Salamander Designs X-LARGE SINGLE DISPLAY MOUNT User manual

Salamander Designs, Single X-Large Display for 4 Bay Cabinets 501-726 [2.22]
X-LARGE SINGLE DISPLAY MOUNT
FOR 4 BAY CABINETS
Vesa Patterns
Horizontal: 400, 500, 600, 700, 800, 900, 1000, 1100, 1200
Vertical: 100, 200, 300, 400, 500, 600
X-LARGE SINGLE DISPLAY MOUNT HEIGHT/WEIGHT CAPACITY
56” - Low 63” - H1 69” - H2 74” - H3 79” - H4 Wall
Secured
Center of Vesa Range (A) 45” - 51” 52” - 58” 57” - 63” 63” - 69” 68” - 74” All
4-Bay M1XL 400lbs 400lbs 250lbs 250lbs 250lbs 400lbs

1. Install Display Interface Brackets
Fasten the display interface brackets using fasteners (length and size recommended by the display manufacturer).
Interface
Bracket
Display
Fasteners
Mounting Discs
Salamander Designs, Single X-Large Display for 4 Bay Cabinets 501-726 [2.22]

If desired, adjust the screen center height by removing the three 1/4-20 x 2” Button Head Socket Cap Screws
and loosening (Do Not Remove) the three 1/4-20 x 5/8” Button Head Socket Cap Screws and the 1/4-20 x 3/4”
Set Screws.
Lower the Display Header to the desired position and reattach the 2” screws through the Display Header and
Vertical Post to the Flat Nut.
2a. Adjust Screen Center Height
See “A”
in Table
1/4-20 x 5/8” BUTTON HEAD SCREW - Snug after tilt adjustment complete
1/4-20 x 3/4” SET SCREW - Used for tilt adjustment
1/4-20 x 2” BUTTON HEAD
SOCKET CAP SCREW (3X)
Display Header
Vertical Post (3X)
Header Tilt
Adjustment
To adjust tilt angle, if necessary, leave the 1/4-20 x 5/8” Button Head
Screws loose and adjust the Set Screws. Snug the 1/4-20 x 5/8” Button
Head Screws, but do not over tighten.
2b. Adjust Tilt Angle
Salamander Designs, Single X-Large Display for 4 Bay Cabinets 501-726 [2.22]

Refer to Tech Shelf or Speaker Bracket Accessory Instructions to install.
3. Attach Tech Shelf Or Speaker Bracket (Optional)
4. Mount Display On Keyhole Header
Carefully align display interface brackets onto the keyhole header.
Be sure all mounting discs are fully engaged.
LIMITED WARRANTY FOR COMMERCIAL PRODUCTS
Salamander is proud to stand behind our products with industry-leading warranties. Should you ever encounter any problem with your
Salamander product, let us know.We are here to make it right. 1.800.535.5659 - 860.761.9500
Full warranty including limitations and warranty claim information may be found at www.salamanderdesigns.com/commercial/warranty
Salamander Designs, Single X-Large Display for 4 Bay Cabinets 501-726 [2.22]