Safavieh FOX9065A User manual

PIECE QUANTITY
A1X
B2X
C4X
HW1 10X
HW2 1X
DESCRIPTION
PICTURE
FOX9065A
DIMENSIONS: 31.10"L x 19.69"W x 29.92"H
CARE AND MAINTENANCE
For cleaning of the frame, use a mild,soapy water, then dry the surface immediately with a
clean,soft cloth.For glass,dust with a soft,dry cloth.Do not use abrasive cleaner.
To use of washing powder or any other substances containing abrasives may scratch the glass.
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during
assembly
Stainless Steel Frame
Clear Glass Top
Part List and Hardware List
Wheel with Screws 10*0.5*15mm
Wrench
WEIGHT CAPACITY: 200 LBS
WARNING: DO NOT STAND ON BAR CART
WARNING: DO NOT OVER TORQUE BOLTS/SCREWS
The wheels and hardware is hang on the Frame
Suction Cup

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Wrench
STEP4 CAREFULLY PLACE THE CLEAR GLASS TOP(B) ONTO
THE STAINLESS STEEL FRAME(A)
STEP5 CHECK FOR STABILITY. ENSURE ALL WHEELS ARE
FULLY LOCKED AND SECURED INTO POSITION. YOUR BAR CART
IS NOW READY FOR USE
The wheels and hardware is hang on the Frame
STEP1 PUT STAINLESS STEEL FRAME(A) FACE DOWN AS
PICTURE ON A CLEAN, NON-MARRING SURFACE
STEP2 INSTALL THE WHEELS(C) INTO THE STAINLESS STEEL
FRAME(A), TURNING ANTICLOCKWISE,TIGHTEN BY USING
WRENCH
STEP3 TURN THE BAR CART RIGHT SIDE UP,INSERT THE
BACK OF SUCTION CUP INTO THE EIGHT MOUNTING
POSITIONS ON THE STAINLESS STEEL FRAME(A)
1
2
3
4
5
6
7
8