Samjung PLTDVCR600 User manual

MODEL NO.: PLTDVCR600,PLDVCR500/2002.10.01
User's Manual
◆
In the initial settings, exclusive channel for DVD/Video is set to CH 3.
Set the TV channel to CH3 before using it.
◆ Region code of DVD/Video player for home is 1 or ALL.
In inserting a disc with other region code, it does not operate.
Please only use a disc with region code 1 or ALL.
◆
is a 'Prohibition' mark. If this mark is displayed in operating the product,
please wait for a while, then use it. If 'Prohibition' mark continues to be displayed
in pressing a button after that, it means the button does not
function in the currently played disc.

1
MODEL NO.: PLTDVCR600,PLDVCR500/2002.10.01
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). NO USER-
SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to alert the user
to the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral
triangle is intended to alert the user to the presence
of important operating and servicing instructions in
the literature accompanying the appliance.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
WARNING :
CAUTION :
IMPORTANT FOR LASER PRODUCTS
LASER : This Digital Video Disc Player employs a Laser System. To ensure proper use of this product
please read this owner’s manual carefully and retain for future reference. Should the unit require
maintenance, contact an authorized service location - see service procedure.
Use of control adjustments or the performance of procedures other than those specified may
result in hazardous radiation exposure.
To prevent direct exposure to the laser beam, do not try to open the enclosure. Visible laser
radiation when open and interlocks defeated.
DO NOT STARE INTO THE BEAM.
DANGER : Visible laser radiation when open and interlock failed or defeated.
Avoid direct exposure to beam.
CAUTION : Do not open the top cover. There are no user serviceable parts
inside the Unit; leave all servicing to qualified service personnel.
FCC NOTICE:This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rule. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception; which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experience radio/TV technical for help.
CAUTION: Any changes or modification in construction of this device which are not expressly
approved by the party responsible for compliance could void the user’s authority to operate
the equipment.
Important Safeguards
Important Safeguards

2
MODEL NO.: PLTDVCR600,PLDVCR500/2002.10.01
This set has been designed and manufactured to assure personal safety. Improper use can result in electric
shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following
procedures for installation, use and servicing. This unit is fully transistorized and does not contain any parts
that can be repaired by the user.
1 READ INSTRUCTIONS
All the safety and operating instructions should be read before the unit is operated.
2 RETAIN INSTRUCTIONS
The safety and operating instructions should be retained for future reference.
3 HEED WARNINGS
All warnings on the unit and in the operating instructions should be adhered to.
4 FOLLOW INSTRUCTIONS
All operating and use instructions should be followed.
5 CLEANING
Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use
a damp cloth for cleaning.
6 ATTACHMENTS
Do not use attachments unless recommended by the unit’s manufacturer as they may cause hazards.
7 WATER AND MOISTURE
Do not use this unit near water- for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet
basement, or near a swimming pool and the like. Caution : Maintain electrical safety. Powerline operated
equipment or accessories connected to this unit should bear the UL listing mark or CSA certification mark on the
accessory itself and should not be modified so as to defeat the safety features. This will help avoid any potential
hazard from electrical shock or fire. If in doubt, contact qualified service personnel.
8 ACCESSORIES
Do not place this unit on an unstable cart, stand, tripod, bracket, or table. The
unit may fall, causing serious injury to a child or adult as well as serious
damage to the unit. Use this unit only with a cart, stand , tripod, bracket, or
table recommended by the manufacturer.
8-A
A unit and cart combination should be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the unit and cart combination
to overturn.
9 VENTILATION
Slots and openings in the case are provided for ventilation to ensure reliable operation of the unit and to
protect it from overheating. These openings must not be blocked or covered. These openings must not be
blocked by placing the unit on a bed, sofa, rug, or other similar surface. This unit should never be placed
near or over a radiator or heat radiator. This unit should not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been
adhered to.
10 POWER SOURCES
This unit should be operated only from the type of power source indicated on the marking label. If you are
not sure of the type of power supply to your home, consult your dealer or local power company. For units
intended to operate from battery power, or other sources, refer to the operating instructions.
PORTABLE CART WARNING
(symbol provided by RETAC)
11 GROUNDING OR POLARIZATION
This unit is equipped with a polarized alternating -current line plug (a plug having one blade wider than the other).
This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug
fully into the outlet, try reversing the plug. If the plug still fails to fit, contact your electrician to replace your obsolete
outlet.To prevent electric shock, do not use this polarized plug with an extension cord, receptacle, or other outlet
unless the blades can be fully inserted without blade exposure. If you need an extension cord, use a polarized
cord.
Important Safeguards

