Safavieh PAT7043 User manual

NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
Model# PAT7043
Product Dimensions:25.2" W x 26.4" D x 50" H
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when not in use.
Remove wooden furniture from standing water. Dust regularly with small brush or vacuum
Spills should be taken care of immediately before they harden or
stain with a slightly dampened sponge.
Part List and Hardware List
A
B
C
D
E
F
G
Leg frame - 2
Leg frame - 1
Leg support
Seat frame
Back frame
1X
1X
1X
1X
2X
10X
1X
2X
PIECE DESCRIPTION PICTURE QUANTITY
HAllen key 5 mm
M6x80
M6x60
Screw
Screw

Attach leg frame (C),(D) to seat frame (B), back frame(A)
and Leg support (E) by using screw(G),(F), tighten with allen key(H)
Attach seat frame (B) to back frame(A)
by using screw(G), tighten with allen key(H)
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 30 minutes.
Tools Required for Assembly (included): Allen Key
12
Step 1 Step 2
G
G
G
G
G
G
G
G
G
F
C
A
D
B
B
E
E
F
G
A

NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
Model# PAT7043
Product Dimensions:27.6" W x 27.6" D x 39.4" H
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when not in use.
Remove wooden furniture from standing water. Dust regularly with small brush or vacuum
Spills should be taken care of immediately before they harden or
stain with a slightly dampened sponge.
Part List and Hardware List
A
B
C
D
E
F
G
Leg
Top supprot frame
Bottom frame
Top table
1X
1X
1X
4X
4X
1X
8X
PIECE DESCRIPTION PICTURE QUANTITY
Allen key 5 mm
M7x70
M7x30
Screw
Screw

Attach top support frame (B) and bottom
frame (C) to leg (D), by using screw(E),
tighten with allen key(G)
Attach leg frame to top table (A),
by using screw(F), tighten with allen key(G)
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 30 minutes.
Tools Required for Assembly (included): Allen Key
12
Step 1
3
Step 2
Adjust the legs high or low as shown
Step 3
A
D
DD
D
F
F
C
B
EE
E
E