Safavieh Lighting Dagen User manual

WARNING
This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of electric shock. this
plug will fit in a polarized outlet only one way. if the plug does not fit fully in the outlet, reverse the plug, if it still does not fit, contact a
qualified electrician. Never use with an extension cord unless the plug can be fully inserted. do not attempt to defeat this safety
feature.
CARE AND MAINTENANCE
Mode
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate vacuum-brush
attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to the material. Avoid the use
of chemicals and household cleaners as they may damage the finish.
Model# FLL4073A
Product Dimensions: 23.5"LX9.75"WX62"H
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use
and installation
* The external flexible cable or cord of this luminaire cannot be replaced
* If the cord is damaged, the luminaire shall be destroyed
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY
A Lamp base 1X G Rotary connector 1X
B Lamp Body 1X H Steel Tube 3 1X
C Steel Tube 1 1X ISteel shade 1X
D Socket 1X J Out ring 1X
E Tube Cup 1X KBulb 1X
F Steel Tube 2 1X
1/2

PREPARATION
* Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
* If any part is missing or damaged, do not attempt to assemble the product.
* Estimated Assembly Time: 6 minutes.
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email [email protected]
NOTE: PLEASE USE ON/OFF TYPE"A" BULB MAX 40-WATT OR CFL BULB MAX 13-WATT OR LED BULB MAX 9-WATTTHERE IS LED 4-WATT BULB IN THE BOX
Step1: Make sure all parts could be aligned before
assemble. Unpack all parts from cartons carefully.Check
and make sure all parts are present.Insert the Lamp
Body(B1) into the Lamp Base(A ).
Insert the Lamp Body(B2) into the Lamp Body (B1 ). Insert
the Lamp Body(B3) into the Lamp Body (B2 ).Insert the
steel tube 1(C) into the Lamp Body (B3 ).
Insert the steel tube 2(F) and the steel tube 3(H) into
Rotary connector (G ).
Step2: Put the shade(I) on the Socket(D).Then tighten J(Out
ring)on theSocket(D).Insert the bulb(H) into the socket(D).
Step3: Put the light on a level surface to check if
everything is stable.
2/2