Samsung DVD-V2500 User manual

DVB-U2900
Instruction Manual
VllSHi-Fi
VIDEO www.samsungasc.com

iiiiiiiiiiiiiiiiiiiiiiiii,_,_,_,_,_,_,_,_,_,'..............................................................................................................
WARNING:
TOPREVENT DAMAGEWNICH MAYRESULT IN
FIRE OR ELECTRICSHOCKHAZARD DO NOT
EXPOSE TNISAPPLIANCE TO RAIN OR
MOISTURE
WARNING:
TO AVOID HAZARDOUS EXPOSURE TO
INVISIBLE LASER RADIATION, DO NOT OPEN
OR REMOVE/DEFEAT LASERTRANSPORT
PROTECTIVE HOUSING
USER/INSTALLERCAUTION:
Yourauthoritytooperatethis FCC certified
equipl:Tent could be voided if you r:Take changes or
modificationsnotexpresslyapproved bythe
manufacturer, who is responsibleforcompliance
with Part 15 FCC rules
NOTETOCATVSYSTEMINSTALLER:
This reminder isprovided tocall the CATVsystem
installer's attention to Article 820-40 of[he
National ElectronicCodethatprovidesguidelines
for proper grounding and, in particular, specifies
thatthecableground shall beconnected to[he
grounding system ofthebuilding, asclosetothe
pointofcableentryas practical
....... .......
I sin[ende0toalert
I theusertothepresenceof
I _ urfinsu ated dangerousvoltage
I -- within the product'senclosure
Ithat may be of sufficient
I magn tudeto constitute risk of
I n,eo l ric L
I olislntendeO[oaler[
I!W\ theusertothepresenceof
IZ__'&_ irnportantoperatlng and
I i tructioos,nthe
Iliteratureaccompanyingthis
Copy Notification
Federal law provides severe civil and criminal
penalties for the unauthorized reproduction,
distribution, or exhibition of copyrighted motion
pictures and videotapes. (Title 17r United States
Code, Sections 501 and 506)
Macrovision Notification
This product incorporates copyright protection
technology that is protected by method claims of
certain US patents and other intellectual property
rights owned by Macrovision Corporation and other
rights owners Use of this copyright protection
technology must be authorized by Macrovision
Corporation, and is intended for home and other
limited viewing uses only unless otherwise
authorized by Macrovision Corporation Reverse
engineering or disassembly is prohibited
CAUTION:
To prevent fire, shock hazard, or annoying
interference, use only the recommended
accessories To prevent electric shock, do not use
this (polarized) plug with an extension cord,
receptacle, or other outlet unless the blades can be
fully inserted to prevent blade exposure To reduce
the risk of electric shock, do not remove the unit
cover or back There are no serviceable parts
inside Refer servicing to qualified personnel only
CUIDADO:
Para prevenir incendio, nesgo de choque, o
interferencia enfadosar use solamente los
accesorios recomendados Para prevenir
electrochoque, no use este enchufe (polarizado)
con un cordon de extension, tomb de corriente, o
cualquier otra tomB a menos que los dientes
puedan ser completamente insertados para preven_r
exposicion de los dientes Para reducir el riesgo de
descarga electrica, no remueva la cubierta o la
parte posterior del equipo Den[to del equipo no
hay partes que requieren servicio Dir_ase
solamente a personal calFicado cuando requ_era
servido
ATTENTION:
Po_r e_ _e_ _7_ r_E_9_ de c_ocs¢ ou
accessoires recommandes Pour eviter les chocs
electriques, ne pas employer cette prise (polarisee)
avec une rallonger une prise de courant ou une
autre sortie de courant a nToins que les lames
peuvent ¢tre inserees a fond pour I'exposition des
lames Pour reduire les nsques de chocs
electriques, ne pas retirer le couvercle ou I'arriere
du module. II n'y a pas de piece utilisable
I'interieur Ne faire effectuer I'entreden que par un
personnel qualifie

Important Safety Instructions
))))))))))))))))
1. Read these instructions.
2. Keep these instructions.
3. Heed allwarnings.
4. Follow allinstructions. ))))))))))))))))
5. Do not use thisapparatus near water. ))))))))))))))))
6m C_ea. O._ with dry c_othl HHHHHHHH
7. DO not block any ventilation openings. Install in accordance with the manufacturer's instructions. ))))))))))))))))
8. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifiers) that
produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or
the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10. Protect the power cord from being from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
When a used, caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in
any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or been dropped.
((((((((((((((((((((((((((((((((((..........................................................

