Russound BTA-1 User manual

BTA-1
Inline Bluetooth® Local Source Module
for A-BUS® Systems
Installation Manual
Safety Instructions
1. ReadInstructions - All the safety and operating instructions
should be read before the equipment is operated.
2. Retain Instructions - The safety and operating instructions
should be retained for future reference.
3. Heed Warnings - All warnings on the equipment in the
operating instructions should be adhered to.
4. Follow Instructions - Follow all operating and user
instructions.
5. Water and Moisture - The equipment should not be used
near water; for example, near a bathtub, washbowl, kitchen
sink, laundry tub, in a wet basement, or near a swimming
pool. Not for outdoor use.
6. Heat - The equipment should be situated away from heat
sources such as radiators, heat registers, stoves, or other
equipment (including ampliers) that produce heat.
7. Power Sources - The product should be connected to a
power supply only of the type described in the operating
instructions or as marked on the equipment.
8. Grounding or Polarization - Precaution should be taken
so that the grounding or polarization means of the product
is not defeated.
9. Avoid spills and foreign objects. Ensure liquids and objects
don’t get into the product enclosure through any openings.
10. Damage Requiring Service - The equipment should
be serviced by qualied service personnel when: the power
supply cord or the plug has been damaged; objects have
fallen, liquid has been spilled into the equipment; the
equipment has been exposed to rain; the equipment does
not appear to operate normally; or the equipment has been
dropped or the enclosure is damaged.
11. Servicing - The user should not attempt to service
the equipment beyond that described in the operating
instructions. All other servicing should be referred to qualied
service personnel.
12. Care – From time to time you should wipe any dust
accumulation from the equipment with a soft dry cloth.
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC
rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment o and on, the user is encouraged to try to correct the
interference by one of or more of the following measures: reorient
or relocate the receiving antenna; increase the separation between
the equipment and receiver; connect the equipment into an outlet
on a circuit dierent from that to which the receiver is connected,
or consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
This device complies with Industry Canada licence-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause
undesired operation of the device.
Under Industry Canada regulations, this radio transmitter may only
operate using an antenna of a type and maximum (or lesser) gain
approved for the transmitter by Industry Canada.
To reduce potential radio interference to other users, the antenna
type and its gain should be so chosen that the equivalent isotropically
radiated power (e.i.r.p.) is not more than that necessary for successful
communication.
Cet appareil numérique de la classe B est conforme à la norme NMB-
003 du Canada.
Le présent appareil est conforme aux CNR d’Industrie Canada
applicables aux appareils radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas
produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter
tout brouillage radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement.
Conformément à la réglementation d’Industrie Canada, le présent
émetteur radio peut fonctionner avec une antenne d’un type et d’un
gain maximal (ou inférieur) approuvé pour l’émetteur par Industrie
Canada.
Dans le but de réduire les risques de brouillage radioélectrique à
l’intention des autres utilisateurs, il faut choisir le type d’antenne et
son gain de sorte que la puissance isotrope rayonnée équivalente
(p.i.r.e.) ne dépasse pas l’intensité nécessaire à l’établissement d’une
communication satisfaisante.
Specications
BTA-1 Inline Bluetooth® Local Source Module
Power requirements: 24VDC, 15mA
Frequency: 2402 to 2483.5 MHz
CAT-5 connection: RJ-45 (T568A standard)
Dimensions: 68mm x 57mm x 23mm (W x D x H)
Weight: 3.1 ounces
Max cable length: Inline device (Maintain 150’ total
maximum length CAT-5 between A-BUS
hub and A-BUS keypad)
Overview
The BTA-1 Bluetooth Module is an A-BUS compatible Local
Source Module that enables the use of a portable media
player, smartphone, or other Bluetooth equipped device to
wirelessly transmit audio content to an A-BUS keypad. Like
all A-BUS Local Source Modules, the BTA-1 will interrupt
any audio signal that precedes it automatically when in
use. It easily integrates with existing systems and does not
require dedicated wiring. It is installed anywhere inline of the
CAT-5 cable between the A-BUS keypad and hub or controller.
There are no other connections or power supplies required.
It can even be programmed with a custom name for easy
identication using a supplied USB cable and a free software
download from Russound.
Russound, Inc. 5 Forbes Rd., Newmarket, NH 03857, USA
tel [phone] • fax [phone] www.russound.com
technical support: 866.888.7466 e-mail: [email protected]
28-1370 08/23/13 Rev3

Connection Instructions
Read all instructions before starting the installation.
Determine the ideal location for the BTA-1 Inline Bluetooth
Local Source Module, keeping in mind that structural
elements, concrete, and other 2.4 gHz transmitters may
interfere with the signal. The BTA-1 Inline Bluetooth Local
Source Module may be located anywhere inline between
the A-BUS® hub/controller and A-BUS keypad. It will work
with other inline A-BUS local source modules noting that the
one closest to the keypad will have priority. The BTA-1 Inline
Bluetooth Local Source Module can be programmed with a
custom name using a supplied USB cable. If custom name has
not been programmed before installation, the BTA-1 should
be accessible to do so after installation.
