Samsung SCX-8040ND User manual

Annex B of ECMA-370 4th edition, June 2009 Page 1 (6)
Product environmental attributes – THE ECO DECLARATION
The declaration may be published only when all rows and/or fields marked with an *are filled-in (n.a. for not applicable).
Additional information regarding each item may be found under P14.
Brand *SAMSUNG Logo
Company name *SAMSUNG ELECTRONICS CO.LTD
Contact information *
416 Maetan 3, Yeongtong, Suwon, KOREA 443-742
www.samsung.com
Internet site *www.samsung.com
Additional information
The company declares (based on product specification or test results based obtained from sample testing), that the product
conforms to the statements given in this declaration.
Type of product *Multifunction product
Commercial name *MONO Laser Multifunction
Model number *SCX-8040ND
Issue date *2011-07-20
Intended market *Global Europe Asia, Pacific & Japan Americas Other
Additional information
This is an uncontrolled copy when in printed form. Please refer to the contact information for the latest version.
Quality Control Requirement met
Item Yes No
QC1 *The company enforces an internal quality control scheme to ensure the correctness of this eco declaration
QC2 *The company is a member of an eco declaration system that enforces regular independent quality control
such as organized by IT-Företagen (see www.itecodeclaration.org).

Annex B of ECMA-370 4th edition, June 2009 Page 2 (6)
Model number *SCX-8040ND
Issue date *2010-01-18 Logo
Product environmental attributes - Legal requirements Requirement met
Item Yes No n.a.
P1 Hazardous substances and preparations
P1.1*Products do not contain more than; 0.1% lead, 0.01% cadmium, 0.1% mercury, 0.1% hexavalent chromium,
0.1% polybrominated biphenyls (PBB) or 0.1% polybrominated diphenyl ethers (PBDE). (See legal
reference and Note B1)
P1.2*Products do not contain Asbestos (see legal reference).
Comment: Legal reference has no maximum concentration value.
P1.3*Products do not contain Ozone Depleting Substances: Chlorofluorocarbons (CFC),
hydrobromofluorocarbons (HBFC), hydrochlorofluorcarbons (HCFC), Halons, carbontetrachloride, 1,1,1-
trichloroethane, methyl bromide (see legal reference). Comment: Legal reference has no maximum
concentration values.
P1.4*Products do not contain more than; 0.005% polychlorinated biphenyl (PCB), 0.005% polychlorinated
terphenyl (PCT) in preparations (see legal reference).
P1.5* Products do not contain more than 0.1% short chain chloroparaffins (SCCP) with 10-13 carbon atoms in the
chain containing at least 48% per mass of chlorine in the SCCP (see legal reference).
P1.6*Textile and leather parts with direct skin contact do not contain Tri-(2,3,-dibromopropyl)-phosphate (TRIS),
Tris-(aziridinyl)-phosphineoxide (TEPA), polybrominated biphenyl (PBB) (see legal reference).
Comment: Legal reference has no maximum concentration values.
P1.7*Textile and leather parts with direct skin contact do not contain more than 0.003% Azo colorants that split
aromatic amines. (See legal reference and Note B1)
P1.8*Wooden parts do not contain arsenic and chromium as a wood preservation treatment as well as
pentachlorophenol and derivatives (see legal reference).
Comment: Legal reference has no maximum concentration values.
P1.9*Parts with direct and prolonged skin contact do not release nickel in concentrations above 0.5
microgram/cm2/week (see legal reference).
Comment: Max limit in legal reference when tested according to EN1811:1998.
P1.10*REACH Article 33 information about substances in articles is available at (add URL or mail contact):
P2 Batteries
P2.1*If the product contains a battery or an accumulator, it is labeled with the disposal symbol and if it contains
more than 0.0005% of mercury (for button cells only) by weight, or more than 0.004% of lead, it shall be
marked with the chemical symbol for the metal concerned, Hg or Pb. Information on proper disposal is
provided in user manual. (See legal reference)
P2.2*Button cells used in the product do not contain more than 2% by weight of mercury. Other batteries or
accumulators do not contain more than 0.0005% of mercury or 0.002% of cadmium. (See legal reference)
P2.3*Batteries and accumulators are easily removable by either users or service providers (as dependent on the
design of the product). Exception: Batteries that are permanently installed for safety, performance, medical
or data integrity reasons do not have to be “easily removable”. (See legal reference)
P3 Safety, EMC connection to the telephone network and labeling
P3.1*The product complies with legally required safety standards as specified (see legal reference).
P3.2*The product complies with legally required standards for electromagnetic compatibility (see legal reference).
P3.3*If product is intended for connection to a public telecom network or contains a radio transmitter, it complies
with legally required standards for radio and telecommunication devices (see legal reference).
P3.4*The product is labeled to show conformance with applicable legal requirements (see legal reference).
P4 Consumable materials
P4.1*If a photo conductor (drum, belt etc.) is used in the product, it does not contain cadmium max 0.01% (see
legal reference and Note B1).
P4.2*If ink/toner is used in the product, it does not contain cadmium max 0.1% by weight (see legal reference).
P4.3*If the ink/toner formulation/preparation is classified as hazardous according to applicable regulations, the
product/packaging is adequately labeled and a Safety Data Sheet (SDS) in accordance with these
requirements is available (see legal reference).
P5 Product packaging
P5.1*Packaging and packaging components do not contain more than 0.01% lead, mercury, cadmium and
hexavalent chromium by weight of these together.
P5.2*Plastic packaging material is marked according to ISO 11469 referring ISO 1043 (see legal reference).
P5.3*The product packaging material is free from ozone depleting substances as specified in the Montreal
Protocol (see legal reference).
Comment: Legal reference has no maximum concentration values.
Note B1: Restriction applies to the homogeneous material, unless other specified and expressed in weight %.