Table of Contents 1
iiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiii • Safety
iiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiii • Important Safety Instructions ....................................... 3
iiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiii • Feature Summary
iiiiiiiiiiiiiiiiiii •FeatureSummary ............................................... 7
iiiiiiiiiiiiiiiiiii • Unpack ........................................................ 7
iiiiiiiiiiiiiiiiiii • DiscTypeandCharacteristics ...................................... 8
iiiiiiiiiiiiiiiiiii
!!!!!!!!!!!!!!!!!!!
iiiiiiiiiiiiiiiiiii • 1- System Overview
iiiiiiiiiiiiiiiiiii • FrontPanelOverview ............................................. 9
iiiiiiiiiiiiiiiiiii • RearPanel ..................................................... 10
iiiiiiiiiiiiiiiiiii • FrontPanelDisplay .............................................. 10
iiiiiiiiiiiiiiiiiii • RemoteOontrolOverview ......................................... 11
iiiiiiiiiiiiiiiiiii • Insert Batteries into Remote ........................................ 11
iiiiiiiiiiiiiiiiiii • Using the TV Buttons on the Remote Control .......................... 12
iiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiii • 2- Getting Started
iiiiiiiiiiiiiiiiiii R Basic Connections/Auto Setup ...................................... 13
iiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiii • 3- Basic Operation
iiiiiiiiiiiiiiiiiii • DeckOontrolButtons ............................................. 14
iiiiiiiiiiiiiiiiiii • BasicDVDOperation ............................................. 14
iiiiiiiiiiiiiiiiiii • BasicVOROperation ............................................. 15
iiiiiiiiiiiiiiiiiii • BasicTVTunerOperations ........................................ 16
iiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiii• 4-systemSetup
iiiiiiiiiiiiiiiiiii • On-Screen Menu Navigation ....................................... 16
iiiiiiiiiiiiiiiiiii • MenuLanguage ................................................. 17
iiiiiiiiiiiiiiiiiii • ManualClockSet ................................................ 18
iiiiiiiiiiiiiiiiiii • TunerBandSetting .............................................. 19
iiiiiiiiiiiiiiiiiii , AutoOhannelMemory ............................................ 20
iiiiiiiiiiiiiiiiiii • Channel Add/Delete .............................................. 21
iiiiiiiiiiiiiiiiiii • AutoPowerOff .................................................. 22
iiiiiiiiiiiiiiiiiii • FrontPanelDimmer .............................................. 23
iiiiiiiiiiiiiiiiiii • RF Output Channel .............................................. 23
iiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiii

Table of Contents
• 5- DVD Setup
• Player Menu Language ...........................................
• Disc Menu Language .............................................
• Audio Language .................................................
• Subtitle Language ...............................................
• Parental .......................................................
• Digital Output ...................................................
• DTS ..........................................................
• Dynamic Compression ............................................
• 2XScan Audio ..................................................
• TV Aspect Ratio .................................................
• 6 - DVD Sound Setup
• A/V Receiver Connections.........................................
24
24
25
25
26
27
28
29
3O
31
32
• 7 - DVD Operations
• Special Playback Features ........................................
• Disc Menu Navigation ............................................
• Screen Fit Playback ..............................................
• Title/Chapter/Time Selection .......................................
• Zoom .........................................................
• Angle View .....................................................
• Subtitle .......................................................
• Audio .........................................................
• 3D Sound ......................................................
• Repeat Chapter/Title .............................................
• Bookmarks ....................................................
• Programmed Playback ...........................................
• Random Playback ..............................................
• MP3 Playback ..................................................
33
34
34
35
36
36
37
38
38
39
40
41
41
42
• 8 - Memory Stick
• Memory Stick ..................................................
• DAM (Digital Audio Manager) Playback ...............................
• Memory Stick Pull out ............................................
• DPM (Digital Photo Manager) Playback ...............................
• Slide Show .....................................................
• Slide Show Order ..............................................
• Photo View .....................................................
• Edit Photo ......................................................
43
47
48
48
5O
51
52
53
5

