Samsung Digimax 330 User manual

1
CONTENTS
ⅠⅠ
.. SSPPEECCCCIIFFIICCAATTIIOONN
1. SPECIFICATION ……………………………………………………………………………………………… 2
2. SYSTEM REQUIRMENT ……………………………………………………………………………………… 2
ⅡⅡ
.. FFAAQQss
1. SET UP USB DRIVER FOR WINDOWS.………………………………………………………………………3
2. HOW CAN I CHECK IF THE USB STORAGE DRIVER HAS BEEN INSTALLED SUCCESSFULY ………4
3.
USB DRIVER INSTALLATION FOR MACINTOSH ………………………………………………………5
4. OTHERS ……………………………………………………………………………………………………6
ⅢⅢ.. EEXXPPLLOODDEEDD VVIIEEWW AANNDD PPAARRTTSS LLIISSTT
1. FRONT COVER ASSEMBLY ………………………………………………………………………………… 7
2. B
ODY ASSEMBLY …………………………………………………………………………………………… 9
3. BACK COVER ASSEMBLY ………………………………………………………………………………… 11
4. PACKING ITEM ………………………………………………………………………………………………13
ⅣⅣ.. PPRROODDUUCCTTSS CCOONNSSTTRRUUCCTTIIOONN
1.
BLOCK DIAGRAM …………………………………………………………………………………………… 15
2. PARTS ARRANGEMENT FOR EACH PCB ASS’Y
1) MAIN PCB ASSEMBLY ……………………………………………………………………………………16
2) LCD PCB ASSEMBLY ……………………………………………………………………………………18
3) JACK PCB ASSEMBLY ……………………………………………………………………………………19
4) STROBO PCB ASSEMBLY ………………………………………………………………………………20
5) TOP PCB ASSEMBLY ……………………………………………………………………………………21
5) POWER PCB ASSEMBLY …………………………………………………………………………………22

2
11.. SSppeecciiffiiccaattiioonnss
Image Sensor 1/1.8" CCD Seneor with 3.3Mega pixels(Effective no. of pixels:3.1M)
Lens f= 8 ~ 24mm(35mm film equivalent : 38 ~ 114mm)
F 3.4 ~ F3.6
Digital Zoom Record mode : 2X, Play mode : 2X
Viewfinder Real image optical viewfinder
LCD Monitor 1.8”color TFT LCD
Focusing Auto focusing
Focus distance Normal : 0.4m ~ Infinity, Macro : 0.08m ~ 0.4m
Shutter Mechanical and Electronic shutter
Shutter Speed 2 ~ 1/500sec.
Exposure Program AE / Exposure compensation ±2EV (0.5EV steps)
ISO Equivalent 100
Driver Mode Single / Continuous / Multi-shot 16 / Self-timer
White Balance Auto/Manual(Daylight, Fluorescent, Tungsten)
Flash Auto flash/Fill-in flash/Flash off/Red-eye reduction/Slow Sinc
Flash Range Wide : 0.4m ~ 3.0m, Tele : 0.4m ~ 2.0m
Self-timer 10sec.
Storage CompactFlash Card
FIle Format JPEG(DCF compliant), DPOF compliant
Image Size Large : 2048X1536 pixels, Medium : 1024X768 pixels
Small : 800X600 pixels
Stroge Capacity(16MB) Large : Super fine 8±1, FIne : 12±2, Normal : 16±3
Medium : Super fine 34±2, FIne : 50±4, Normal : 78±6
Small : Super fine 80±2, FIne : 128±8, Normal : 188±10
Image Play Single image / Thumbnail / Slide show
Interface Digital output connector : USB
Video output : NTSC / PAL (user selectable)
DC power input connector : 6.0V
Power Source 2 X AA alkaline(high capacity recommended) / Ni-MH batteries.
AC adapter (optional)
Dimensions(WxHxD) 116x73x62mm
Weight 280g (without batteries and card)
22.. SSyysstteemm rreeqquuiirreemmeenntt
Ⅰ
. SPECIFICATIONS
FFOORR WWIINNDDOOWWSS
Windows 98, 98SE, ME, 2000, XP
MMX Pentium Processor 233MHZ or above
Min. 32MB of RAM
110MB of available harddisk space
USB port, CD-ROM Driver
SVGA(800X600 pixels), capable of displaying at least 16bits color
(24bit color display adaptor, True color display recommended)
FFOORR MMAACCIINNTTOOSSHH
Power Mac G3 or later
OS 8.6 or later
Min 32MB RAM
110MB of available harddisk space
USB port, CD-ROM Driver

3
Ⅱ. FAQs
▶▶SSeett uupp UUSSBB ddrriivveerr ffoorr WWiinnddoowwss ..
When you put the Driver CD-ROM provided withe this camera into the CD-ROM driver, the following
frame is automatically run.
1. Start installation of Digimax 330 window will be displayed. Click[NEXT] to start installation.
2. After completing 'set up', click[Finish].
3. When the USB driver installation is completed a icon will be displayed on desktop.

4
Ⅱ. FAQs
▶▶HHooww ccaann II cchheecckk iiff tthhee UUSSBB SSttrrooggee ddrriivveerr hhaass bbeeeenn iinnssttaalllleedd
ssuucccceessssffuullllyy??
Connect camera to the PC with the provided USB cable and turn it on at the PC mode.
This time, if verified normally, 「Samsung Digimax 330」will be displayed in the system properties
as shown in the following figure.
To check System properties, double click 「Start → Setting → Controller → System → Device
Manager → Imaging Device」or place the mouse cursor on 「My Computer」icon of PC
screen, press the right button of mouse, and select 「properties」from the menu and the
「Samsung Digimax 200 」will be dispalyed in the system properties as shown in the following figure.

