SACKit WOOFit Go XQ User manual

WOOFit Go XQ
USER MANUAL

THANK YOU!
Thank you for purchasing this WOOFit Go XQ Bluetooth speaker
from SACKit. Please read the enre user manual before using the
product, and save it for future reference. We reserve the right
for errors in text or images, and any necessary changes made to
technical data. If you have quesons regarding technical problems
please contact our customer services at inf[email protected]. We hope
you will enjoy your new WOOFit Go XQ.
Enjoy great sound on the Go!
2

BOX CONTENTS
1 x WOOFit Go XQ speaker
1 x Quick start guide
1 x USB charging cable
QUICK START GUIDE
Play music via Bluetooth
1. Charge the speaker for at least 2 hours
2. Turn on the speaker clicking the Power Buon
3. Turn on Bluetooth on the device, you want to connect to the speaker
4. Choose ”WOOFit Go XQ” in the Bluetooth sengs on your device
5. Start playing music from your device
6. Nod your head and dance
Connect two WOOFit Go XQ speakers
If you have two WOOFit Go XQ speakers, it is possible to connect them
into a stereo pair, see page 6.
3

4
Power
buon
Micro USB
charging input

5
CHARGING THE SPEAKER
1. Before you use the speaker the rst me, please charge the speaker
using a wireless charger or use the included USB charging cable to
charge the WOOFit Go XQ speaker fully.
2. When charging, a red indicator light is ashing. When fully charged, the
red indicator light will turn o.
Note:
- Please do not charge the speaker while playing music
- Please use an appropriate adapter for charging
PLAY MUSIC VIA BLUETOOTH
1. Click the Power buon to turn on the speaker. The indicator light will
ash white, and you will hear a “beep” sound. This indicates that the
speaker is in Bluetooth pairing mode, and ready to connect.
2. Turn on Bluetooth on the device, you want to connect to the speaker
3. Choose ”WOOFit Go XQ” in the Bluetooth sengs on your device.
When pairing is successful, the indicator light shows a constant white
light, and you will hear the message “connected”
4. If you need to switch to another Bluetooth device, please double click
the Power buon to disconnect. The indicator light will start ashing,
and you can repeat the pairing process from step one
WOOFit Go XQ is automacally connected to your Bluetooth device, if
the Bluetooth pairing was successful before shutdown. The next me you
turn on the speaker, it will automacally be connected to your Bluetooth
device, and the indicator light will not ash.
Note: The WOOFit Go XQ speaker will automacally enter standby
mode aer 15 minutes of no acvity.

6
STEREO PAIRING:
CONNECTING TWO WOOFIT GO XQ SPEAKERS
If you have two WOOFit Go XQ speakers it is possible to create a stereo
pair with one speaker playing le channel, and one speaker playing right
channel. Before using the guide below, you must connect one speaker to
your Bluetooth device following the previous guide on how to play music
via Bluetooth.
1. Power on both speakers clicking the Power buon
2. Click the Power buon three mes to enter pairing mode (the
indicator light will ash green in correct pairing mode). Repeat this for
both speakers
3. The speakers will connect in a few seconds. A constant green
light indicates correct connecon, and you will hear the message
“connected”
FACTORY RESET OF WOOFIT GO XQ:
To reset WOOFit Go XQ you have two follow these steps:
1. When the speaker is powered on press the following combinaon
on the power buon: Double press, single press, double press, single
press
2. When the combinaon has been pressed correctly a number
combinaon would be heard from the speaker, this means that your
device has been reset

7
OPERATION INSTRUCTIONS
Short press/click: Power on
Long press: Power o
Short press three mes: Enter/exit stereo pairing of two WOOFit Go XQ
speakers
Receiving an incoming call while connected via Bluetooth:
Short press: Answer the call
Double click: Refuse to answer the call
End phone call while connected via Bluetooth:
Short press: End the call
Bluetooth connected:
Short press: Play/pause music
Double click: Disconnect Bluetooth
Bluetooth disconnected:
Double click: Automac connect back