--------------• ,,i -VCRvariabl e,,SearcAut°PlaTryacking.S.pecial VCRPlaybaCskWHSPlaybacPklaybac.,k.. ' _'' ' "'''..' ' ."."."."."._".". .".".".".".".".".". .".".".".".".".".". .".".".".".".".".""' '"""'''''"""""'''''"""""'''''"""""'''''"""""'''''""e"ystem".'.F.eatures.....
--------------• •i0 -uVCsRpeciRalecordSpeeO"_ne'T°uchRecordings...(OTR)B.asic Rec°rding'R'ec°rdinRgec°rdin,g.._eatures".''.'.'.'.'.'.. . . . . . . . . . . . . '.'.'.'.'.'. '.'.'.'.'..'. . . . . . . . .. .....".. "...................................
..................• R11- TimerRecordinHgowto Set a Timer Recording
• Aippendixds. AdvanCeonnecting_A- OtherVide_vide°/c°mp°nentC°nnecti°n_'t°nit°rTSvtere° C°nnecti°nSC°nnecti°ns"Vide°.C.onnectiOnEquipment.S....................' .'(fo........DVD).........'.'.' ...............' .' .'..............".."............................r
• Appendix B- Help
•Technical Specidcaqons ...........................................
515454555
5_57589
6O
6_61623
65
1

Feature Summary
DVD+VCR Features
Perfect compatibility to playback DVDs, VCDs, audio CDs, MP3 discs or VHS Tapes.
• Enjoy a DVD moviewhile recording aTV show to theVCR.
Auto Setup instantly finds the time and runs channel search.
i RE inputsand outputs for all kinds of TVs available.
• Composite, S-Video, and Componentvideo outputs
• Universal remote providesthe fuil operation on DVD+VCR.
On-Screen Program (english/French/Spanish).
DVD Features
• 1O_bitvideo digital to analog converter and27MHz advanced digital filter
Playback of 96KHz/24-bit sources.
• DTS digital output for DTS-enhanced DVDs.
• Playback MP3files from CD-ROM.
Continued audio during 2x speed playback.
VCR Features
Hi-Fi Stereo VCR.
14 heads for superior slow motion and stop action
• Playbackof S-VHS tapes at better than standard resolution.
VISS Scan, Zero Return, Blank Search.
• 8-event/1 month timer recording.
• Time remaining counter, real time counter.
Note
*Discswhich cannot be played with this player. *Ability to play back may depend on recording
DVD-ROM _ DVD-RAM •conditions. .
CD-ROM • CDV • DVD-R • CD-RW
• CDI SVC, CVD DVD+RW,-RW Photo CD
• HD layer of super Audio CD
*CDGs play audio only, not graphics. iiiiiiiiiiiiiiiiiiiiiiiiiiiiii
Unpack
When you unpack the DVD+ VCR, please check the following list of items isincluded in the packing
case.
DVD-VCR
User'sGuide (AC68-01821A)
Registration Card(AD68-0O078A)
RCA cable for AudioNideo connection (AC99-1050OH)
RF (Radio Frequency) Antenna Cable (AC39-42O01J)
Remote Control (AK59-o0g01A)
1.5V"AA" Batteries- 2EA (AC43-12002J)

__and Characteristics 1
Th s DVD payer iscapable of playing tile following types of discs with tile corlesponding loges
al I
I
_ous screenandaudio I
I
I
VID E 0 DlUb_e_ded semenmenu, I
I
I
!
"}/ compressiontechnology I
,O_GITALVIQm --- 31/2'1 20mini I
Zo I
• I
I
!
!
I
quality over time........_
Marki_ _
F_ _ On_LB, STEREO DIGITAL _I,ll,-- _
•Play •NTSCbloddCast•Dolby •Stereodlsc•Dtgltal •DTSdsc •MP3 dlsc •MEMORY
Reg,on _,sl_r_nUo_A' D,g,tadsc Audodisc STCK
Numbe* Japanetc '
Both the DVD player and the discs are coded by region These regional codes must
match in order for the disc to play f the cedes de net match, the d sc will not pay
The Region Number for this player is described on the rear panel of the player.

