Russound Decora ComPoint User manual

ISSP ComPoint™Speaker
Instruction Manual
Product Overview
The ISSP ComPoint™Speaker is a Decora®-style in-
wall speaker for use with the Russound ComPoint
intercom system. It installs beside a ComPoint key-
pad in a double-gang wall box.
The ISSP allows ComPoint to be used as a stand-
alone system. It also provides intercom capability in a
room that is not included in a multiroom audio sys-
tem, or where it is not feasible to connect the keypad
to speakers installed in the room.
The high-quality driver in the ISSP is ideally matched
to the keypad amplifier. Its moisture-resistant design
makes it suitable for use in bathrooms and kitchens.
l~Russound ®
~--·················
.................•••
•...................
....................
••••••••••••••••••••
....................
••••••••••••••••••••
.................•••
....................
....................
•...................
....................
••••••••••••••••••••
.................•••
....................
.................•••
....................
....................
••••••••••••••••••••
....................
••••••••••••••••••••
.................•••
•...................
....................
•...................
....................
••••••••••••••••••••
.................•••
....................
....................
....................
....................
••••••••••••••••••••
....................
••••••••••••••••••••
.................•••
....................
....................
....................
....................
••••••••••••••••••••
.................•••
....................
....................
•...................
....................
••••••••••••••••••••
~-•-• .. • .. • .. • .. • .. • .. • .. • .. • .. • .. • .. • .. • .. • .. • .. • .. • .. •

Installation
The ISSP Speaker is designed to be located adjacent
to a ComPoint keypad in a double-gang wall box. It
can also be located in a separate single-gang wall
box and connected to the keypad with a length of
speaker cable spliced to the attached leads.
Connect the two leads from the ISSP to either the left
or right channel output on the keypad. Observe prop-
er polarity by connecting the red wire to a positive (+)
terminal and the black wire to a negative (–) terminal.
On the other channel output, short the speaker termi-
nals with a jumper. This is necessary because both
channels of the keypad amplifier must be connected
to produce an output signal, since the left and right
channel outputs are wired in series.
Specifications
Device: Single-gang Decora®-style in-wall*
Grille: Perforated aluminum
Driver: 1.25” x 2.5” (3.2 x 6.4 cm)
water-resistant treated paper cone
Connection: Attached wire leads
Power rating: 2 watts nominal, 5 watts maximum
Impedance: 8 ohms
Sensitivity: 86 dB SPL ± 3 dB at 1 watt/1 meter
Frequency response: 240 Hz – 15 kHz ± 10 dB
Dimensions: 1.65” W x 4.13” H x 1.42” D
(4.2 x 10.5 x 3.6 cm)
Weight: 3 oz (85 g)
*Wall plate not included

Typical Application
Connection Diagram
OUT IN
L+ L- R- R+ L+ L- R- R+
Shorting
jumper
ISSP connected to one channel output with shorting jumper on the other channel
ISSP installed beside an ISK2 Advanced Keypad
C• .... ,..... -.
I ■ :::a :::= ==
0
-···················
••••••••••••••••••••
••••••••••••••••••••
••••••••••••••••••••
••••••••••••••••••••
••••••••••••••••••••
••••••••••••••••••••
• •••••••••••••••••••
••••••••••••••••••••
••••••••••••••••••••
••••••••••••••••••••
••••••••••••••••••••
••••••••••••••••••••
••••••••••••••••••••
••••••••••••••••••••
••••••••••••••••••••
••••••••••••••••••••
••••••••••••••••••••
••••••••••••••••••••
••••••••••••••••••••
••••••••••••••••••••
••••••••••••••••••••
••••••••••••••••••••
••••••••••••••••••••
••••••••••••••••••••
••••••••••••••••••••
••••••••••••••••••••
••••••••••••••••••••
••••••••••••••••••••
••••••••••••••••••••
••••••••••••••••••••
••••••••••••••••••••
••••••••••••••••••••
••••••••••••••••••••
••••••••••••••••••••
••••••••••••••••••••
••••••••••••••••••••
••••••••••••••••••••
••••••••••••••••••••
••••••••••••••••••••
••••••••••••••••••••
••••••••••••••••••••
••••••••••••••••••••
••••••••••••••••••••
••••••••••••••••••••
••••••••••••••••••••
••••••••••••••••••••
• .. • .. • .. • .. • .. • .. • .. • .. • .. • .. • .. • .. • .. • .. • .. • .. • .. • .. • .. •
0
0