Route a single CAT-5 cable from the A-BUS Audio
Distribution Hub to the BTA-1 Inline Bluetooth Local Source
Module location. Then route another single CAT-5 cable from
the BTA-1 to the A-BUS keypad or another A-BUS local source
module if used (i.e. A-LC3). Terminate the end of the CAT-5
cables connected to the BTA-1 with RJ-45 plugs using the
T568A standard wiring conguration. Once connected to the
A-BUS hub, the blue LED will light (solid) indicating the local
source module is powered and ready to be paired to your
Bluetooth enabled device.
Pass code and ID name
The default device ID name and password are “MA1227” and
“0000”, but you can modify this information using the supplied
USB cable and a computer running Windows® XP, Vista or 7.
Free programming software can be downloaded from the
Support Center at www.russound.com, along with instructions
to rename the BTA-1 for easy identication (ie. bedroom,
kitchen, outdoors, etc.).
Pairing your BTA-1
Turn on a Bluetooth enabled source (i.e. media player,
smartphone, or computer). Open the Bluetooth menu and
enable the Bluetooth pairing feature on the device. Select
the A-BUS Bluetooth product by its congured name from the
list of available Bluetooth products. Once paired, the blue LED
will blink once every three seconds to show there is an active
connection to the Bluetooth source.
Select the desired audio from the device and start the
playback. The blue LED will return to a solid blue state when
the connection is lost due to range limitation or disconnected
manually.
Testing
Turn on the A-BUS keypad then connect to the BTA-1 with
the Bluetooth enabled source device. Start music playback
and use the Bluetooth source to change the audio content.
Disable Bluetooth on the source device then re-enable it.
Reconnect to the BTA-1 and recheck all functions.
Normal Use
Only one device at a time may be actively paired with the
BTA-1. Activate the Bluetooth feature from the source device
and connect or ‘pair’ with the BTA-1 selecting its assigned
name. Choose your music and start playing. The BTA-1 will
automatically override any audio signal that precedes it in the
system. Note that any additional local source modules in line
between the BTA-1 and the A-BUS keypad will override the
BTA-1 audio. When nished, disconnect your device from the
BTA-1 or turn o the Bluetooth feature of the source device.
If you move your device out of range from the module it
will automatically sever the connection. If you are unable to
connect to the receiver, another device within range of the
receiver is probably connected.
Troubleshooting
My music is not coming out of the stereo speakers
Solutions
Ensure the A-BUS Amplied keypad is turned on and volume
is set at a suitable level and not muted.
Ensure the volume on your Bluetooth enabled source i.e.
media player, smartphone, or computer is set to a suitable
level.
Ensure the RJ-45 input and output cables are correctly and
rmly connected to the BTA-1.
Ensure your Bluetooth enabled source i.e. media player,
smartphone, or computer is within the 50 ft. (15m) range of
the BTA-1 module.
Ensure the BTA-1 module is powered and the blue LED is
solid (device not connected to a Bluetooth enabled device).
Ensure the BTA-1 module is powered and the blue LED is
ashing once every three seconds (indicating your device is
connected via Bluetooth technology).
Connection Diagram
/ / /
/
Copyright ©2012 Russound® All rights reserved. All trademarks are
the property of their respective owners. Russound is not responsible
for typographical errors or omissions. Specications are subject to
change without notice.
The Bluetooth® word mark and logos are registered trademarks
owned by Bluetooth SIG, Inc. and any use of such marks by Russond
is under license. Other trademarks and trade names are those of their
respective owners.
Limited Warranty
The Russound BTA-1 is fully guaranteed for two (2) years from the
date of purchase against all defects in materials and workmanship.
During this period Russound will replace any defective parts and
correct any defect in workmanship without charge for either parts or
labor. For this warranty to apply, the unit must be installed and used
according to its written instructions. If service is necessary, it must
be performed by Russound. Russound assumes no responsibility for
defects resulting from abuse or servicing performed by an agency or
person not specically authorized in writing by Russound. Damage to
or destruction of components due to improper use voids the warranty.
In these cases the repair will be made at the owner’s expense.
Accidental damage and shipping damage are not considered defects
under the terms of the warranty. To return for repairs, the unit must
be shipped to Russound at the owner’s expense, along with a Return
Authorization number and documentation explaining the nature
of the service required. Any product returned without prior written
permission will be returned to sender. Russound sells products only
through authorized Dealers and Distributors to ensure that customers
obtain proper support and service. Any Russound product purchased
from an unauthorized dealer or other source, including retailers,
mail order sellers and online sellers will not be honored or serviced
under existing Russound warranty policy. Any sale of products by an
unauthorized source or other manner not authorized by Russound
shall void the warranty on the applicable product.
Hub
CommonIR
12VDC
Trig ger Ou t
100mA
Outputs to Keypads
1234
5678
Page
In Page Trim
Mute In
Source Audio Connections
123456
R
L
Out
In
IR
R
L
Out
In
IR
R
L
Out
In
IR
R
L
Out
In
IR
R
L
Out
In
IR
R
L
Out
In
IR
Control Link
In Out
Src Trim Src Trim Src Trim Src Trim Src Trim Src Trim
A-C68 (or any A-BUS hub)
CAT-5
A-BUS Amplied Keypad
BTA-1
CAT-5
CAT-5 Cable 150’Max Length (Total)
A-BUS is a registered trademark of LeisureTech Electronics Pty
Ltd Australia. This product may be covered by one or more of the
following patents: US #7,181,023, #6,389,139; EP #1004222, AU
#739808, NZ #502982, Mexico #241196, Canada #CA2301062.