Front Panel Overview
2 3 4 5 6 7
9 10 11 12 13
1DVD DECK (p,14)
2DVD OPEN/CLOSE (p.14)
3VCR DECK (p.15)
4 CHANNEL &IT (p.16)
5 RECORD (p.57)
6 DVD-VCR SELECT (p.14)
7 VCR EJECT (p.15)
8 POWER (p.14)
9 MEMORY STICK (p.43)
10 STOP (p,33)
11 REWlND/REV (p.33, 54)
14
12
13
14
15
16
17
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
151617 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
PLAY/PAUSE (P'14, 15,33, 581 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
FAST-FORWARD/FWD (p,33,54) iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
FRONT PANEL DISPLAY (P'10) iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
LINE IN 2 COMPOSITE VIDEO JACK iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
LINE IN 2 LEFT AUDIO JACK iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
LINE IN 2 RIGHT AUDIO JACK iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

Rear Panel ]
1
2
3
4
5
RF ANTENNA INPUT
RF OUT TO TV
LINE OUT TO TV (COMPOSITE)
LINE IN 1
VIDEO OUT SELECT SWITCH
* If 525P(480P) VIDEO OUT is selected, VIDEO
and S_VlDEO will not work.
* If your TV supports progressive scan, follow
the TV User's Manual's instructions regarding
progressive scan setting in the menu system.
5 6 7 8 9 10
6AUDIO LiNE OUT TO TV
(S-VIDEO OR COMPONENT)
7COMPONENT VIDEO OUT
8 DIGITAL AUDIO OUT(COAXIAL)
9 DIGITAL AUDIO OUT(OPTICAL)
10 S-VIDEO OUT
Front Panel Display 1
!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!
iiiiiiiiiiiiiiiiiiiiiiiiiill1 2
!!!!!!!!!!!!!!!!!!!!!!!!!!!! _L
!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!! _ _l
!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!
iiiiiiiiiiiiiiiiiiiiiiiii_
!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!! m
!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!
iiiiiiiiiiiiiiiiiiiiiiiiiill8 9lo
!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!
iiiiiiiiiiiiiiiiiiiiiiiii!!!1 When the light ison DVD isworking
iiiiiiiiiiiiiiiiiiiiiiiiiill2DVD, SVCD, VCD, orCDisloaded
iiiiiiiiiiiiiiiiiiiiiiiii!!_3The number to the right of the "TITLE" symbol is
iiiiiiiiiiiiiiiiiiiiiiiii!!_ the current title number
!!!!!!!!!!!!!!!!!!!!!!!!!!!!
iiiiiiiiiiiiiiiiiiiiiiiii!!_4The time, counter position, time remaining or
iiiiiiiiiiiiiiiiiiiiiiiii!!_ currentdeckstatusiediepIayed
iiiiiiiiiiiiiiiiiiiiiiiiiii:5 VHSisloaded
iiiiiiiiiiiiiiiiiiiiiiiii_6ClockhandsisonwhentimerRecordingisin
iiiiiiiiiiiiiiiiiiiiiiiii"progress
iiiiiiiiiiiiiiiiiiiiiiiiiill7 VCRisworking
!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii!iiiiii!i!ii!;_
567
11 12
Italso blinks when you pause VCR.
8 3D Sound is active
9 A DVD with a DTS soundtrack is loaded
10 The next number to the "CHAP" displays the
current chapter showing.
11 The Hi-Fi track of a VHS tape is playing
(The current TV show or video is broadcast in
Stereo)
12 Timer Recording is in progress.

