Safe Fleet Prime Design CSU-3100 User manual

CSU-3100
Page 2 Packaging Contents
Pages 3-4 Mounting to the Wheel Well
Prime Design Cantilever Shelving Support Base Assembly
PRIME DESIGN, A SAFE FLEET BRAND ▪ Address: 1689 Oakdale Avenue #102, West St Paul, Minnesota 55118
Toll Free: 1.8.PRIME.RACK ▪ Fax: [phone] ▪ Email: [email protected] ▪ Website: www.primedesign.net

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2021 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608, 10501022 AND OTHER PATENTS PENDING
2
CSU-3100 ASSEMBLY INSTRUCTIONS–PACKAGING CONTENTS
CSU-3100..................................................................(Qty 1)
Shelving Support Base (1X)
Mounting Feet (2X)
Base Connector (2X)
CONTENTS OVERVIEW

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2021 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608, 10501022 AND OTHER PATENTS PENDING
3
CSU-3100 ASSEMBLY INSTRUCTIONS–MOUNTING TO THE WHEEL WELL
MOUNTING SEQUENCE
Place Mounting feet and drill as required
for your conguration.
NOTE: Positioning of the Support Base will vary
according to customer vehicle layout. See OEM
for recommendations.
12Install hardware as required according to
your OEM. Hardware not included.

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2021 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608, 10501022 AND OTHER PATENTS PENDING
4
CSU-3100 ASSEMBLY INSTRUCTIONS–MOUNTING TO THE WHEEL WELL
USAM-CSU3100-US01 Rev-A 0121
4Torque to 90 in-lbs
Assemble as
shown below.
3