Annex B of ECMA-370 4th edition, June 2009 Page 3 (6)
Model number *SCX-8040ND
Issue date *2010-01-18 Logo
Product environmental attributes - Market requirements - Environmental conscious design Requirement met
Item *=mandatory to fill in. Additional information regarding each item may be found under P14. Yes No n.a.
P6 Treatment information
P6.1*Information for recyclers/treatment facilities is available (see legal reference).
P7 Design
Disassembly, recycling
P7.1*Parts that have to be treated separately are easily separable
P7.2*Plastic materials in covers/housing have no surface coating.
P7.3*Plastic parts >100g consist of one material or of easily separable materials.
P7.4*Plastic parts >25g have material codes according to ISO 11469 referring ISO 1043.
P7.5 Plastic parts are free from metal inlays or have inlays that can be removed with commonly available tools.
P7.6*Labels are easily separable. (This requirement does not apply to safety/regulatory labels).
Product lifetime
P7.7*Upgrading can be done e.g. with processor, memory, cards or drives
P7.8*Upgrading can be done using commonly available tools
P7.9. Spare parts are available after end of production for: 5years
P7.10 Service is available after end of production for: 5years
Material and substance requirements
Product cover/housing material type:P7.11*Material type: ABS Material type: PC+ABS Material type:
P7.12 Electrical cable insulation materials of power cables are PVC free.
P7.13 Electrical cable insulation materials of signal cables are PVC free
P7.14 All cover/housing plastic parts >25g are free from chlorine and bromine.
P7.15 All printed circuit boards (without components) >25g are halogen free. as defined in IEC61249-2-21. (See
Note B2)
P7.16 Flame retarded plastic parts >25g in covers / housings are marked according ISO 1043-4:
Marking: >PC+ABS-FR(40)<
P7.17 Alt. 1
Chemical specifications of flame retardants in printed circuit boards >25g (without components):
TBBPA (additive) ,TBBPA (reactive) , Other; chemical name: , CAS #:
Alt. 2
Chemical specifications of flame retardants in printed circuit boards (without components) >25g according
ISO 1043-4:
P7.18 Alt. 1
Flame retarded plastic parts >25g contain the following flame retardant substances/preparations in
concentrations above 0.1%:
Comment: No legal limits exist, this is a market requirement.
1. Chemical name:
, CAS #:
2. Chemical name: , CAS #:
3. Chemical name: , CAS #:
Alt. 2
Chemical specifications of flame retardants in plastic parts >25g according ISO 1043-4:
P7.19 Plastic parts >25g are free from flame retardant substances/ preparations above 0.1% classified as R45,
R40, R46, R48, R50, R51, R53, R60, R61 and any combination of these (See Note B3)
P7.20 Of total plastic parts’ weight >25g, recycled material content is %.
P7.21 Of total plastic parts’ weight >25g, biobased material content is %.
P7.22 Light sources are free from mercury
If mercury is used specify: Number of lamps: and max. mercury content per lamp: mg
P8 Batteries
P8.1*Battery chemical composition: Li
P8.2 Batteries meet the requirements of the following voluntary program/s:
Note B2: IEC61249-2--21 has maximum limits for chlorine and bromine but does not address fluorine, iodine and astatine
which are included in the group of halogens.
Note B3: 'Starting from January 2009, Risk phrases can be replaced by Hazard phrases according to the Globally
Harmonized System (GHS), mandatory by December 2010.