Remote Control Overview
5 m
6--
7--
8--
9--
11--
12
Insert Batteries into Remote
23
,24
25
,26
27
28
29
30
32
33
34
35
36
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii i i,i,!
1 POWER(p.14) iiiiiiiiiiiiiiiiiiiiiiiiiii
2 ZOOM (p.36), TV MUTE (p.12) iiiiiiiiiiiiiiiiiiiiiiiiiii
3 0-9 (p.16) iiiiiiiiiiiiiiiiiiiiiiiiiii
4 100+(p.16) iiiiiiiiiiiiiiiiiiiiiiiiiii
5MEMORY STICK (p.43) iiiiiiiiiiiiiiiiiiiiiiiiiii
6 VOLUME+/-(p.12) iiiiiiiiiiiiiiiiiiiiiiiiiii
7 DVD(p.14) iiiiiiiiiiiiiiiiiiiiiiiiiii
8 REWIND(p.33,54) iiiiiiiiiiiiiiiiiiiiiiiiiii
SKIP BACK (p.33, 54) iiiiiiiiiiiiiiiiiiiiiiiiiii
9 STOP(p.33) iiiiiiiiiiiiiiiiiiiiiiiiiii
10 3D SOUND (p.38) iiiiiiiiiiiiiiiiiiiiiiiiiii
11 RECORD(p.57) iiiiiiiiiiiiiiiiiiiiiiiiiii
12 UP(p.16) iiiiiiiiiiiiiiiiiiiiiiiiiii
13 LEFT(p16) iiiiiiiiiiiiiiiiiiiiiiiiiii
14 SETUP(p.16) iiiiiiiiiiiiiiiiiiiiiiiiiii
ENTER(p.16) iiiiiiiiiiiiiiiiiiiiiiiiiii
15 RETURN(p.16) iiiiiiiiiiiiiiiiiiiiiiiiiii
16 TITLE (p.35) iiiiiiiiiiiiiiiiiiiiiiiiiii
SPEED(p.59) iiiiiiiiiiiiiiiiiiiiiiiiiii
17 SCREEN FIT (p. 34) iiiiiiiiiiiiiiiiiiiiiiiiiii
18 SUBTITLE(p.37) iiiiiiiiiiiiiiiiiiiiiiiiiii
TIMER(p.60) iiiiiiiiiiiiiiiiiiiiiiiiiii
19 SHUTTLE DiAL (p.33) iiiiiiiiiiiiiiiiiiiiiiiiiii
20 JOGDIAL(p.33) iiiiiiiiiiiiiiiiiiiiiiiiiii
21 OPEN/CLOSE (p.14, 15) iiiiiiiiiiiiiiiiiiiiiiiiiii
22 TVNCR(p.16) iiiiiiiiiiiiiiiiiiiiiiiiiii
23 AUDIO(p.38) iiiiiiiiiiiiiiiiiiiiiiiiiii
24 INPUTSEL (p.57) iiiiiiiiiiiiiiiiiiiiiiiiiii
ANGLE(p.36) iiiiiiiiiiiiiiiiiiiiiiiiiii
25 CHANNEL &/T (p.12, 16) iiiiiiiiiiiiiiiiiiiiiiiiiii
TRACKING A/T (p.54) iiiiiiiiiiiiiiiiiiiiiiiiiii
26 VCR, TV SELECT (p.14) iiiiiiiiiiiiiiiiiiiiiiiiiii
27 FAST-FORWARD (p.33, 54) iiiiiiiiiiiiiiiiiiiiiiiiiii
SKIPNEXT(p.33,54) iiiiiiiiiiiiiiiiiiiiiiiiiii
28 PLAY/PAUSE(p.14,15) iiiiiiiiiiiiiiiiiiiiiiiiiii
29 CLEAR(p.40,41) iiiiiiiiiiiiiiiiiiiiiiiiiii
30 DISC MENU (p.34) iiiiiiiiiiiiiiiiiiiiiiiiiii
31 RIGHT(p.16) iiiiiiiiiiiiiiiiiiiiiiiiiii
32 DOWN (p.16) iiiiiiiiiiiiiiiiiiiiiiiiiii
33 DISPLAY(p.35) iiiiiiiiiiiiiiiiiiiiiiiiiii
34 MODE(p.41) iiiiiiiiiiiiiiiiiiiiiiiiiii
REPEAT(p39,54) iiiiiiiiiiiiiiiiiiiiiiiiiii
35 SLOW iiiiiiiiiiiiiiiiiiiiiiiiiii
36 MARK(p.40) iiiiiiiiiiiiiiiiiiiiiiiiiii
SEARCH(p.56) iiiiiiiiiiiiiiiiiiiiiiiiiii
• Removethe batter cover on the remote
• Insert two 1.5V"AA" batteries as shown, making sure of the correct
polarities(+/-)
• Slide the cover back onto remote.