▶▶UUSSBB DDrriivveerr iinnssttaallllaattiioonn ffoorr MMaacciinnttoosshh..
The following operation is required for both OS8.6 and OS 9.X.
1. Select appropriate driver for your operation
system.
The driver for OS X(10) use the OS 9.x.
2. Dobule click icon for installation.
3. When "Welcome" dialog box appers, click[Continue...]
4. Click the install button to install.
5. Look the warring message then click the continue button.
If you want to leave, please click the cancel to leave.
6. Install was successful and click the restart button to initial your system.
5
Ⅱ. FAQs

6
Ⅱ. FAQs
Q1. How can use this camera for download from WIN XP?
A.1. When you insert the TWAIN Driver CD and driver is installed automatically
and then " New hardware found" message will appear when connecting the USB cable to PC.
Please refer to the installation method as below;
The Found New Hardware Wizard will start automatically, and select [Install the software
automatically(Recommended)] and click the [Next] button.
a. a warning message will appear. However the driver can be used with Windows XP stably.
b. Therefore click [Continue Anyway] to proceed installation.
c. The driver will be installed on your computer.
Q2. How to install the Mac OS X(10)?
A2. The Driver for Mac OS X use is not offered additionally but it's Mac OS 9.X or better,
thus you can use it.
There will be no problem for Mac OS X.
Q3. I have set up the correct date and time and the caamera appears to be retaining this correctly
the date/time does not appear on any photographs either on the LCD screen or on the computer
after downloading from the camera. Why is this?
A3. Digimax 330 is available to display the date & time on LCD monitor but unable overlay of
date & time information on images.
If you want to overlay of date & time on images, you should be input the text in the Adobe photodelux.

7
11.. FFRROONNTT CCOOVVEERR AASSSSEEMMBBLLYY
ⅢⅢ.. EEXXPPLLOODDEEDD VVIIEEWWSS AANNDD PPAARRTTSS LLIISSTT
1-1 1-2
1-3
1-4
1-6
1-5
1-7
1-3
1-8 1-10
1-10
1-9
1-11

8
ⅢⅢ.. EEXXPPLLOODDEEDD VVIIEEWWSS AANNDD PPAARRTTSS LLIISSTT
▶▶PARTS LIST
1-1 9007-1754-01A FRONT COVER ASS'Y (DIGIMAX 330) 1
9007-1757-01A FRONT COVER ASS'Y (KENOX DIGIMAX 330) 1
1-2 7217-2491-01A SB BUTTON COVER 1
1-3 6107-0497-01A SB BUTTON SPRING 1
1-4 7217-2492-01A FRONT VOBER (DIGIMAX 330) 1
7217-2516-01A FRONT VOBER (KENOX DIGIMAX 330) 1
1-5 7217-2493-01A BARREL PANEL 1
1-6 7217-2494-01A GRIP COVER 1
1-7 7217-2495-01A FINDER WINDOW 1
1-8 7217-2496-01A IGBT WINDOW 1
1-9 7217-2497-01A SELF WINDOW 1
1-10 6003-0328-01A SCREW 2
1-11 6003-0329-01A SCREW 3
1-12 9007-1755-01A BATTERY COVER ASS'Y 1
Fig.No. Parts No. Parts Name Q'ty Remarks

9
ⅢⅢ.. EEXXPPLLOODDEEDD VVIIEEWWSS AANNDD PPAARRTTSS LLIISSTT
2-1
2-2
2-6
2-7
2-8
2-10
2-4
2-15
2-16
2-20
2-3 2-5
2-11
2-12
2-13
2-9
2-19
2-19
2-19
2-14
2-19
2-19
2-17
2-19
2-18
2-18
22.. BBOODDYY AASSSSEEMMBBLLYY

10
ⅢⅢ.. EEXXPPLLOODDEEDD VVIIEEWWSS AANNDD PPAARRTTSS LLIISSTT
▶▶PARTS LIST
2-1 2201-0004-01A CAP ELEC. 1
2-2 0704-0081-01A COLER LCD PANEL 1
2-3 7211-0642-01A REFLECTOR BASE 1
2-4 7011-0405-01A STRAP PLATE 1
2-5 7211-0643-01A IGBT MASK 1
2-6 7211-0644-01A TFT LCD HOLDER 1
2-7 9008-0500-01A MAIN PCB ASS'Y 1
2-8 9008-0501-01A POWER PCB ASS'Y 1
2-9 9008-0502-01A LCD PCB ASS'Y 1
2-10 9008-0503-01A TOP PCB ASS'Y 1
2-11 9008-0504-01A FLASH PCB ASS'Y 1
2-12 9008-0505-01A JACK PCB ASS'Y 1
2-13 9002-1058-01A BARREL ASS'Y 1
2-14 9001-0881-01A BODY ASS'Y 1
2-15 7011-0406-01A BATTERYCONTACT-A 2
2-16 7011-0407-01A BATTERYCONTACT-B 1
2-17 6003-0332-01A SCREW 3
2-18 6003-0328-01A SCREW 2
2-19 6003-0329-01A SCREW 8
2-20 7211-0645-01A TRIPOD 1
Fig.No. Parts No. Parts Name Q'ty Remarks