3
MODEL NO.: PLTDVCR600,PLDVCR500/2002.10.01
12 POWER-CORD PROTECTION
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon
or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they
exit from the unit.
Note to CATV system installer
This reminder is provided to call the CATV system installer’s attention to Section 820-40 of the NEC which
provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to
the grounding system of the building, as close to the point of cable entry as practical.
13 OUTDOOR ANTENNA GROUNDING
If an outside antenna or cable system is connected to the product, be
sure the antenna or cable system is grounded so as to provide some
protection against voltage surges and built-up static charges. Section
810 of the National Electrical Code, ANSI/NFPA No. 70-1984
(Section 54 of Canadian Electrical Code, Part 1) provides information
with respect to proper grounding of the mast and supporting
structure, grounding of the lead-in wire to an antenna-discharge unit,
connection to grounding electrodes, and requirements for the
grounding electrode. See example as shown.
14 POWER LINE
An outside antenna system should not be located in the vicinity of overhead power lines, other electric light or
power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching or approaching such power lines or circuits as contact with
them might be fatal. Installing an outdoor antenna can be hazardous and should be left to a professional antenna
installer.
15 LIGHTNING
For added protection for this unit during a lightning storm, or when it is left unattended and unused for long periods
of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to
the unit due to lightning and power line surges.
16 DISC TRAY
Keep your fingers well clear of the disc as it is closing. It may cause serious personal injury.
17 OVERLOADING
Do not overload wall outlets of extension cords as this can result in a risk of fire or electric shock.
18 OBJECT AND LIQUID ENTRY
Never push objects of any kind into this unit through openings as they may touch dangerous voltage points or
“short-out”parts that could result in a fire or electric shock. Never spill liquid of any kind on the unit.
19 BURDEN
Do not place a heavy object on or step on the product. The object may fall, causing serious personal injury and
serious damage to the product.
20 DISC
Do not use a cracked, deformed or repaired disc. These discs are easily broken and may cause serious personal
injury and product malfunction.
21 SERVICING
Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service personnel.
ANTENNA DISCHARGE UNIT
(NEC SECTION 810-20)
ANTENNA LEAD
IN WIRE
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250 PART H)
GROUND CLAMP
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
EXAMPLE OF ANTENNA
GROUNDING
NEC - NATIONAL ELECTRICAL CODE
Important Safeguards

4
MODEL NO.: PLTDVCR600,PLDVCR500/2002.10.01
Read Carefully before Using
Cautions in use of DVD-Video player are described below. Please read carefully before using a DVD-Video player.
◈ Installation place and handling
- When you place this player near other devices, they may affect poorly together.
- When you place DVD-Video player and TV in the upper and lower sides, it may cause flickering of pictures
or failure (tape is not ejected).
- When you place this player near strong magnetic materials, it may affect image or voice poorly or damage
recording.
- Do not spill volatile liquids like insect spray over the player. Do not leave rubber or plastic products in contact
with the player for a long time. They will cause deterioration or paint peel-off.
◈ Not in use
- When the unit is not in use, be sure to remove the disc or tape and turn off the power.
- If you do not use the unit for a long period, remove batteries in REMOTE to prevent leakage.
- In case you don’t use the unit for a long time, the unit may not function properly in the future. Turn on and
use the player occasionally.
Important Safeguards
22 DAMAGE REQUIRING SERVICE
Unplug this unit from the wall outlet and refer servicing to qualified service personnel under the following
conditions.
A. When the power-supply cord or plug is damaged.
B. If liquid has been spilled, or objects have fallen into the unit.
C. If the unit has been exposed to rain or water.
D. If the unit does not operate normally by following the operating instructions. Adjust only those
controls that are covered by the operating instructions. Improper adjustment of other controls may
result in damage and will often require extensive work by a qualified technician to restore the unit to
its normal operation.
E. If the unit has been dropped or the cabinet has been damaged.
F. When the unit exhibits a distinct change in performance-this indicates a need for service.
23 REPLACEMENT PARTS
When replacement parts are required, have the service technician verify that the replacements he uses
have the same safety characteristics as the original parts. Use of replacements specified by the unit
manufacturer can prevent fire, electric shock, or other hazards.
24 SAFETY CHECK
Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks
recommended by the manufacturer to determine that the unit is in safe operating condition.
25 WALL OR CEILING MOUNTING
The product should be mounted to a wall or ceiling only as recommended by the manufacturer.
26 HEAT
The product should be situated away from heat sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.

5
MODEL NO.: PLTDVCR600,PLDVCR500/2002.10.01
◈ Moving
- Repack the unit as it was originally packed at the factory. Alternatively, pack this product with towel not to be
damaged.
- Eject any video tape.
◈ Cleaning
- Dust off dirt in cabinet or control panel part smoothly with a soft cloth.
- For heavy dirt, soak the cloth in a weak detergent solution, wring it well and wipe. Use a dry cloth to wipe it
out.
- Follow instructions in using chemical cleaners.
- Do not use any type of solvent such as gasoline or benzene, as they may cause deterioration or paint peel-off.
◈ Checking
- Video is a high precision device. To obtain a clear screen, we recommend regular inspection and
maintenance every 1,000 hours of use by technical engineers.
- For checking, contact your dealer or your nearest service center.
◈ Checking and Replacement of Antenna
- Antenna is subject to change in its direction or damage by wind and rain. For clean screen, contact and
consult your nearest service center about checking and replacement.
◈ In recording important screen
- Be sure to record the screen and check whether recording is performed properly. We beg you to understand
compensation of recording if recording is not performed by badness of used tape or video.
◈ Copyright
- Do not use your recordings without permission of a copyrighter except personal usage.
◈ Tape and Disc Handling
- Do not use any tape and disc below. Damage of video head or cut/coiling of tape may cause failure.
①Tape with mold
②Tape or disc stained with juice or attachments
③Tape having breakage connection
④Disassembled tape
⑤Disc with severe scratch
⑥Moisture condensation may occur in tape. Moisture condensation damages the tape. Please use the tape
after the moisture condensation is disappeared.
- After use, store tape vertically in a case to prevent loose.
- Do not store the following places.
①High temperature and humidity
②Subject generation of mold
③Subject to direct sunlight
④Much dirt or dust
⑤Near strong magnetic materials such as speaker
Important Safeguards

