Safety Track UCIT BASIC 2 User manual
UCIT BASIC 2 CAMERA
Vehicle Video Recorder
Installation Manual
!
2015 JUN V 1.1
Table of Contents
A. Features………………………………………………………………. 1
B. Specifications………………………………………………………….2-3
C. Notices……………………………………………….…………………4
D. What’s in the Box/Tools Required……………………………………5
D. Structure of Product…………………………………………………..6-7
E. Dimensions …………………………………………………..………. 8
F. Installation Guide ………………………………………………..….. 9-11 !
!
A. Features
1. Suitable for all personal vehicles i.e taxi, bus, trucks etc.
2. Small size, easy installation and dismount, it does not affect !
the driver's line of sight.
3. Insert the SD card and power on to start recording without !
additional operating.
4. Simultaneously records interior and exterior condition.
5. Recordings are time and date stamped for easy review
6. Records driving condition, sound, G-Sensor and GPS !
data.
7. Front view angle approx. 120 degrees. Back view angle !
approx. 170 degrees.
8. Records track of driving routes which can be shown on !
Google Map when we playing the video.
9. Micro SD SanDisk memory card Class 10 or above required.
10. G-sensor sensitivity can be adjusted according to road !
situations. When a strong shock is detected, system will start
emergency recording and keep the files without being overwritten.
!
!
B. Specifications
Item / Specification
Chipset
H.264 image compression chip
Sensor Device:
Forward facing lens: 720p CMOS Sensor
Backward facing lens: VGA CMOS Sensor.
View Angle
Outside vehicle approx : 120 degrees
Inside vehicle approx : 170 degrees
Voltage
Use 5V±5%, 1.5A Cigarette lighter adapter. The machine needs 4.7v to start.
Operating Temp
-15°C~+55°C (Inside Vehicle).
Storage Device
Micro SD Card (16GB/32GB/64GB) Class 10 or above SD Card Required
Recording Frame
Forward facing lens: 1280x720; Highest resolution: 30fps/25fps (NTSC/PAL)
Backward facing lens: 640x480; Highest resolution: 15fps/15fps (NTSC/PAL)
Auto record when system is powered up; backward facing lens can be disabled by
settings in software menu.
Recording Content
Date, time, video, sound, G-sensor data, GPS data. "
Recording Format
Specific format for software player.
Microphone
Built-in high sensitivity single microphone for automatic voice adjustment.
Time Setup
Auto-calibrated by GPS signals. If GPS is not available, the built-in clock will be used.
G-Sensor
Internal 3D G-Sensor.
Out Device
. (a) TV-Out (1 Vp-p composite video output, 75 ohms), Video Output format:
NTSC / PAL alternative. !
. (b) Force Record Button: For emergency recording. Gleams in night time. !
. (c) Red light: Recording indicator. In emergency recording, it flashes more
frequently. !
. (d) Green light: Flashing: Searching GPS signals. Light on : GPS positioning
ready !
Note: When IR turns on, the LED light will be dimmer.
C. Notices
. (a) The GPS positioning speed will be influenced by solar film of the front
windshield, weather or other environment factors. !
. (b) Starting and closing time of infrared will be subject to light intensity, the
installation location, front windshield and other factors.!
. (c) Day and night mode has a delay for about 30 seconds. Night mode will be
priority when powered on. !
. (d) Memory card formatted by using the playback software. This may be done for
you already.!
. (e) System must be installed in an area that windshield wipers can reach to
ensure the clarity of the recorded video. !
. (f) Please do not plug the power in both micro-USB sockets. The system might
get damaged.
. (g) If you do not use the player to format memory card, the system will be forced
to format the entire memory card and then start recording. !
. (h) The machine itself has a distinction between NTSC or PAL. Video
output to the monitor with corresponding screen system. !
. (i) Please make sure the SD Card is unlocked (slider bar on side) before writing
or reviewing video data. Otherwise it will not work.!
. (j) Please make sure the SD Card is unlocked (slider bar on side) before writing
or reviewing video data. Otherwise it will not work.
D. What’s in the Box
!
Standard:
Camera System
Hardwire Kit (Battery Backup/Charge Guard)
SD card locking bracket (with screws and tool)
Cigarette lighter adapter (If requested)
Suction cup bracket with cups, Bracket holder and Adhesive mount option
Optional: (a) Micro SD card (16GB/32GB/64GB/128GB)
E. Tools Required:
•Power Drill
•Volt Meter
•Wire Crimpers
•Wire Strippers
•Electrical Tape
•Zip Ties
•Wire Connectors (Installer’s Choice ex.T-tap, ring connector, fuse taps)
•Extra wire (Shouldn’t need but just in case)
•Screwdrivers (flat head and philips)
•Self Tapping Screws
•3M Double Sided Trim Tape
•Auto trim removal tool
•Flashlight"
F. Structure of Product
1. Force Recording Button Recording Indicator
2. Recording Indicator
3. GPS Indicator
4. IVR LEDS
5. Light Sensor
6. Backward Facing Lens
Structure of Product (Continued on next page)
1
6
5
4
3
2
1. Forward Facing Lens 4. DC5V(1) Power cable Port (Cable Locked into place)
2. Video Out 5. Micro SD Slot
3. N/A Unused
*Please do not plug the power in both micro-USB terminals. The system can be
damaged! "
1
4
2
3
5
G. Dimensions
UNIT:mm
H. Installation Guide
Installation Guide continued on next page…
1. Make the bracket face upward.
2. Assemble the suction cups.
3. Set up the device in the proper
position.
4. Adjust the viewing angle.
*NOTE: If you have any issues or questions
in regards to installation don’t hesitate to contact
888-286-9829 and press 6 for Support
7. Wire Schematic:
White: Power
Black: Ground
Step 1: Hardwire to vehicle according
to schematic above. Attach power to
either Switch (ignition) or Constant.
Depending on how you want the
camera to operate.
Step 2: Use electrical tape to conceal
exposed wires once connected. Test
Ignition to insure proper connection.
Step 3: Conceal Charge Guard/Battery
Backup box and wires.
Install Micro SD Card by pushing in logo
side up until it clicks. (See user guide for
inserting and removing SD cards).
install security bracket with the two screws
using the tool provided. As shown above.
5
8. When the power is successfully
connected, the IVR LED will be lit for 10
seconds.
9. Force Record Button light is also on
when power is successfully connected.
10. Green light is GPS. This light will
flash when GPS is positioning, Light
will be on and solid when GPS is ready.
11. Red light is recording. Flashing
signifies recording, fast flashing
occurs in emergency mode or force
record.
12. Force Record Button: When
pressed, the red light (recording) will
flash rapidly. In night time situations
the Force record light will come on as
an indicator.
13. Installation Complete!
Table of contents
Other Safety Track Dashcam manuals