Safety Instructions
1. Read these instructions.
2. Keep these instructions
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accor-
dance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding plug. A polarized plug has two blades with
one wider than the other. A grounding plug has two
blades and a third grounding prong. The wide blade or
the third prong is provided for your safety. If the provid-
ed plug does not fit into your outlet, consult an electri-
cian for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or
pinched, particularly at plugs, convenience receptacles,
and the point where it exits from the apparatus.
11. Use only attachments or accessories specified by the
manufacturer.
12.Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer or sold with the appara-
tus. When a cart is used, use caution when moving the
cart-apparatus combination to avoid injury from tip-over.
13.Unplug this apparatus during lightning storms or when
unused for long periods of time.
14.Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been dam-
aged in any way, such as the power supply cord or plug
is damaged, liquid has been spilled or objects have fall-
en into the apparatus, or the apparatus has been
exposed to rain or moisture, does not operate normally,
or has been dropped.
If you have any questions, call Russound at
1.800.638.8055 or 603.659.5170.

5 Forbes Road, Newmarket NH 03857 USA
Tel [phone] • Fax [phone]
www.russound.com
Warranty
The Russound ISSP is fully guaranteed against all defects in
materials and workmanship for two (2) years from the date of
purchase. During this period, Russound will replace any defec-
tive parts and correct any defect in workmanship without charge
for either parts or labor.
For this warranty to apply, the unit must be installed and used
according to its written instructions. If service is necessary, it
must be performed by Russound. The unit must be returned to
Russound at the owner's expense and with prior written permis-
sion. Accidental damage and shipping damage are not consid-
ered defects, nor is damage resulting from abuse or from serv-
icing by an agency or person not specifically authorized in writ-
ing by Russound.
This warranty does not cover: damage caused by abuse, acci-
dent, misuse, negligence, or improper installation or operation;
power surges and lightning strikes; normal wear and mainte-
nance; products that have been altered or modified; any product
whose identifying number, decal, serial number, etc. has been
altered, defaced or removed.
Russound sells products only through authorized dealers and
distributors to ensure that customers obtain proper support and
service. Any Russound product purchased from an unauthorized
dealer or other source, including retailers, mail order sellers and
online sellers will not be honored or serviced under existing
Russound warranty policy. Any sale of products by an unautho-
rized source or other manner not authorized by Russound shall
void the warranty on the applicable product.
Damage to or destruction of components due to application of
excessive power voids the warranty on those parts. In these
cases, repairs will be made on the basis or the retail value of the
parts and labor. To return for repairs, the unit must be shipped
to Russound at the owner's expense, along with a note explain-
ing the nature of service required. Be sure to pack the unit in a
corrugated container with at least three (3) inches of resilient
material to protect the unit from damage in transit.
Before returning a unit, call Russound at 603.659.5170 for a
return authorization number. Write this number on the shipping
label and ship to: Russound, 5 Forbes Road, Newmarket, NH
03857.
Copyright © 2006 Russound. All rights reserved. All trademarks are the
property of their respective owners. Specifications are subject to change with-
out notice. Russound is not responsible for typographical errors or omissions.
28-1241 Revision 1 06/15/06
l ~Russound®