6
MODEL NO.: PLTDVCR600,PLDVCR500/2002.10.01
Important Safeguards
Read Carefully before Using
Advantages of This Product Are....
Idenificatuion of Controls
Front Panel
Rear Panel
Remote Controller
Connecting with TV
Connecting with Cable Box
Connecting with Other VCR or Camcorder
LANGUAGE SETUP MENU
Select DISC Menu Language
Select AUDIO Language
Select SUBTITLE Language
DISPLAY SETUP MENU
Set TV Display Mode
Set TV Type
Set Picture Mode
AUDIO SETUP MENU
Digital Out Setup
Dual Mono(1+1) Setup
Dynamic Range Compression Setup
PARENTAL LOCK SETUP MENU
Setup Parental Lock
Change the Password
OTHERS SETUP MENU
Screen Saver
VCR SETUP MENU
VCR OSD (One Screen Display)
VCR Auto Play
VCR Auto Repeat
OPERATING TV TUNER
TV Channel Set
CATV Channel Set
1
4
7
8
8
10
11
13
14
15
16
16
16
17
18
18
18
19
20
20
20
21
22
22
22
23
23
24
24
24
25
26
26
26
Contents
OTHER'S OPERATION
Using a zoom function
Angle
To Play It Skip
To Play It Fast
To Play It Slow
Repeating a Defined Period
Confirming The Current Disc Mode
To Display Menus In a Disc
Repeating a defined period (DVD)
A/V Select
Randum Play
Track Setting Up Play
ABOUT VCR
Video Head Cleaning
Erasure Protection
What is Dew Condensation Symption
ABOUT DVD
Playable Disc
Handling Disc
Cleaning Disc
Terms Related With DVD
BEFORE DOUBTING ABOUT TROUBLES (DVD)
BEFORE DOUBTING ABOUT TROUBLES (VCR)
SPECIFICATIONS
VCR Part
DVD Part
27
27
27
28
28
28
29
29
30
31
31
31
31
32
32
32
32
33
33
33
33
34
35
36
38
38
39
Contents

7
MODEL NO.: PLTDVCR600,PLDVCR500/2002.10.01
Advantages of This Product Are .....
◈Built-In TV Tuner (TV/CATV) _Option
◈Hi-Fi stereo system [VCR]
◈Digital Auto Tracking [VCR]
◈Back Lighting of Function Buttons
◈External Ir Remote Controller With Receiver
◈Dew & Heat Sensor For Tape Protectuon(VCR)
◈Auto Start Function
◈DC power Supply (2 kind of DC 12V inputs)
◈DVD, VCD, CD, CD-R(MP3), CD-RW, VHS playback function
◈Watching DVD for recording broadcast
◈Integrated Remote (VCR, DVD)
◈MP3 file playback function (CD-R disc having records of MP3 files)
◈Various video type-supported ( NTSC and PAL)◈GUI (Graphical User Interface) OSD (On Screen Display)
◈Screensaver function [DVD]
◈Slow Forward / reverse (DVD) playback
◈Fast Forward / reverse playback
◈Various TV aspect (DVD)
- 4:3 for Pan Scan, 4:3 for Letter Box, and 16:9 for Wide
◈Repeat playback (title and chapter for DVD, track and disc for VCD/CD)
◈ Screen zoom function (DVD/VCD)
◈Parental Lock function (DVD)
- This function can prevent playback of software that may be unsuitable for children.
◈ Multi Angle function (DVD)
- This function allows you to choose the viewing angle of scenes which were shot from a number
of different angles, It Depends on the Disc (The number of angles depends on the Disc?)
◈Multi Subtitle function (DVD)
- The subtitle can be seen in up to 32 languages. In the case of SVCD or CVD, it depends on the disc. (The
number of subtitle languages depends on the Disc?)
◈Multi Audio function (DVD)
- The audio soundtrack can be heard in up to 8 languages. In the case of SVCD or CVD,
it depends on the disc.(The number of audio languages depends on the Disc?)
◈ Composite video out
Advantages of This Product Are

