Russell Hobbs Seal Fresh RHVS1CAN User manual

RHVS1CAN_IB_FA_120313
Seal FreSh
Vacuum caniSterS
RHVS1CAN
Congratulations on the purchase of your new Russell Hobbs vacuum canisters. Each unit is
manufactured to ensure safety and reliability. Before using these items for the first time, please
read the instructions carefully and keep it for future reference. Pass it on if you pass on the
items. When using the vacuum canisters, basic safety precautions should always be followed.
NOTE: All warranty and detailed instructions for this product can be found in the
Instruction booklet for the Russell Hobbs Seal Fresh Vacuum Sealer RHVS1
IMPORTANT: Only the Seal Fresh Vacuum Sealer RHVS1 supplied by Russell
Hobbs can be used with the vacuum canisters RHVS1CAN
1. Canister lid
2. Canister
3. Seal/Open dial
4. Hose Port
5. Hose
BEFORE FIRST USE
• Unpackyourcanisters.
• Removeallpackagingmaterialandanystickersfromtheproduct.
• Assomepartsmaybepackedseparately,checktoensureallitemshavebeenunpacked
before disposing of the packaging.
• Washallremovablepartsasinstructedinthe“CAREANDCLEANING”sectionofthismanual.
IMPORTANT: Do not submerge the canister lids in water, refer to the “CARE AND
CLEANING” section of this manual for full cleaning instructions.
• Drythoroughlybeforeuse.
2
1
4
3
5
inStructionS

2
ABOUT YOUR SEAL FRESH VACUUM CANISTERS
1. Place the items to be vacuumed sealed into the canister and leave at least 2.5cm of space
between the food/items and the cover rim.
2. Ensure the canister cover rim and canister gasket seal are completely clean.
3. Place the canister lid on the canister
4. Open the vacuum sealer unit lid and place the larger end of the hose (provided with the
canisters) into the air intake in the vacuum chamber area securely. Place the smaller end of
the hose into the hose port on the canister lid. Ensure the Seal/Open dial on canister lid is
turned to the Seal position.
CAUTION: If the sealing strip has been activated in the same vacuum sealing
session, do not touch, it becomes hot.
5. Press the canister switch (just above the air intake) to start vacuuming. To ensure there is no
air leaking between the cover and the canister, at the beginning of the vacuuming use your
hand to push the dial down. The vacuuming will stop automatically when enough vacuum
pressure is achieved.
6. Hold the canister lid down securely when you pull out the end of the hose. Ensure you hold
the dial in the seal position then rotate the end of the hose counter-clockwise while lifting it
out of the lid.
7. Your canister can be stored in the pantry, fridge and freezer, depending on the items
packaged.
OpENINg THE CANISTER AFTER VACUUM pACkAgINg
1. Inordertoopenthecanister,youneedtoreleasetheairrstbyturningtheSeal/Opendial
clockwise from Seal to Open.
2. Nowthattheairisreleased,simplypullothelid.
CARE AND CLEANINg
1. Canister bases (not lids) are top rack dishwasher safe. Alternatively wash the canister bases
in warm water with a mild dishwashing soap.
2. Canisterlidscanbewipeddownwithadampcloth.Donotimmerseinwater.
3. Wash the canister hose in warm water with a mild dishwashing soap.
4. Ensure the accessories are dried thoroughly before re-using.
5. Canisters are freezer safe.
TROUBLE SHOOTINg
The canister will not vacuum:
1. Makesurethehoseadaptorisrmlyconnectedbothtotheapplianceandthecanister.
2. Check if the knob of the canister to ensure it is set to the Seal position.
3. Check if there is any damage or cracks in the canister or lid, if yes, change it for a new one.
4. Check the function of the vacuum sealer.
5. Make sure the rim of the canister is clean.
If all the above situations are excluded, please contact customer service.
RUSSELLHOBBSandlogoareTradeMarksofSpectrumBrands,Inc.,oroneofitssubsidiaries.
©2013 Spectrum Brands, Inc.
www.russellhobbs.com.au
www.russellhobbs.co.nz