Russound’s ComPoint®system provides
doorbell, paging and true point-to-point
intercom features with high-fidelity sound.
Based on a six-zone configuration, the
system can expand to 36 zones.
The system can share speakers with
a multiroom audio system or use
dedicated in-wall, in-ceiling, or surface-
mount speakers. A convenient in-wall
speaker is available for mounting next
to the ComPoint keypads. Amplifiers
built into the keypads provide power for
communications.
ComPoint offers two keypad styles: a
basic model for systems up to six zones
and an advanced model for any size
system. The advanced keypad features
an LCD panel to display assignable room
names. Both keypad models are available
in five decorator colors and have installer-
selectable amber or green backlighting.
ComPoint also offers two weather
resistant door stations in brass and
chrome finishes, one of which includes a
low-light security camera. A door strike
release module is available for switching a
separate unit to unlock the door.
With ComPoint, you can have separate
doorbell chimes for two doors. You have a
choice of seven different chime tones that
your installer can assign. Or you can use a
separate doorbell system if you prefer.
Additional features include a Do Not
Disturb mode for zone privacy and a
Listen mode, which allows listening to one
zone from any other zone.
Data Sheet
ComPoint®Intercom System
The music lover’s intercom solution
123456
RS232
INTERFACE
IN OUT A-BUS READY SUB-ZONES
OUT INTRIGGER VIDEO AUDIO
GAIN
IN
IR IR IR IR IR IR
AC240V~
Serial#
AC110V~
IN IN
OUT
1432
24VDC 2.5A
OUT OUT OUT OUT OUT OUT
R
L
V
R
L
V
R
L
V
R
L
V
PAGE
12VDC
ZONE AUDIO (TOAMP) & VIDEO OUTPUTS SOURCE AUDIO / VIDEO CONNECTIONS
ZONE OUTPUT TO8 OHM SPEAKERS
R
L
V
R
L
V
456123
ININININININ
1 2 3 4 5 6
ZONE 12V TRIGGER
1 2 3 4 5 6
R
L
V
R
L
V
NEWMARKET,
NH U.S.A.
CAV6.6
R- R+L+ L- R- R+L+ L- R- R+L+ L- R- R+L+ L- R - R+L+ L- R- R+L+ L-
110V-F3A250V
240V-F1.25A250V
LINK
KEYPADPORTS
ISDR
(Optional)
846C
Power Supply
Front Door
Camera Output

