wi-fi button press and hold for 3
seconds to turn wi-fi on/o
wi-fi pairing button press to
activate pairing using WPS
(wi-fi protected setup)
connecting to your wi-fi router
Connect using wi-fi: use the wi-fi
name and password on the back of
the router and the wi-fi reference card
to connect. Alternatively, scan the QR
code on the router and reference card
to connect your devices automatically.
Connect using Ethernet: you can
connect up to 4 devices via the yellow
LAN (Local Area Network) ports on the
back of the router.
Connect using wi-fi protected setup
(WPS): press the wi-fi pairing button to
activate WPS on the router. Then follow
the instructions for WPS setup on your
device. Note: ensure your device is in
the same room as your router when
attempting to pair using WPS.
Expert mode: you can manage your
router through a portal in your internet
browser. Enter https://192.168.1.1 in
your browser and use “admin” as the
username. Use the admin key found
on the back of the router as the
password. From here you can manage
your wi-fi name, password and device
access. Note: some of the settings
in your router portal can eect the
performance of your router. If in doubt
please check our website for more
details or contact customer services.
help and advice
To learn more about managing your broadband visit our
website at toob.co.uk
If you are having connection issues,
check that your router is connected
as per the setup instructions and
restart your router by pressing the
power button, waiting 30 seconds and
pressing the power again and waiting
for the router to boot up. Check the
connection with more than one device
to ensure the issue is with the router.
If you still need help then visit our
website at toob.co.uk .
Note: maximum wi-fi speeds are
dependent on a number of factors,
including device capability, router
placement, distance from router and
interference from other routers and
electrical devices. For more details on
how to get the best from your router
visit our website.
version 1
©toob ltd 2019