Using the TV Buttons on the Remote Control 1
Your VCR remote control will work with Samsung televisions and
compatible brands.
To determine whether your teIevision is compatible, follow the instructions
below
1 Switchyour television on.
2Point the remote control towards the teIevision.
3Hold down the TV button and enter the two-figure code
corresponding to the brand of your television, by pressing the
appropriate numeric buttons.
Brand Codes Brand Codes
SAMSUNG 01, 14, 15,23 LOEWE 28
SHARP 02, 16, 22 ZENITH 17
SONY 03 LG 06, 08, 18
RCA 07, 29 MAGNAVOX 04
TOSHIBA 09 EMERSON 21
PANASONIC 12, 24 SANYO 05, 20
JVC 11 DAEWOO 19
HITACHI 10 NOBLEX 25
MITSUBISHI !3 TELEFUNKEN 26
NEWSAN 27
Result: Ifyour television is compatible with the remote control, it
will switch off. it is now programmed to operate with the
remotecontrol.
If several codes are indicated for your television brand, try
eachone in turn until you find one that works.
(_" When you change the batteries in the remote control, you
must _p_ogram the code, following the same procedure
You can then control the television using the foIIowing buttons.
Button Function
POWER (_) Usedto switchthe television on andoff.
iNPUT SEE (_) Usedto select an external source.
VOL + or- (_) Usedto adjust the volume of the television.
OH (• or T) (_ Usedto select the required channel.
MUTE (_) Usedto toggle the sound on and off.
The various functions will not necessarily work on all
televisions. If you encounter problems, operate the
television direct]y.

Basic Connections/Auto Setup
In this section, you will connect the DVD-VCR to your television
and run Auto Setup, which automatically searchesfor channels and
setsthe player's internal clock.
NOTES:
• See Appendix A for Advanced Connections.
•Standard RFor Line connection between DVD-V2500 & your TV
are required to run DVD+VCR setup menu, even if
connect S-Video or Component Video Output //_you
for a better picture quality.
1 Connect Antenna/Cable to DVD+VCR
Connect an external indoor/outdoor antenna or wail outlet antenna
cable to the Ant-In jack on the rear panelof DVD-V2500.
2 Connect DVD+VCR to TV
Chooseoneofthefollowingmethodstoconnectthe DVD-VCRtoyourTV:
RF Connection
Connect the suppliedRF antenna cablefrom the OUT (TO TV)jack
on the back panelof the DVD-VCRto yourtelevision'sAntenna Input.
LineConnection
Connect an RCA-type audio/video cable (red, white, yellow) from
the LINE OUT jacks on the back panel of the DVD-VCR to your
television's Line in jacks. Use redfor right audio, white for left
audio, andyellow for video.
NOTE: It is recommended that you use the Line Connection if your
TV is equipped with RCA jacks.
Plug In
Connect the DVD-VCR power cordto astandard 120V/60Hzwail
outlet. Don't pressany buttons on the DVD-VCR or remote during
auto setup. "AUTO" blinkswhile the DVD*VCR runs an auto setup
procedure, where it will automatically search for all active channels
and set the clock. When Auto setting has been completed, the front
panel displays the current time. IfAuto Clock set is unable to find a
channel to set the clock,you can set the clock manually; See page
18.
4 Turn On DVD+VCR
Pressthe POWER button on the remote control or on the
DVD-VCR's front panel.
5 Turn On TV
Pressthe POWER button on your TV,
6 Set TV to Channel 3, 4 or Line
Be sure to use thesame channel you selected inStep 2. Ifyou
usedthe Line Connection, set your TVto its Line Input.
FromAntenna or Cable
f
To TV's Antenna input