8
CHANGING THE FRONT
Change up the look of your speaker with the changeable front – do you
want it classic chic, matching the color of your sofa or should it pop with an
eye-catching color? It’s up to you!
1. Remove the front by liing the right side of the front (you will nd a
small space between the frame and the front). You will be able to loosen
the front all the way around the edges and nally remove it completely.
Please note: The front is aached thoroughly to ensure sublime sound
quality
2. Aach the new front by placing the “scks” into the matching holes.
Press the front onto the speaker all the way around the edges - and
your new look it ready
CLEANING THE PRODUCT
1. Please turn o the speaker before cleaning it.
2. Do not use volale solvents (such as ethanol, rosin, toluene solvent) to
clean the speaker. This type of chemicals may damage the product.
3. Please use a damp coon- or microber cleaning cloth.
4. While cleaning the speaker, please be aware to avoid geng water into
the charging input and the speaker parts behind the changeable front.
Water and uids may cause malfuncon to the speaker.

9
TROUBLESHOOTING
If you have trouble operang the WOOFit Go XQ speaker, please search
the following opons for solving the problem. If the soluons below do
not help your problem, please contact customer service at inf[email protected].
No sound from my WOOFit Go XQ speaker
• Please make sure, that the speaker is charged
• Try to increase the volume on your Bluetooth device
• Please reselect the WOOFit Go XQ on your Bluetooth device
My WOOFit Go XQ speaker murmurs
• Please make sure that the speaker and your Bluetooth device is within
10 meters of each other
I cannot turn on/charge my WOOFit Go XQ
• Please make sure that the adapter and the charging cable is connected
correctly
• Please check the power adapter voltage and current demand
Bluetooth connecon failed
• Please make sure, that the WOOFit Go XQ speaker is in correct
Bluetooth pairing mode (indicator light ashing white). If the speaker
is not in correct pairing mode, please long press the Power buon
and pair again.
• Reconnect aer reboot
• Please make sure, that the speaker and your Bluetooth device is within
10 meters of each other
• Please make sure, that there is no obstrucons between the speaker
and your Bluetooth device
• Try connecng another Bluetooth device
I cannot operate my WOOFit Go XQ speaker
• Reset your WOOFit Go XQ speaker by turning on the speaker and
pressing the following combinaon on the POWER buon: double
press, single, double, single.

10
IMPORTANT SAFETY INFORMATION
Please read the following informaon and operate the speaker
and accessories accordingly to ensure correct and safe use of the
product. We are not responsible for damage caused by failure to
comply with the instrucons or irresponsible use of the product.
Damage caused by failure to comply with the instrucons will not be
covered by the warrant.
Warning
To prevent any res or electrical hazards please act according to the
following guidelines:
• Do not disassemble or replace any parts of this device. Please
contact professional maintenance or qualied service center if
there is any damage to the device
• Do not place this device in or close to sources of excessive heat
or re. (Such as: candles, replaces or direct sunlight)
• Please shut down the speaker in lightning weather
• Do not use excessive force when using the control buons
• If the product is below 5°C when you receive it, please open the
product packaging and wait for it to reach room temperature
• To prevent overheang, please do not install the speaker in
enclosed spaces. Be sure to set aside at least 10cm around the
product for venlaon
• Before the product is connected to a power supply socket, please
ensure that the voltage of the power supply and the speaker
matches. If the voltage does not match, do not connect the
speaker to the power socket

11
Disposal of the product
WOOFit Go X is made from recyclable and high-quality materials.
Do not dispose of the speaker together with other living garbage.
Please understand the local classicaon about collecng electro-
nical, electrical products that contains baeries. Correct disposal
of the product will help to prevent negave impact to the environ-
ment.
TECHNICAL SPECIFICATIONS
• Model: WOOFit Go X Bluetooth speaker
• Speaker: 1x1.5 inch fullrange speaker, 3.5 ohm
• Frequency response: 120Hz-16KHz (-10dB)
• Power amplier: Class D @3W x 1CH
• THD: < 10%
• SNR: ≥75dB(A)
• Play mode: Bluetooth
• Charging input: DC 5V, 1A (Micro USB)
• Wireless charging: Maximum received power 2.5 was
• Baery: Lithium baery 950mAh/3.7V
• Bluetooth version: V5.0
• Bluetooth maximum power transmied: <20 dBM
• Bluetooth frequency bands: 2402 - 2480 MHz
• Hands-free: DSP MIC hands-free system
• Product size: 98×90×44.5mm