RYNO WORX RY10MK User manual

Operator's Manual
Model: RY10MK
MPN: RA-MLT-0012
10 Gallon Melter Kettle
Torch Model
For Technical Support Please Visit www.RynoWorx.com or Call 1-855-382-9611

⚠WARNING
⚠Read all instructions and warnings in this manual before attempting to operate this equipment.
⚠This equipment is designed for outdoor use only.
⚠Be sure to always wear personal protective equipment when operating this equipment.
⚠Improper assembly may be dangerous. Please follow the assembly instructions in this manual. Make sure all parts are
assembled and hardware is fully tightened before using. Make sure that there are no leaks in the liquid propane cylinder
connection or lines.
⚠Do not operate the equipment if a gas leak is present. (check for leaks and connections with every use)
⚠Do not attempt to disconnect the gas regulator from the tank or any gas fitting while the equipment is in use.
⚠A dented or rusty liquid propane tank may be hazardous and should be checked by your liquid propane supplier. Do
not use a liquid propane tank with a damaged valve.
⚠Ensure that your propane cylinder is within its expiry date for your local jurisdiction. If the tank has expired it must be
properly requalified to continue using.
⚠Do not store spare liquid propane cylinders within 10 feet (3m) of this equipment.
⚠Do not store or use gasoline or other flammable liquids or vapors within 25 feet (8m) of this equipment.
⚠Before servicing, make sure the unit is fully cooled and the liquid propane cylinder is disconnected.
⚠Only genuine RynoWorx replacement parts should be used for any replacements or repairs. Do not attempt to modify
or alter this product in any way.
⚠Do not attempt to make any repairs to gas carrying, gas burning, igniter components or structural components. Your
actions, if you fail to follow this warning, may cause a fire, an explosion, or structural failure resulting in serious personal
injury or death as well as damage to property.
⚠Failure to follow these instructions could result in fire or explosion which could cause property damage, personal
injury or death.

No
P/N
Description
1
RA-VLV-0003
2" NPT Molasses Valve Assembly
2
RC-GCM-0010
Thermometer - 14" Probe - Shock Proof Liquid Filled
3
RC-FAB-0010
Thermometer Guard Bracket
4
RA-BAS-0048
Removable Lid Handle Assembly - 10MK
5
RC-FAB-0101
Melter Lid Support Slider
6
RC-FAB-0108
Agitation Sweep Bar - RY10MK
7
RA-GCM-0015
Torch Complete Assembly
MPN:
RA-MLT-0012
Model:
RY10MK
Description:
10 Gallon Melter Kettle Torch Model

•Replacement Parts
RA-GCM-0010 - Thermometer - 14" Probe - Shock Proof
RA-VLV-0003 - 2" NPT Molasses Valve
RA-GCM-0015 - Torch Complete Assembly

RC-GCM-0068 - Regulator and Hose - 0 - 30 Psi with
Pressure Gauge (10’ Hose)
RC-GCM-0016 - Torch for Melter Applicator with Valve
RC-STK-0001 - Flint Striker