known as one cycle, the Nutriblend can be used for ten consecutive cycles after which the
unit must be left to cool down for 30 minutes before the next operation.
A A A
1
2
4
5
3

1. Ensure the unit is unplugged. Place the motor base on a clean, dry and level
surface such as a counter or table top.
2. Add required ingredients to a drinking cup or mill. Do not fill the cups or mill past the
maximum level indicated.
3. Place the Nutriblend blade or milling blade onto the cup or mill and twist it into
place, ensure it is sealed tightly (Fig. 1).
4. Plug the unit into the power outlet and ensure the power is on.
5. Turn the cup upside down and place it onto the motor base, ensure the tabs on the
cup are aligned with the tabs on the motor base. Press the cup down and then turn
it clockwise until it is locked into place (Fig. 2 & 3). IMPORTANT: The unit will
automatically start as soon as the cup or mill is locked into place.
6. Once the desired consistency has been reached, stop the appliance by applying
pressure downwards onto the mill or cup and turning it anti-clockwise until the tabs
are aligned and the cup or mill springs out of place thus removing pressure from the
cup (Fig. 4 & 5).
7. Ensure the electrical outlet is switched off at the wall and unplug the unit.
8. Turn the cup upright and remove the blades by twisting the blade assembly
counterclockwise.
9. Place the desired lid on the drinking cup or mill.
TAKE NOTE:
The blender features a unique safety system that prevents damage to the unit’s motor and
drive system should the appliance be inadvertently overloaded. If the appliance has been
overloaded, the motor will stop working. To reset the appliance, follow the procedure
below:
1. Unplug the appliance from the electrical outlet.
2. Remove and empty the cup or mill and ensure that no object or ingredient is
jamming the blades.
3. Allow the appliance to cool for approximately 30 minutes and then proceed to use
the appliance as instructed above.
NUTRIBLEND RECIPES
Peanut Butter Hummus:
Ingredients:

1 can chickpeas
3 tbsp of rice milk or almond milk
2 tbsp peanut butter
½ a lemon’s juice
3 tbsp olive oil
2 gloves garlic
1 tsp paprika
Salt and pepper to taste
Method:
• Place all the ingredients in the nutriblend 800ml cup
• Blend until smooth
• Serve with freshly cut vegetables
Pina Colada style Mocktail:
Ingredients:
2 ripe bananas - frozen
½ cup fresh pineapple
200ml pineapple juice
200ml coconut water
100g crushed ice
2 tsp chia seed
Pineapple slice for garnish
Method:
• Place all the ingredients in the Nutriblend 800ml cup
• Blend until well combined
• Serve immediately with pineapple garnish
Breakfast power smoothie:
Ingredients:
½ cup oats
1 cup spinach
1 cup berries – preferably a mix of fresh raspberry, blue berry and mulberry

1 tbsp hemp seed
1 cup yoghurt
Method:
• Place all ingredients in the Nutriblend cup
• Blend until well combined
• Serve immediately
Super food smoothie
Ingredients:
3/4cup almond milk
1 date, pitted
1 tbsp hemp seed
½ banana
½ tbsp chia seed
¾ cup kale
¼ cup ice
1 tbsp raw honey
Method:
• Add all ingredient except the honey into the Nutriblend 800ml cup
• Blend until smooth
• Serve with drizzled honey over
Basil and cream cheese dip:
Ingredients:
1 cup yoghurt
1 cup cream cheese
½ cup feta
4 basil leaves
1 clove garlic
Salt and pepper to taste
Method:

• Place all the ingredients into the Nutriblend 500ml cup
• Blend until smooth.
• Chill until serving with freshly cut vegetables
Vitamin C, Goji berry boost:
Ingredients:
2 oranges, peeled and segmented
½ cup coconut milk
½ tsp turmeric
3 tbsp goji berries
½ tsp freshly chopped ginger
1 tbsp raw agave
¾ cup ice
Method:
• Add all the ingredients into the Nutriblend
• Blend until smooth
• Serve cold
Matcha and berry Popsicle:
Ingredients:
2 cups almond milk
2 cups frozen blueberries
1 banana frozen
1 tbsp matcha powder
1 tbsp chia seed
Pinch of cinnamon ground
Pinch of ginger, ground
½ cup extra blueberries
Method:
• Add all ingredients into the Nutrilblend 800ml cup
• Blend until smooth
• Add blueberries into your popsicle mould