8
MODEL NO.: PLTDVCR600,PLDVCR500/2002.10.01
Front Panel
⑫
⑭
⑮
⑬
Identification of Controls
①
Open/Close Button (DVD)
If this button is pressed while power is supplying .
disc tray will open,the open/close button lamp will
light up in red then insert the disc and
the disc will be played automatically
Playback/Pause Button(DVD)
③
④
②
Playback disc press this button to pause a screen
the pause lamp will blink in pause mode
Stop Button(DVD)
Use to stop playing
Disc Tray
⑥
⑦
⑧
⑨
⑩
⑪
⑤
DVD Disc Lamp
VCD Disc Lamp
CD/MP3 Disc Lamp
Press to select the next track or to
playback back rapidly when the disc is to playback
back rapidly, the fast forward button will light up in red
Fast Rewind Button
/ The Former Track Select Button (DVD)
Press to select the former track or to
playback rapidly when the disc is to playback
rapidly, the fast rewind button
will light up in red
Fast Forward Button
/ The Next Track Select Button (DVD)
Audio/Video in (AUX1)
Connect these jack to the audio/video out jacks
terminal of your game machine or camcorder using
the RCA cord provided.
Remote Control Receiver.
Autorepeat Lamp (VCR)
During auto repeat operation,
auto repeat lamp will light up in red.
HI-FI Lamp (VCR)
In the Hi-Fi out mode, the lamp will light up in red
DEW/HEAT Lamp (VCR)
When power is on, tis indicator flashes red to
indicate excessive moisture buildup inside the VCR.
The unit will not operate unit it dries out sufficiently
(the tape can be ejected from the unit)
When DEW mode has been activated,
leave the unit on the allow it to dry out completely.
REC Button (VCR)
Press the REC Button for at least one second to
start recording.
Fast forward/Cue key
If this button is pressed in the Playback mode,
the VCR enters the forward picture search mode.
If pressed in stop mode,the the tape will fast
forward at high speed. The FF indicator lamp will
up in red.
Identification of Controls
OPEN/CLOSE
①
②④⑤
⑥
⑦⑧⑨
⑩
⑪
⑫
⑬
⑭
⑮
③
Identification of Controls

9
MODEL NO.: PLTDVCR600,PLDVCR500/2002.10.01
Play Button.
Press this button to playback a recorded tape,
or to release special operation such as the search mode.
In the playback mode the playback indicator lamp will
be light in red, and Auto Tracking mode,
this indicator lamp will blink.
Cassette-In Lamp.
When the cassette is inserted,
the CST-IN lamp will light up in green.
Eject Button.
Press this button to eject tape.
If this button is pressed in the PLAYBACK mode,
the VCR enters the reverse picture search mode.
If pressed in STOP mode,
then the tape will rewind at high speed.
The REW indicator lamp will up in red.
Rewind / Review Button.
Stop Button.
Press this button to stop tape.
Power Button.
Cassette Compartment
When power is supplied to the set,
the power indicator lamp will always light up
in red. The Power ON and Power OFF mode
will be toggled by pressing this button.
When the POWER is switched on,
the power lamp will light up in red the other
buttons will light up in green.
Identification of Controls

10
MODEL NO.: PLTDVCR600,PLDVCR500/2002.10.01
Connect the TV antenna
(or cable if available- home use) to this
connector.
RF OUT Connector._option
This connectors provides an interface
to the antenna input connectors terminal of your
television using a coaxial cable.
Tuner the television to channel 3 or 4
to watch video tapes.
ANT .IN Connector._option
①
②
③
DC 12V IN JACK ( Round Type)
To use this connector, below Convert-Adapter
accessory should be locked into above connector 4.
( Convert-Adapter)
◈ Please note :
We highly recommend to connect the unit
corresponding to the 3-wire system of 4.
Thus, to make sure a proper working
of power-off tape guide.
Beyond it, the unit will automatically change
to standby mode after turning off the vehicle in
order to save the car battery.
( Ripple Voltage: Max 500mV) VIDEO OUT Connector.
Connect this terminal to AUDIO/VIDEO IN terminal of your TV
, using the RCA cord .
Connect this terminal to AUDIO/VIDEO IN terminal of your TV
, using the RCA cord .
IR INPUT
Connect this terminal to remote out.
DIGITAL AUDIO OUT Connecter
S/W OUT Connector
⑤
⑥
⑦
⑧
⑨
⑩
DVD OUT Connector.
AUDIO/VIDEO IN (AV2)_option
Connector this terminal to A/V OUT terminal of your
Game machine, Camcorder, using the RCA cord
For displaying this Rear A/V input connected, Input
Signal should be set to "AV2" in A/V select mode, using
the "A/V Sel" button
Connect this terminal to AUDIO/VIDEO IN terminal of your TV
, using the RCA cord .
To enjoy sound quality of theater level in home,
connect this jack with amp or unit embedded with
digital audio decoder
DC JACK IN (DC 12V)
For car using, we recommend to use this connector
with 3-wire system.
* Connector description for 4
④
GND
ACC 12V
VEHICLE BATTERY 12V
Identification of Controls
Rear Panel
①
③
④
⑥
⑦
⑧
⑨
②
⑤⑩

