Samsung U Flex EO-BG950 User manual

QUICK
START
GUIDE
EO-BG950
Samsung U Flex Headphones
Printed in Korea
GH68-47707B Rev.1.0
EU/ASIA Type 03/2017

QUICK
START
GUIDE
EO-BG950
Samsung U Flex Headphones

2
English..................................................................4
Contents

3

4
English
f
h
e
b
a
d
cg
l
i
j
km
l
A
21

5
English
Copyright © 2017 Samsung Electronics
Bluetooth
®
is a registered trademark of
Bluetooth SIG, Inc. worldwide.
•
Please read this manual before using the device
to ensure safe and proper use.
•
Images may differ in appearance from the
actual product. Content is subject to change
without prior notice. You can access the
full user manual for more information. Visit
www.samsung.com to view device information,
the user manual, and more.
•
Before using the headset, make sure it is
compatible with your device.
Device layout
Notification light Volume (-) button
Neckband Active button
Volume (+) button Play button
Left earphone Charger port
cover
Right earphone Fastening magnet
Power switch Charger port
Microphone

6
Charging the battery
Before using the headset for the first time, you
must charge the battery.
Open the charger port cover. Connect the
headset to a computer or the USB power adaptor
via the USB cable. Plug the USB power adaptor
into an electric socket. ( )
Use only Samsung-approved chargers
and cables.
•
You can charge the headset using the
charger (sold separately).
•
The charger should remain close to the
electric socket and easily accessible
while charging.
•
The socket-outlet shall be installed
near the equipment and shall be easily
accessible.
Indicator light identification
•
Red: When charging
•
Green: When fully charged

7
English
Turning the headset on or off
Bluetooth pairing mode
ON
OFF
Connecting devices via Bluetooth
You can receive incoming calls or listen to
multimedia files when your headset is connected
to Bluetooth-enabled devices.
1. Slide the Power switch towards and hold
it for approximately three seconds to enter
Bluetooth pairing mode.
The notification light flashes red, green,
and blue.
Way 1
2. On your other device, activate the Bluetooth
feature and tap Samsung U Flex (0000)
from the list.
The PIN for the headset is the four-digit
number in parenthesis displayed on the
other device’s Bluetooth settings screen.
The number differs depending on the
headset.

8
Way 2
2. Bring the headset and other device closer
together to connect them if the device
supports Easy pairing.
The connection pop-up window appears on
the mobile device.
Tap Connect to connect the headset and the
mobile device.
Ensure that there are no obstacles
between the headset and other device.
The connection pop-up window may
not appear.
Connecting additional devices
The headset can connect to up to two Bluetooth-
enabled devices at the same time. For more
information, refer to the user manual.

9
English
Safety information
Read all safety information before using the
device to ensure safe and proper use. To view
the full safety information, refer to the Samsung
website.
The headset contains magnets in its earbuds.
The American Heart Association (US) and
the Medicines and Healthcare Products
Regulatory Agency (UK) both warn that
magnets can affect the operation of implanted
pacemakers, cardioverters, defibrillators,
insulin pumps or other electro medical
devices (collectively,“Medical Device”) within
the range of 15 cm (6 inches). If you are a user
of any of these Medical Devices, DO NOT USE
THE HEADSET UNLESS YOU HAVE CONSULTED
WITH YOUR PHYSICIAN
Use manufacturer-approved batteries,
chargers, accessories, and supplies
Do not touch the device with wet hands
Do not drop or cause an impact to the charger
or the device
Do not bend or twist the device excessively