Ryonet Riley Hopkins User manual

Screen Printing Press Cart
With Screen & Supply Rack
Assembly instructions

Step 1.
Attach the cross bars to the cart using the supplied
1/4 x 1/2 inch long bolts and washers, using a 7/16
inch wrench or the supplied wrench.
Note: Logos, graphic elements and or photo images contained in this document may not be reproduced without written consent of Ryonet®
Step 2.
Attach the slotted side of the wheel supports with the
supplied 1/4 x 5/8 inch long bolts and anged nuts
through the bottom holes of the rack side assembly.
Stack washers as shown for proper spacing. Insert
casters through provided large spacer into xed nut
in the rack and tighten with supplied wrench. Flip cart
upright onto casters.
Step 3.
Attach the wooden top using the 3/8-16 x 1-1/14 inch
Flat Hex, screw all four corners using the supplied Hex
wrench.
12303 NE 56th St. | Vancouver, WA 98682 | 800-314-6390 | [e-mail]