11
MODEL NO.: PLTDVCR600,PLDVCR500/2002.10.01
Remote Controller
1
3
2
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
DVD & VCR Power On/Off
REPEAT Playback button [DVD]
MENU button [DVD]
TITLE MENU button [DVD]
MOVE in OSD button [DVD]
A/V SEL button
OSD DISPLAY button [DVD]
RETURN button
CLEAR button [DVD]
PROGRAM button [DVD]
MUTE button
GOTO button [DVD]
PBC button [DVD]
FF button [DVD]
F.SKIP button [DVD]
CH3/CH4 button [VCR] _ option
EJECT button [VCR]
Auto Search button [VCR] _option
FF button [VCR]
STOP button [VCR]
AUDIO button [VCR]
REC button [VCR]
REPLAY button [VCR]
Tracking - (Manually Tracking in playback mode)
/Channel - (in TV or CATV mode)button [VCR] _option
Tracking + (Manually Tracking in playback mode)
/Channel + (in TV or CATV mode)button [VCR] _ option
Re -Tracking button [VCR]
Encore button [VCR]
Pause/Still button [VCR]
Playback button [VCR]
Rewind button [VCR]
TV /VCR button [VCR] _ option
STOP button [DVD]
R.SKIP button [DVD]
Play/Pause button [DVD]
Rewind button [DVD]
Step button [DVD]
Slow button [DVD]
Number button
Setup button
Enter button [DVD]
Zoom button [DVD]
Repeat A-B button [DVD]
Angle button [DVD]
Open/Close button [DVD]
Subtitle button [DVD]
Audio button [DVD]
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
OPEN/CLOSE
ANGLE SUBTITLE AUDIO REPEAT
REPEAT A-B ZOOM TOP MENU MENU
SETUP
PROGRAM
A/V SEL.
RETURN
CLEAR
MUTE
GOTO
PBC
STEP
SLOW
FFPLAY/PAUSEREW
F.SKIPSTOP
EJECTA. SEARCH
PLAYREW FFSTOP
ENCORE PAUSE/STILL
AUDIO
REPLAY
--- TRK ---
R.TRK REC
--- CH ---
R.SKIP
POWER
VCR
CH3/CH4
TV/VCR
ENTER
DISPLAY
123
456
78
0
9
+-
1
3
2
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45 46
Identification of Controls

12
MODEL NO.: PLTDVCR600,PLDVCR500/2002.10.01
Instructions in Using Remote
Accessories
Operate REMOTE within 7m
from the unit.
▶
▶
Do not press 2(two) buttons at
the same time.
▶
Do not light up sending part of
REMOTE
▶
Do not keep in the place with
much dust and humidity
▶
To purchase accessories or not supplied parts additionally, contact your nearest dealer or service center.
But, owner’s manual and warranty are not sold additionally.
OPEN/CLOSE
OPEN/CLOSE
ANGLE SUBTITLE AUDIO REPEAT
REPEATA-B ZOOM TOP MENU MENU
SETUP
PROGRAM
A/V SEL.
RETURN
CLEAR
MUTE
GOTO
PBC
STEP
SLOW
FFPLAY/PAUSEREW
F.SK IPSTOP
EJECTA.SEARCH
PLAYREW FFSTOP
ENCORE PAUSE/STILL
AUDIO
REPLAY
--- TRK ---
R.TRK REC
---CH ---
R.SKIP
POWER
VCR
CH3/CH4
TV/VCR
ENTER
DISPLAY
123
456
78
0
9
+-
OPEN/CLOSE
ANGLE SUBTITLE AUDIO REPEAT
REPEATA-B ZOOM TOP MENU MENU
SETUP
PROGRAM
A/V SEL.
RETURN
CLEAR
MUTE
GOTO
PBC
STEP
SLOW
FFPLAY/PAUSEREW
F.SK IPSTOP
EJECTA.SEARCH
PLAYREW FFSTOP
ENCORE PAUSE/STILL
AUDIO
REPLAY
--- TRK ---
R.TRK REC
--- CH ---
R.SKIP
POWER
VCR
CH3/CH4
TV/VCR
ENTER
DISPLAY
123
456
78
0
9
+-
OPEN/CLOSE
ANGLE SUBTITLE AUDIO REPEAT
REPEATA-B ZOOM TOP MENU MENU
SETUP
PROGRAM
A/V SEL.
RETURN
CLEAR
MUTE
GOTO
PBC
STEP
SLOW
FFPLAY/PAUSEREW
F.SK IPSTOP
EJECTA.SEARCH
PLAYREW FFSTOP
ENCORE PAUSE/STILL
AUDIO
REPLAY
--- TRK ---
R.TRK REC
--- CH ---
R.SKIP
POWER
VCR
CH3/CH4
TV/VCR
ENTER
DISPLAY
123
456
78
0
9
+-
REMOTE
2 Batteries
OPEN/CLOSE
ANGLESUBTITLEAUDIO REPEAT
REPEATA-BZOOMTOPMENUMENU
SETUP
PROGRAM
A/VSEL.
RETURN
CLEAR
MUTE
GOTO
PBC
STEP
SLOW
FF
PLAY/PAUSE
REW
F.SKIP
STOP
EJECT
A.SEARCH
PLAY
REWFF
STOP
ENCORE
PAUSE/STILL
AUDIO
REPLAY
---TRK---
R.TRKREC
---CH---
R.SKIP
POWER
VCR
CH3/CH4
TV/VCR
ENTER
DISPLAY
123
456
78
0
9
+-
Convert-Adapter
DC Power Cable
Owner's Manual
Waranty Card
Identification of Controls