5 Forbes Road, Newmarket, New Hampshire 03857 USA 603.659.5170 www.russound.com
Since 1967, innovation, quality and reliability have been the core of the Russound product tradition. Today, Russound offers everything for enjoying multiroom audio-video in your home. All
audio-video distributed solutions are built to high standards and designed with the unique consideration of making products that are a pleasure to live with and enjoy.
©2008 Russound. All rights reserved. All trademarks are the property of their respective owners. Specifications are subject to change without notice.
Russound is not responsible for typographical errors or omissions.
Specifications
Revision 3 03/08
System
Maximum zones: 36 (up to 6 hubs)
Door stations: 2 maximum
Communications cable: CAT-5/CAT-5e
Maximum cable length: 250 feet (76 m) per zone or door station
ISK1 Basic Keypad
User controls: 6 zone selection/indication keys
Talk key
2 door selection/indication keys
DND selection/indication key
Volume Up and Volume Down keys
Key backlighting: Installer-selectable amber or green, with red
function indication
Audio input: Built-in microphone with automatic gain control
Amplifier: Monaural (for system functions only)
Min. load impedance: 6 ohms per channel
Speaker relay: 4-pole double-throw
Speaker relay rating: 50 watts RMS continuous
Speaker connector: 8-pole screw terminal
Speaker wire size: Up to 14 AWG (1.63 mm)
CAT-5 connector: 110 punch-down block
Power consumption: 15 VDC 800 mA maximum, 200 mA typical
Keypad style: Single-gang Decora®
Available colors: White/almond, bone, brown, black
Dimensions: 1.875” W x 4.188” H x 2.5” D
(4.8 x 10.6 x 6.4 cm)
Weight: 4.8 oz (136 g)
ISK2 Advanced Keypad
Display: 5-character backlit LCD panel
User controls: Talk key
Next and Previous keys
DND selection/indication key
Volume Up and Volume Down keys
Backlighting: Installer-selectable amber or green, with red
function indication
Audio input: Built-in microphone with automatic gain control
Amplifier: Monaural (for system functions only)
Min. load impedance: 6 ohms per channel
Speaker relay: 4-pole double-throw
Speaker relay rating: 50 watts RMS continuous
Speaker connector: 8-pole screw terminal
Speaker wire size: Up to 14 AWG (1.63 mm)
CAT-5 connector: 110 punch-down block
Power consumption: 15 VDC 800 mA maximum, 200 mA typical
Keypad style: Single-gang Decora®
Available colors: White/almond, bone, brown, black
Dimensions: 1.875” W x 4.188” H x 2.625” D
(4.8 x 10.6 x 6.7 cm)
Weight: 5.6 oz (159 g)
ISH1 Hub
Keypad ports: (6) 8-pole modular RJ-45
Door station ports: (2) 8-pole modular RJ-45
Link ports: (2) 8-pole modular RJ-45
Update port: 4-pole port for Programming Cable, Russound
part #2500-521065
Switches: 4-switch DIP for hub ID setting
8-switch DIP for 2 doorbell settings
Potentiometer for doorbell volume
Doorbell options: 7 selectable chime patterns plus no chime
Power requirement: 15 VDC 3.5 A (Use model ISPS power supply)
Mounting method: Surface or structured wiring panel
Dimensions: 6.438” W x 5.125” H x 1.813” D
(16.4 x 13.0 x 4.6 cm)
Weight: 25.6 oz (0.73 kg)
ISK3 Door Station
User control: Call key with amber backlight
Audio input: Built-in microphone with automatic gain control
Amplifier: Monaural (for system functions only)
Volume control: Installer-adjustable potentiometer
Audio output: Built-in speaker
Cover plate: Weatherproof plated die-cast zinc
CAT-5 connector: 110 punch-down block
Doorbell connector: 2-pole screw terminal
Doorbell wire size: Up to 18 AWG (1.024 mm)
Doorbell contact: 1 A @ 12 VDC
Power consumption: 15 VDC 220 mA maximum
Available finishes: Polished brass, antique brass, brushed chrome
Overall dimensions: 3” W x 5.125” H x 3.25” D (7.6 x 13.0 x 8.3 cm)
Dimensions in wall box: 2” W x 2.875” H x 2.75” D (5.1 x 7.3 x 7.0 cm)
Wall box required: Single gang, 22 cu in (360 cm3) min. volume
Weight: 8 oz (227 g)
ISK4 Camera Door Station
User control: Call button with amber backlight
Audio input: Built-in microphone with automatic gain control
Amplifier: Monaural (for system functions only)
Volume control: Installer-adjustable potentiometer
Audio output: Built-in speaker
Video output: Composite, 75 ohms unbalanced
Camera resolution: 600 horizontal lines
Camera sensitivity: 0.1 lux minimum illumination
Cover plate: Weatherproof plated die-cast zinc
Intercom CAT-5 connector: 110 punch-down block
Doorbell connector: 2-pole screw terminal
Doorbell wire size: Up to 18 AWG (1.024 mm)
Doorbell contact: 1 A @ 12 VDC
Door station power requirement: 15 VDC 220 mA maximum (provided from hub)
Camera power requirement: 12 VDC regulated, 100 mA
(use Russound 846C power supply)
Available finishes: Antique brass, brushed chrome
Dimensions: 4.8” W × 5.8” H × 2.9” D (12.1 × 14.8 × 7.3 cm)
Fits UL/CSA-approved double-gang
32 ci (524 cm3) wall box
Weight: 15.8 oz (448 g)
ISSP Speaker
Device type: Single-gang Decora®-style in-wall
Grille: Perforated aluminum
Driver: 1.25” x 2.5” (3.2 x 6.4 cm)
water-resistant treated paper cone
Connection: Attached wire leads
Power rating: 2 watts nominal, 5 watts maximum
Impedance: 8 ohms
Sensitivity: 86 dB SPL ± 3 dB at 1 watt/1 meter
Frequency response: 240 Hz – 15 kHz ± 10 dB
Available colors: White/almond
Dimensions: 1.65” W x 4.13” H x 1.42” D
(4.2 x 10.5 x 3.6 cm)
Weight: 3 oz (85 g)
ISDR1 Door Strike Release Module
CAT-5 connectors: (2) 110 punch-down blocks
Strike release relay: 1-pole double-throw (NC/NO)
Relay connector: Removable 3-pole screw terminal
Relay wire size: Up to 14 AWG (1.63 mm)
Relay contact rating: 5 A @ 12 VDC
Mounting method: Surface
Dimensions: 3” W x 1.875” H x 1” D (7.6 x 4.8 x 2.5 cm)
Weight: 4.8 oz (136 g)