Safavieh SFV4759 User manual

CARE AND MAINTENANCE
NOTICE
B
C
SAFAVIEH
ASeat 1X
Spot clean using a mild water-free solvent. Only a professional cleaner should
undertake a complete overall cleaning.
The use of steam or water-based cleaners may cause excessive shrinking or staining.
staining.
* Please make sure that you have all parts indicated before you begin assembly of
this item
* This item should be assembled on a soft surface to prevent scratching the finish
during assembly
* This item may require periodic tightening
C O U T U R E
D
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY
CARE AND MAINTENANCE
HW1
HW2
HW3
Left arm
Right arm
Leg
HW4
Socket Screws 8 *1.25*65MM
Split Lock Washer(M8)
Flat Washer(M8)
WARNING: DO NOT STAND ON BENCH
WARNING: DO NOT OVER TORQUE WASHER/SCREWS
18X
1X
18X
4X
1X
Allen Key 1X
18X
SFV4759
Dimensions:86.81"*37.60"*27.17"
Weight Capacity: 825 lbs
The two arms ,Legs and hardware are located at the bottom of the Bench.

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
PREPARATION
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen key
D
B
D
STEP2 PUT THE WASHERS ON THE SCREW IN
THE ORDER SHOWN IN THE PICTURE
STEP1 OPEN THE ZIPPER ON THE UNDERSIDE OF
THE SEAT AND TAKE OUT LEGS, ARMS AND
HARDWARE.
BAC
A
C
D
D
STEP5 FINISHED.
HW2 HW1 HW3 HW4
STEP3 CONNECT THE LEFT ARM AND RIGHT ARM
BY SCREWS(AS STEP2 SHOWN) ,TIGHTEN THE
SCREWS BY WRENCH (HW4) AS SHOWN.
STEP4 INSERT THE LEGS AND SCREW (AS
STEP2 SHOWN) IN THE SCREWS ,TIGHTEN THE
SCREW BY WRENCH(HW4) AS SHOWN.
HW4
The two arms,Legs and hardware are located at the bottom of the Bench.