Sage Living Home & Decor ARC BED User manual

SAGE LIVING HOME & DÉCOR PRIVATE LTD
ARC BED

SAGE LIVING HOME & DÉOR PVT LTD
* Do not dispose of any packaging or contents of the shipping carton until assembly is
completed to avoid any accidentally discarding small parts or hardware.
* For safety and ease of assembly, a minimum of 4 people is recommended for
installation.
* Keep the parts on a carpet/ bubble wrap/soft cloth while assembling to avoid scratches.
* Kindly keep any sharp surfaces or objects away from the assembly area such that they do not
scratch or damage the product.
* Assemble in a clean & dry area.
* Kindly use gloves while assembling.
PARTS INCLUDED:
No.
Item
Description
Qty
1
Allen Key M4
01
2
Allen Key M5
01
3
M6 Screw
51
4
M8 Screw
08
5
Headboard
01
6
Footboard
01
7
Side Rails
02
8
Center Support
01

SAGE LIVING HOME & DÉOR PVT LTD
No.
Item
Description
Qty
9
Slats
17
10
Legs
02
STEP: -1 Carefully unpack all the parts of the Arc bed from the carton. Keep the parts on
carpet/ cloth to avoid scratches.
STEP: -2 Attach the Side Rails, one by one, to the Headboard and the Footboard using M8
Screws, as shown in Fig. 01. Once all the screws are fixed and the parts are attached properly
tighten the screws using the Allen key M4.
Fig. 01

SAGE LIVING HOME & DÉOR PVT LTD
Fig. 02
STEP: -3 Take the Centre Support and attach the two Legs to the underneath side of the
Centre Support. Rotate the legs in the anti-clockwise direction to fix them. Place the
assembled legs inside the bed frame.
Fig. 03

SAGE LIVING HOME & DÉOR PVT LTD
Fig.-04
STEP: - 4 Place the first and the last Slats across the Side Rails and Centre Support and
make sure to align with the holes. Use the M6 Screw to fix the slat on the Centre Support and
the Side Rails (Fig.-05). This helps in fixing the Centre support in position. Now place all the
other slats and similarly fix them. Tighten all the screws with Allen Key M4.
Fig.-05

SAGE LIVING HOME & DÉOR PVT LTD
Fig.-06
STEP:-5 Arc Bed is ready to use.
Fig.-06