Annex B of ECMA-370 4th edition, June 2009 Page 4 (6)
Model number *SCX-8040ND
Issue date *2010-01-18 Logo
Product environmental attributes - Market requirements (continued) Requirement met
Item Yes No n.a.
P9 Energy consumption
9.1 For the product the following power levels or energy consumptions are reported:
Energy mode *Power level at
100 V AC Power level at 115 V AC Power level at 230 V AC Reference / Standard for energy modes and test method *
Printing W W 806 W RAL-UZ 122
Ready W W 147.7 W RAL-UZ 122
Low power W W 34.07 W RAL-UZ 122
sleep W W 5.93 W RAL-UZ 122
off W W 0W RAL-UZ 122
W W W
EPS No-load
(External power supply /
charger plugged in the wall
outlet but disconnected from
the product.)
W W W
PTEC *
Typical Energy Consumption WWW
TEC *
Typical Energy Consumption kWh/week kWh/week 6.325 kWh/week
ETEC *
Annual Energy Consumption kWh/year kWh/year kWh/year
Display resolution* : Megapixels
Print Speed *: 40 Images per minute
Default time to enter energy save mode: 30 minutes
P9.2*Information about the energy save function is provided with the product.
P9.3*The product meets the energy requirements of the following voluntary program/s:
ENERGY STAR

version:
11
Tier:
Product category:
MFD
P10 Emissions
Noise emission – Declared according to ISO 9296
P10.1 Declared A-weighted
sound pressure level Amp
L(dB)
Operator position
Mode Mode description
Declared A-weighted
sound power
level AdW
L(B) Desktop
or Desk side
Bystander positions
(only if product is not
operator attended)
Idle * *
Operation *monochrom printing *68.3
Other mode
Measured according to: ISO7779 ECMA-74
Other RAL-UZ122 (only if not covered by ECMA-74 with LpAm measurement distance m)
P10.2 The product meets the acoustic noise requirements of the following voluntary program/s:

Annex B of ECMA-370 4th edition, June 2009 Page 5 (6)
Model number *SCX-8040ND
Issue date *2010-01-18 Logo
Product environmental attributes - Market requirements (continued) Requirement met
Item Yes No n.a.
Chemical emissions from printing products
P10.3*Test performed according to ECMA-328 (ISO/IEC 28360) standard , other specify: RAL-UZ122
P10.4 Typical emission rate (print phase) is (mg/h):
Dust 0.45 Ozone 0.61 Styrene 0.14 Benzene 0.002 TVOC 3.8
P10.5 Chemical emission requirements of the following voluntary program/s are met for :
Dust
Ozone Styrene Benzene TVOC
Electromagnetic emissions
P10.6 Computer display meets the requirement for low frequency electromagnetic fields of the following voluntary
program/s:
P11 Consumable materials for printing products
P11.1*A Safety Data Sheet (SDS) is available for the ink/toner preparation, even if not legally required (see P4.3).
P11.2*Paper containing post-consumer recycled fibers can be used, provided that it meets the requirements of
EN12281.
P11.3*2-sided (duplex) printing/copying is an integrated product function.
P12 Ergonomics for computing products
P12.1*The display meets the ergonomic requirements of ISO 9241-307 for visual display technologies.
P12.2*The physical input device meets the requirements of ISO 9995 and ISO 9241-410.
P13 Packaging and documentation
P13.1*Product packaging material type(s): PAPER weight (kg): 5.0
Product packaging material type(s):
EPS weight (kg): 0.5
Product packaging material type(s):
 weight (kg): 
P13.2*Product plastic packaging is free from PVC.
P13.3*Specify media for user and product documentation (tick box):
Electronic , Paper , Other
P13.4*For paper user and product documentation, please specify contained percentage of post-consumer recycled
fiber: %
P14 Additional information (See Note B4)
P14.1 Toner Catridge Yields : 35,000 / 20,000 pages (ISO/IEC19752)
Note B4: Additional lines may be inserted to declare further items, by positioning the cursor at the far right of the row and
hitting the <Enter> key.

Annex B of ECMA-370 4th edition, June 2009 Page 6 (6)
Legal references Europe Annex B
Reference Declaration item
2002/95/EC (ROHS Directive) P1.1, P4.1
REACH, Annex XVII P1.6, P1.8, P4.2
REACH, Annex XVII P1.4
REACH, Annex XVII P1.2
REACH, Annex XVII P1.7
REACH, Annex XVII P1.9
Regulation (EC) No. 2037/2000, 2038/2000, 2039/2000 P1.3
Norwegian regulation relating to restrictions on the use
of certain dangerous chemicals 20.12.2002 P1.5
2006/66/EC (Battery and accumulators Directive) P2.1, P2.2, P2,3, P3.4, P8.1
2006/95/EC (Low Voltage Directive) P3.1, 3.4
2004/108/EEC (New EMC Directive) P3.2, 3.4
1999/5/EC (R&TTE Directive) P3.3, 3.4
“REACH" Regulation (1907/2006), annex VII P1.10
(EC) No.1272/2008 regulation on classification, labeling
and packaging (CLP) P4.3
REACH article 31, annex II P4.3
2004/12/EC (Directive on packaging and packaging
waste) P5.1
(97/129/EC) (Commission Decision on Identification
System for Packaging Materials P5.2
2037/2000/EC Regulation on Substances that Deplete
the Ozone Layer P5.3
2002/96/EC (WEEE directive) P3.4, P6.1
(EC) No.1272/2008 regulation on classification, labeling
and packaging (CLP) P7.19