13
MODEL NO.: PLTDVCR600,PLDVCR500/2002.10.01
INPUT 1
ANT IN
INPUT 2
REAR PANEL OF DVD-VIDEO
OUTSIDE ANTENNA OR
WALL ANTENNA OUTLET
REAR PANEL OF TV
RF CABLE
INPUT 1
ANT IN
INPUT 2
REAR PANEL OF TV
AUDIO/VIDEO CABLE
REAR PANEL OF DVD-VIDEO
Connecting with TV
How to Connect with RF cable
■ In the initial SET, exclusive channel for video is set to CH 3. To change this setting, set again in
“CHANNEL SET”screen in VCR operation.
■
In connecting RF cable to TV, set TV channel to CH3.
1. Remove circular cable (RF cable) (surplus cable) plugged in “ANT.IN”Jack in rear panel of TV. Connect the
cable to “ANT.IN”jack in rear panel of DVD-Video.
2. Connect TV to DVD-Video. Connect “RF OUT”jack in DVD-Video with “ANT.IN”jack in TV with RF cable.
3. (If there is AUDIO/VIDEO INPUT jack in TV)
Connect VIDEO OUT jack in DVD-Video to VIDEO IN jack in TV, and AUDIO OUT jack in DVD-Video to
AUDIO IN jack in TV with connecting cable of Audio/Video jack.
Select VCR mode by pressing TV/INPUT button in TV, you can view more clear screen and sound than
connection with RF cable only.
VHF: 2 ~13 channels of TV
UHF: 14~69 channels of TV
CATV: Broadcasting is transmitted with cable from broadcasting station by contract with the station and
consumers. It does not need any antenna.
In/Out jack in Audio/Video terminal:
- In: A jack used to receive signal required in this unit from other units.
- Out: A jack used to send signal of this unit to other units.
Connect with Audio/Video terminal, you can enjoy more clear video and audio.
(Use A/V Sel button in this REMOTE to select video mode.)
CHECK UP!
CHECK UP!
Connecting with TV

14
MODEL NO.: PLTDVCR600,PLDVCR500/2002.10.01
Connecting with Cable Box
How to connect
■
You should install a distributor additionally
.
If your cable system only requires you to use a converter box for some channels
(i.e., pay-TV channels), follow these steps: Find the primary incoming RF cable.
Plug this cable into a splitter (available at your local electronics store.)
Connect one RF cable between one OUT terminal on the splitter and the IN terminal on the converter box.
Connect another RF cable between the other OUT terminal on the splitter and the A-IN terminal
on an A/B switch available at your local electronics store.)Connect a third RF cable between
the OUT terminal on the converter box and the B-IN terminal on the A/B switch.
Connect a RF cable between the OUT terminal on the A/B switch and the ANT. IN on your DVD-VIDEO.
When the A/B switch is in the B position,use the converter box to change channels when the A/B switch is
in the A position, use the DVD-VIDEO to change channels.
How to watch general broadcasting with recording CATV
CHECK UP!
1. Set Channel Select switch of Converter Box to CH 3 or 4 as same as video
exclusive channel.
2. Press channel button of Converter Box to select channel to be recorded. In this case,
if you want to watch CATV to be recorded, press [TV/VCR] button of TV to select “VCR”.
3. Press [REC] button in DVD-Video.
4. To watch general broadcasting, press channel button in TV to select the desired channel.
For some types of TV, you should press [TV/VCR] button in TV REMOTE and convert from AV 1
( VCR 1) or AV2(VCR 2) mode to Broadcasting Channel mode to change TV channel.
Change channel selection of CATV receiver in recording, contents of recording is changed.
INPUT 1
IN
OUT ANT IN
INPUT 2
REAR PANEL OF DVD-VIDEO
CABLE ANTENNA
CONVERTER BOX REAR PANEL OF TV
SPLITTER (NOT SUPPORTED)
A/B Switch
RF CABLE
RF CABLE
RF CABLE
RF CABLE
OUT
OUT
IN
AUDIO/VIDEO CABLE
Connecting with Cable Box

