www.rtv.sabaj.pl
5
6. Controlling rotation
- Press and hold for at least 3 seconds setup button inside the sleeve of the stand
(Figure 3)
- Blue LED lights up the front of the rack - this means that stand is waiting for a signal from
the remote IR control
- aim the remote at the LED and press the button which you want to turn to the left
* LED will blink 5 times
- aim the remote at the LED and press the button which you want to turn to the right
* LED will blink 5 times
- aim the remote at the LED and press the button you want to assign back to center
* LED turns off