Buttons 1
The DVD-VCR uses one set of controls to operate both decks. The
following buttons are helpful in successfully controlling each deck.
ii!!!! !!!!i i!!ilil
iiiiiii!iiii!ii!i!i!!i!iiiiii!iiii! !! i{iiii!ii!ililiiii!iiiiiii!!iiiiii
POWER Button
Press the POWER button on the remote control or front panel to
turn on the DVD-VCR.
DVD Button
Pressthe DVD button on the remote control or front panel when
you want to control the DVD deck.
• The DVD indicatorwill light on the Front Panel Displayto show
thatthe DVD deck is selected.
3 VCR Button
4
Pressthe VCR button on the remote control or front panel when
you want to control the VCR deck.
• The VCR indicatorwill light on the Front Panel Displayto show
thatthe VHS deck isselected.
INPUT SEL, Button
Pressthe INPUT SEL. button repeatedly to cycle through all of
your input sources, including the Tuner (Ch##), Line 1(rear AV
input), and Line 2 (front AV input).
. Input Select is only available when the VCR deck is selected.
Basic DVD Operation ]
Follow the instructions below to playback a DVD.
1 Open the Disc Tray
Press the Open/Close button on your remote or front panel to both
poweFon and open the tray.
2Insert a Disc
Put a disc inthe center ofthe tray, with the label-printed side facing
up.
3 Close the Disc Tray
Press the Open/Close button on your remote or front panel to close
the tray.
4 Play a DVD
Press the Play/Pause button on your remote or front panel.
• Mostdiscs will startto playback as soonas the tray closes.
• Ifa DVD has adisc menu, the menu may popup on TV screen.
5 Additional DVD Options
• For advanced DVD Setup options, see pages 24~31.
° For special DVD Playback features,see pages 33~42.

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! iii
Basic VCR Operation
To play a videotape, simply insert it in the VH$ deck and press the
Play button. Tapes without Record Safety Tabs can be set to play
automatically when inserted; see page 56.
1 Insert VHS Tape
Insert a standard VHS videotape into the VHS Deck.
• Power will turn on aatomaticaIly when you insert a videotape.
2 Play Tape
Press the I_'11(Play/Pause) button on the remote control or front
panel. If the tape is missing the Record Safety Tab and Auto Play
isturned on, the tape will beginto play automatically, see page 56.
3 Stop Playback
Pressthe • (Stop) button on the remote control or front panel
4 Eject Tape
Pressthe OPEN/CLOSE batten on the remote control or the
EJECTbatten on the front panel
5 Additional VCR Options
• For special VCR Playback features, see pages 54~56.
• For VCR Recording features, see pages 57~60.
• For Timer Recordingfeatures, see page 60.

Basic TV Tuner Operations ]
The following buttons are used when watching television via the
D VD- VCR"sbuilt-in TV tuner.
1 TV/VCR
Pressto switch between your TV's tuner and the VCR's internaI
tuner.
2 Channel Up/Down
Pressto change to the next or previous channel.
3 0-9 Buttons
Pressto select channels directly.
4 101)+Button
Pressto select channels 100 and higher. First, pressthe 100+
button,then pressthe remaining digits using the 0-9 buttons.
5 Display
Pressto display the channel you are watching.
• Also works inDVD and VCR mode.
On-Screen Menu Navigation
The Setup Menu is the opening
screen of the on-screen menu
system
The on.screen menu systemallows you to setall functions for your
DVD-VCR. The following buttons are used to open and navigate
through the on-screen menu system.
1 SETUP Button
With the DVD instop mode, press to access the DVD-VCR on-
screen menu system.
2 Up/Down and Left/Right
Moves menu selection cursor up, down, left and rightto cycle
through menu options
3 ENTER Button
Press to confirm settings in certain menus.
4 RETURN Button
Returns to the last menu viewed or exits the menu system.

