Safavieh Furniture Amina ACH1303 User manual

CARE AND MAINTENANCE
NOTICE
HW2 Flat Washer(M8) 8X
BFront Leg 2X
HW1 Split Lock Washer(M8) 8X
CBack Leg 2X
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY
HW3 Socket Screws 8*1.25*65MM 8X
HW4 Allen Key 1X
ASeat 1X
Spot clean using a mild water-free solvent. Only a professional cleaner should
undertake a complete overall cleaning.
The use of steam or water-based cleaners may cause excessive shrinking or
staining.
* Please make sure that you have all parts indicated before you begin assembly of
this item
* This item should be assembled on a soft surface to prevent scratching the finish
during assembly
* This item may require periodic tightening ACH1303
Dimensions:26.57"WX29.92"DX31.5"H
Weight Capacity: 275 lbs
WARNING: DO NOT STAND ON CHAIR
WARNING: DO NOT OVER TORQUE BOLTS/SCREWS
The legs and hardware are located underneath the
bench in the zipper compartment
FURNITURE

PREPARATION
The legs and hardware are located underneath the chair in the zipper compartment.
STEP5 PUT THE CHAIR UPRIGHT AND MAKE SURE ALL
LEGS ARE LEVEL, THEN FIRMLY TIGHTEN BOLTS WITH
ALLEN KEY WHILE THE CHAIR IS UPRIGHT AS
PICTURED ABOVE
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any partismissing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen key
STEP1 OPEN THE ZIPPER ON THE UNDERSIDE OFTHE
SEAT AND TAKE OUT LEGS AND HARDWARE STEP2 PUT THE WASHERS ON THE SCREW IN
THE ORDER SHOWN IN THE PICTURE
STEP3 INSERT THE LEGS AND SCREW IN THE SCREWS BUT DON'T
TIGHTEN COMPLETELY.REPEAT THE SAME STEPS FOR THE OTHER
THREE LEGS. CLOSE THE ZIPPER ON THE UNDERSIDE OF THE SEAT.
HW2 HW1 HW3
PREARATION
A
B B
C C