15
MODEL NO.: PLTDVCR600,PLDVCR500/2002.10.01
Connecting with Other VCR or Camcorder
How to Connect with Jack in Front Panel
How to Connect with Jack in Rear Panel - Option
1. Connect AUDIO/VIDEO OUT jack in Camcorder(or playback video) to AUDIO/VIDEO IN jack
in front panel (or rear panel-option) of DVD-Video with connecting cable.
2. Connect “ANT. IN”jack in TV to “RF.OUT”jack in DVD-Video with RF cable.
3. To record contents of camcorder or playback other VCR, insert recording tape attached
recording tab in DVD-Video.
※ The AUX1 is only able to line recording
AUX1
How to Copy(Edit) Tape with Other VCR or Camcorder
1. Turn on DVD-Video.
2. Press A/V Sel button of remote control and select DVD-Video to display
"AUX 1" or "AUC 2" in TV screen.
3. Press [PLAY] button in Camcorder or playback other VCR.
4. Press [REC] button in DVD-Video if you want to record contents of camcorder or playback video.
5. Press [Pause] button in DVD-Video when unnecessary or undesired scene is displayed in recording.
(Caution) Recording is released automatically after 5 minutes since pressing [PAUSE] button.
Press [REC] button if you want to record again.
How to Playback Chapter Photographed by Camcorder
1. Turn DVD-Video on.
2. Press A/V Sel button of remote control and select DVD-Video to display “AUX 1”
or “AUX 2”in TV screen.
3. Insert tape in camcorder and playback it.
OPEN/CLOSE
OUT
VIDEO (L) AUDIO (R)
FRONT PANEL OF DVD-VIDEO
REAR PANEL OF PLAYBACK VCR(CAMCORDER)
INPUT 1
ANT IN
INPUT 2
REAR PANEL OF TV
AUDIO/VIDEO CABLE
REAR PANEL OF DVD-VIDEO
INPUT 1
OUT
VIDEO (L) AUDIO (R)
ANT IN
INPUT 2
REAR PANEL OF DVD-VIDEO
REAR PANEL OF PLAYBACK VCR(CAMCORDER)
REAR PANEL OF TV
AUDIO/VIDEO CABLE RF CABLE
AUX2
Connecting with Other VCR
or Camcorder

16
MODEL NO.: PLTDVCR600,PLDVCR500/2002.10.01
LANGUAGE SETUP MENU
Select DISC Menu Language
1. Press the "SETUP" button on the remote control.
The initial MENU is displayed.
3. Press the Right button
4. Press the Down ( or Up ) button unit for the
appropriate system is selected. and Press the
ENTER button to activate the selected.
( ENGLISH FRANCAIS DEUTSCH ESPANOL
ITALIANO)
2. Press the select(ENTER) button
then the LANGUAGE SETUP MENU is displayed.
to enter the selected menu.
5. Press the Down
4. Press the Right
unit for the appropriate system is selected. and
Press the ENTER button to activate the selected.
( or UP ) button
1. Press the "SETUP" button on the remote control.
The initial MENU is displayed.
2. Press the select(ENTER) button.
then the LANGUAGE SETUP menu is displayed.
button to select(ENTER) the
3. Press the Down
"AUDIO", then the AUDIO menu is displayed.
( ENGLISH FRANCAIS DEUTSCH ESPANOL
ITALIANO)
to enter the selected menu.
SETUPM MENU
VCR SETUP
LANGUAGE SETUP
DISPLAY SETUP
AUDIO SETUP
PARENTAL SETUP
OTHERS SETUP
LANGUAGE SETUP
T
T
?
EXIT SETUP
LANGUAGE SETUP MENU
DISC MENU
AUDIO
SUBTITLE
LANGUAGE SETUP
MAIN MENU
T
ENGLISH
FRANCAIS
DEUTSCH
ESPANOL
ITALIANO
LANGUAGE SETUP MENU
DISC MENU
AUDIO
SUBTITLE
LANGUAGE SETUP
MAIN MENU
T
ENGLISH
FRANCAIS
DEUTSCH
ESPANOL
ITALIANO
SETUPM MENU
VCR SETUP
LANGUAGE SETUP
DISPLAY SETUP
AUDIO SETUP
PARENTAL SETUP
OTHERS SETUP
LANGUAGE SETUP
T
T
?
EXIT SETUP
LANGUAGE SETUP MENU
DISC MENU
AUDIO
SUBTITLE
LANGUAGE SETUP
MAIN MENU
T
ENGLISH
FRANCAIS
DEUTSCH
ESPANOL
ITALIANO
LANGUAGE SETUP MENU
DISC MENU
AUDIO
SUBTITLE
LANGUAGE SETUP
MAIN MENU
T
ENGLISH
FRANCAIS
DEUTSCH
ESPANOL
ITALIANO
button.
LANGUAGE SETUP MENU
DISC MENU
AUDIO
SUBTITLE
LANGUAGE SETUP
MAIN MENU
T
ENGLISH
FRANCAIS
DEUTSCH
ESPANOL
ITALIANO
Select AUDIO Language
LANGUAGE SETUP MENU

MODEL NO.: PLTDVCR600,PLDVCR500/2002.10.01
Select SUBTITLE Language
1. Press the "SETUP" button on the remote control.
The initial MENU is displayed.
3. Press the Down ▼button to select (ENTER)
the "SUBTITLE".
Then the SUBTITLE menu is displayed.
4. Press the Right ▶button
to enter the selected menu.
5. Press the Down ▼( or Up ▲) button unit for the
appropriate system is selected.
and Press the ENTER button to activate the selected menu.
LANGUAGE SETUP MENU
DISC MENU
AUDIO
SUBTITLE
LANGUAGE SETUP
MAIN MENU
TENGLISH
FRANCAIS
DEUTSCH
ESPANOL
ITALIANO
OFF
2. Press the select(ENTER) button
then the "LANGUAGE SETUP" is displayed.
( ENGLISH FRANCAIS DEUTSCH ESPANOL
ITALIANO OFF )
SETUPM MENU
VCR SETUP
LANGUAGE SETUP
DISPLAY SETUP
AUDIO SETUP
PARENTAL SETUP
OTHERS SETUP
LANGUAGE SETUP
T
T
?
EXIT SETUP
LANGUAGE SETUP MENU
DISC MENU
AUDIO
SUBTITLE
LANGUAGE SETUP
MAIN MENU
T
ENGLISH
FRANCAIS
DEUTSCH
ESPANOL
ITALIANO
LANGUAGE SETUP MENU
DISC MENU
AUDIO
SUBTITLE
LANGUAGE SETUP
MAIN MENU
TENGLISH
FRANCAIS
DEUTSCH
ESPANOL
ITALIANO
OFF
LANGUAGE SETUP MENU
17

