Safavieh COUTURE SFV4700 User manual

CARE AND MAINTENANCE
NOTICE
E Metal Gasket(M8) 12X
B FROUNT LEG 2X
DSpring washer(M8) 12X
C BACK LEG 2X
Part List and Hardware List
PIECE DESCRIPTION PICTURE
QUANTITY
SAFAVIEH
The legs and hardware are located underneath the
chair in the zipper compartment
FBolt(M8*35mm) 12X
GAllen key 1X
A SEAT 1X
Spot clean using a mild water-free solvent. Only a professional cleaner should
undertake a complete overall cleaning.
The use of steam or water-based cleaners may cause excessive shrinking or
staining.
* Please make sure that you have all parts indicated before you begin assembly of
this item
* This item should be assembled on a soft surface to prevent scratching the finish
during assembly
*This item may require periodic tightening SFV4700
Dimensions:32.09"WX30.31"DX31.5"H
C O U T U R E
Weight Capacity: 275 lbs
WARNING: DO NOT STAND ON CHAIR
WARNING: DO NOT OVER TORQUE BOLTS/SCREWS

PREPARATION
The legs and hardware are located underneath the chair in the
zipper compartment.
STEP5 PUT THE CHAIR UPRIGHT AND MAKE SURE ALL
LEGS ARE LEVEL, THEN FIRMLY TIGHTEN BOLTS WITH
ALLEN KEY WHILE THE CHAIR IS UPRIGHT AS
PICTURED ABOVE(IF THE CHAIR WOBBLY, YOU CAN
EASY ADJUST LEG BOTTOM PLASTIC SCREW)
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents
list and hardware contents list.
If any partismissing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen key
STEP1 OPEN THE ZIPPER ON THE UNDERSIDE OF THE
SEAT AND TAKE OUT LEGS AND HARDWARE STEP2 PUT THE WASHERS ON THE BOLT IN THE ORDER SHOWN IN THE PICTURE
STEP3 INSERT THE LEGS AND SCREW IN THE BOLTS
BUT DON'T TIGHTEN COMPLETELY.REPEAT THE
SAME STEPS FOR THE OTHER THREE LEGS
STEP4 CLOSE THE ZIPPER ON THE UNDERSIDE OFTHE
SEAT.
E D F
A
C
C
B
B
D
G
C
E
F