Rutland County Garden Furniture Bisbrooke User manual

Assembly Instructions
Bisbrooke disabled access
picnic bench
1
Before you commence the assembly process, we recommend that you read these instructions
thoroughly beforehand to familiarise yourself with the assembly process and to also check that you have
the correct components. If for any reason you need assistance, you can find our contact details on the
final page of these instructions.
We highly recommend that any assembly is carried out on a flat, level surface if possible and that you
use another person to assist you if necessary.
Package contents
Tools required
1 x Table Top
2 x Seats
3 x A frames 2 x Seats
2 x Cross Braces 2 x A frames
16 x M8 Coach Screws (70mm)
4 x M8 Coach Screws (60mm)
28 x Cover Caps
10mm socket or spanner
The Bisbrooke disabled access picnic bench

Bisbrooke disabled access picnic bench
Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,
Aslackby, Sleaford, Lincs, NG34 0HZ.
Company No: 7670072 VAT No: 151744027
2
Step 1
Step 2
Ensure that you have all of the correct parts as listed
on the front page of these instructions, including any
fixings.
Lay the table top upside down on a clean, flat surface
taking care not to damage it.
Step 3
Step 4
Place one of the table A-frames centrally against the
fixing batten ensuring that the gap at the table edge
is the same on both sides.
Using 2 of the supplied 70mm coach screws and the
pre drilled holes, secure the table A-frame to the
fixing batten on the table top.

Bisbrooke disabled access picnic bench
Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,
Aslackby, Sleaford, Lincs, NG34 0HZ.
Company No: 7670072 VAT No: 151744027
3
Step 5
Step 6
Repeat steps 3 & 4 for the remaining 2 A-frames so
that they match the image above and the centre A-
frame is oriented as shown.
Position one of the braces as shown ensuring that it is
aligned centrally along the table top and that it is
flush with the A-frame before proceeding to step 7.
Step 7
Step 8
Secure the brace to the A-frame using one of the
60mm coach screws and secure the other end to the
table top using another 60mm coach screw as
indicated in step 6.
Repeat steps 6 & 7 for the other end of the bench so
that both braces are connected.

Bisbrooke disabled access picnic bench
Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,
Aslackby, Sleaford, Lincs, NG34 0HZ.
Company No: 7670072 VAT No: 151744027
4
Step 9
Step 10
Now turn the bench assembly right side up ready to
attach the seats.
Line up the short seat panel as shown and attach to
the A-frame with 2 x 70mm coach screws in each end.
Step 11
Step 12
Line up the longer seat panel in the same way as step
10 and attach to the A-frame with 2 x 70mm coach
screws in each end plus a further 2 x 70mm coach
screws to attach it to the central A-frame as shown
above.
Finally, cover any exposed coach screw heads with
the cover caps provided. Your Bisbrooke disabled
access picnic bench is now complete.
We hope that you found your product quick and easy to assemble but if not and you require any
further assistance or have any questions you can contact us by telephone on: 01778 440803
Email: [email protected]
www.rutlandcountygardenfurniture.co.uk