PARTS LIST
INSTALLATION
1.) Place the vehicle in park on a flat level surface.
2.) Remove the 4 rear inner radius rod nuts using a 17mm socket and a 17mm wrench as backup.
(See picture A)
3.) Remove Bolts one at a time and replace with provided bolts, from opposite side (nut on
backside of Receiver Hitch) through S3 Receiver Hitch.
4.) Reinstall the nuts and tighten to factory torque specs. Red threadlocker is recommended.
5.) Test drive vehicle and check all hardware.
Thank you for choosing S3 Power Sports! Let us know if you have any questions! 855-221-7097