MODEL NO.: PLTDVCR600,PLDVCR500/2002.10.01
Set TV Display Mode
1. Press the "SETUP" button on the remote control.
The initial MENU is displayed.
3. Press the Right ▶button to enter
the selected menu.
4. Press the Down ▼( or Up ▲) button unit for the
appropriate system is selected. and Press the
ENTER button to activate the selected menu.
( 4:3 LETTER BOX →4:3 PAN-SCAN →16:9 WIDE )
DISPLAY SETUP MENU
2. Press the Down ▼button to select (ENTER)
the "DISPLAY SETUP".
Then the DISPLAY SETUP menu is displayed.
Set TV Type
1. Press the "SETUP" button on the remote control.
The initial MENU is displayd.
4. Press the Right ▶button to enter
the selected menu.
5. Press the Down ▼( or Up ▲) button unit for the
appropriate system is selected. and Press the
ENTER button to activate the selected menu
( MULTI →NTSC →PAL )
2. Press the Down ▼button to select (ENTER)
the "DISPLAY SETUP".
Then the DISPLAY SETUP menu is displayed.
3.Press the Down ▼button to select (ENTER)
the "TV TYPE".
SETUPM MENU
VCR SETUP
LANGUAGE SETUP
DISPLAY SETUP
AUDIO SETUP
PARENTAL SETUP
OTHERS SETUP
LANGUAGE SETUP
T
T
?
EXIT SETUP
SETUPM MENU
VCR SETUP
LANGUAGE SETUP
DISPLAY SETUP
AUDIO SETUP
PARENTAL SETUP
OTHERS SETUP
GOTO DISPLAY SETUP MENU
T
T
?
EXIT SETUP
SETUPM MENU
VCR SETUP
LANGUAGE SETUP
DISPLAY SETUP
AUDIO SETUP
PARENTAL SETUP
OTHERS SETUP
LANGUAGE SETUP
T
T
?
EXIT SETUP
SETUPM MENU
VCR SETUP
LANGUAGE SETUP
DISPLAY SETUP
AUDIO SETUP
PARENTAL SETUP
OTHERS SETUP
GOTO DISPLAY SETUP MENU
T
T
?
EXIT SETUP
DISPLAY SETUP MENU
TV DISPLAY
TV TYPE
PIC MODE
SET MULTISYNC MODE
MAIN MENU
MULTI
NTSC
PAL
DISPLAY SETUP MENU
TV DISPLAY
TV TYPE
PIC MODE
SELECT 4:3 NORMAL TV L-BOX
MAIN MENU
4:3 LETTER BOX
4:3 PAN-SCAN
16:9 WIDE
DISPLAY SETUP MENU
TV DISPLAY
TV TYPE
PIC MODE
SELECT NTSC TV
MAIN MENU
MULTI
NTSC
PAL
DISPLAY SETUP MENU
18

MODEL NO.: PLTDVCR600,PLDVCR500/2002.10.01
19
Set Picture Mode
1. Press the "SETUP" button on the remote control.
The initial MENU is displayed.
5. Press the Down ▼( or Up ▲) button unit for the
appropriate system is selected. and Press the
ENTER button to activate the selected menu.
( AUTO →HI-RES →N-FLICKER )
2. Press the Down ▼button to select (ENTER)
the "DISPLAY SETUP".
Then the DISPLAY SETUP menu is displayed.
3. Press the Down ▼button to select (ENTER)
the "PIC MODE".
4. Press the Right ▶button
to enter the selected menu.
SETUPM MENU
VCR SETUP
LANGUAGE SETUP
DISPLAY SETUP
AUDIO SETUP
PARENTAL SETUP
OTHERS SETUP
LANGUAGE SETUP
T
T
?
EXIT SETUP
SETUPM MENU
VCR SETUP
LANGUAGE SETUP
DISPLAY SETUP
AUDIO SETUP
PARENTAL SETUP
OTHERS SETUP
GOTO DISPLAY SETUP MENU
T
T
?
EXIT SETUP
DISPLAY SETUP MENU
TV DISPLAY
TV TYPE
PIC MODE
SET PICTURE MODE
MAIN MENU
AUTO
HI-RES
N-FLICKER
DISPLAY SETUP MENU
TV DISPLAY
TV TYPE
PIC MODE
SELECT HIGH-RESOLUTION MODE
MAIN MENU
AUTO
HI-RES
N-FLICKER
DISPLAY SETUP MENU