Menu Language
Follow these steps to change the on.screen menu language to
English, French or Spanish.
1 Open "SETUP MENU"
With the DUD in stop mode, press the SETUP button.
2 Set "Language"
Usingthe Up and Downbuttons, movethe selection arrow to
"Language/ldioma/Langue," then pressthe ENTER button.
3 Set menu Language
Movethe seIection bar to your desired Language, then pressthe
ENTER button,
English Setup Menu

Manual Clock Set 1
iiiiiiiiiiii_
AlJ[o
M_nual
RETURN Av ENTER
TIME DATE YEAR
120Q_ 1/01 2002 TUE
RETURN AV '41,
If Auto Setup was unable to find a local TV station to set the DVD-
VCR's internal clock, follow these instructions to set the date/time
manually.
NOTE: It is important to set the clock for accurate Timer
Recording.
1 Open "SETUP MENU"
With the DVD instop mode, pressthe SETUP button.
2 Select "VCR Setup"
Usingthe up and down buttons, movethe selection cursor to
"VCRSetup," then press ENTER to select.
3 Select "Clock"
Usingthe up and down buttons, movethe selection cursor to
"Clock Set/Adjust," then press ENTER to select.
4 Select "MANUAL"
Movethe selection arrow to "MANUAL", then press ENTER to turn
this feature "On,"
The "Set Clock Menu" will change as shown.
5 Set the Clock
Press LEFT/RIGHT to select each of the following options, then
pressUP/DOWN to set each option:
• Set Hour - Set the hour using the up and down buttons.
• Set Minute - Set the minute using the up and down buttons.
• Set Month - Set the month usingthe up and down buttons.
• Set Day - Set the day using the up and down buttons.
• Set Year - Set the year using the up and down buttons.
6 Confirm Settings
Pressthe RETURN button to save your clock settings and return to
the Setup menu.
• Press Return again to exit.

Tuner Band Setting
This feature allows you to manually set the DVD-VCR's tuner band
to Antenna or Cable, whichever you connected to the Antenna In
jack during initial setup.
•Use this setting only if Auto Setup detected the incorrect tuner
band, Le. channels are coming in on the wrong channel numbers.
1 Open "SETUP MENU"
With the DUD instop mode, pressthe SETUP button.
2 Select "VCR Setup"
Using the up and downbuttons, movethe selection cursor to
"VCR Setup," then press ENTER to select.
3 Select "Channel"
Using the up anddown buttons, move the selection cursor to
"Channel", then press ENTER to seIect.
4 Select "Ant/Cable"
Move the selection arrow to "Ant/Cable" then press rightto select
from the following options:
• Antenna - Indicates that the DVD-VCR is connected to an indoor
or outdoor VHF/UHF antenna.
Cable TV - Indicatesthat the DVD-VCR is connectedto CabIe TV.
• Anl/Cable IAistenrlaJ
Au[o chafer/el nler/_ory
Ch_r/rlelad(!/_!ele[e
[_ RETURN AV 4b
iiiiiiiiiiiiiiiiiiiil}_{iii}¸}¸}¸}¸}¸}¸}¸}¸}¸}¸}¸}¸}¸}¸}¸}¸}¸}¸}¸}¸}¸}¸}¸}¸}¸}¸}¸}¸}¸}¸}¸}¸}¸}¸}¸}¸}¸}¸}¸}i;i;iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii_@7777777777777777777777777777777777777777777_!ii!
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii 'i i
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIB.......................................................................
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii.................................................................................................................................................

Auto Channel Memory 1
Auto Channel Memory will automatically seek and store all active
channels in your area.
1Open "SETUP MENU"
With the DVD in stop mode, pressthe SETUP button.
2 Select "VCR Setup"
Usingthe up and down buttons, movethe selection cursor to
"VCR Setup," then press ENTER to select.
3 Select "Channel"
Usingthe up and down buttons, movethe selection cursor to
"Channel", then press ENTER to select.
4 Run "Auto channel memory"
Movethe selection arrow to "Auto channel memory," then press
ENTER to select.
•The DVD-VCR will automatically search for all available
channels in the selected Tuner Band. This procedure may take
afew minutes to complete.
• When finished, the lowest channel found will be displayed.