Safety Tubs Extension Kit User manual

D
A
Step 1
B
- Refer to Figure # 1.
- Measure tub to Wall dimension
- Take Skirt (A) and Top Panel (B) and mark
dimension measured.
- Trace a line with a pencil and add tape along the
inside of the line
- Cut using a high speed blade from the acrylic side
of each piece to fit opening.
Figure # 1
Extension Kit
Assembly Instructions
Wall
dimension
Tub to wall
C
Part Number Description
ASkirt
BTop Panel
CSheet Metal Screw
DSelf tapping screws

Step 2
Extension Kit
Assembly Instructions2
- Once Skirt (A) and Top Panel (B) have been cut to desired size, Skirt (A) can be attached to the Tub by
using Sheet Metal Screw (C) provided through Skirt (A) pre drilled holes.
- Refer to Figure # 2.
D
Figure # 2
Step 3
- Following the same procedure Top Panel (B) can be attached using Self Tapping Screws (D) through
Top Panel (B) pre drilled holes.
- Refer to Figure # 3
A
Figure # 3
B
C

Figure # 4
Wood Stringers
- For finished unit refer to Figure # 5
Step 4
Extension Kit
Assembly Instructions 3
- In order to securely attach Skirt (A) and Top Panel (B) to the wall, wood stringers need to be added.
- Refer to Figure # 4
Step 5
Wall
Figure # 5
Apply silicone
while attaching
Skirt (A) and Top
Panel (B) to
Wood Stringers