Samsara DM11 User manual

Door Monitor - DM11
INSTALL GUIDE
Questions? samsara.com/support
1× Sensor
(adhesive attached)
4× Screws 1× Magnet
What’s included:

2
3
1
Roll-Up Door
Discard magnet.
Secure with included adhesive. Screw if desired.
Place sensor on inside of door, as high as possible.
* Note: If using your own screws, make sure they’re non-magnetic.
Arrow Up
Swing Door
Secure with included adhesive. Screw if desired.
Place magnet on edge of door.
Place sensor on wall, arrow toward door.
Note: Max distance between sensor and magnet is ½ inch.
Light blinks when aligned.
Arrow
To Door
2
3
1