Samsung Level On User manual

Printed in Korea
E Type. 12/2014
A00429 Rev.1.0

www.samsung.com

2
Copyright © 2014 Samsung Electronics
• Please read this manual before using the device
to ensure safe and proper use.
• Images may differ in appearance from the
actual product. Content is subject to change
without prior notice.
Notices for using Bluetooth
• Bluetooth
®
is a registered trademark of Bluetooth SIG,
Inc. worldwide.
• When the device is connected to another device via
a wireless connection, place your device near to the
connected device. Otherwise, the device may not work
properly or it may be affected by signal interference.
• Ensure that your device and the other Bluetooth device
are within the maximum Bluetooth range (10 m). The
range may change depending on the environment the
device is used in.
• Ensure that there are no obstacles between your
device and a connected device while using a wireless
connection. Obstacles include walls and fences. If
there are obstacles between the devices, the operating
distance may be reduced.
• Ensure that the Bluetooth antenna on the connected
device is not covered or obstructed.
• Bluetooth uses the same frequency as some industrial,
scientific, medical, and low power products and
interference may occur when making connections near
these types of products.

3
• Some devices, especially those that are not tested or
approved by the Bluetooth SIG, may be incompatible
with your device.
• Do not use the Bluetooth feature for illegal purposes
(for example, pirating copies of files or illegally tapping
communications for commercial purposes). Samsung is
not responsible for the repercussion of illegal use of the
Bluetooth feature.
Device layout
NFC antenna
Charger jack
Microphone
Noise-cancelling
microphone
Headband
Ear pad
Noise-cancelling
switch
Power switch
Notification light
Touch pad
Audio cable jack
Noise-cancelling
microphone
Adjustable slider
/ Hinge

4
Package contents
Device, Pouch, USB cable, 3.5 mm audio cable, user
manual
The items supplied with the device and any
available accessories may vary depending on the
region or service provider.
Charging the battery
This device has a built-in battery. Before using the device
for the first time or when the battery has been unused for
extended periods, you must charge the battery.
Use only Samsung-approved chargers and cables.
Unapproved chargers or cables can cause the
battery to explode or damage the device.
Connect the device to a computer or the USB power
adaptor via the USB cable.
• The notification light turns red while the device is
being charged. The notification light turns green when
charging is complete.

5
• To save energy, unplug the charger when not
in use. The charger does not have a power
switch, so you must unplug the charger from
the electric socket when not in use to avoid
wasting power. The charger should remain
close to the electric socket and easily accessible
while charging.
• The socket-outlet shall be installed near the
equipment and shall be easily accessible.
Turning the device on or off
Slide the Power switch up to turn on the device.
ON OFF Pairing
mode

6
Registering the device and connecting
via the Bluetooth feature
Connecting via the NFC feature
1 Activate the NFC and Bluetooth features on the other
device.
2 Turn on the headset and place the other device’s
NFC antenna near the NFC antenna area ( ) of the
headset.
Device connection is complete after you allow the
other device to connect to your headset.
Connecting devices manually
1 Slide the Power switch to pairing mode and hold it
for 3 seconds.
The headset enters the Bluetooth pairing mode and
the notification light flashes red, green, and then blue.
2 On the Bluetooth-enabled device, activate the
Bluetooth feature and select Samsung Level On from
the detected device list.

7
• Once devices are paired, recently connected
devices automatically connect to your headset
whenever you turn it on.
• The NFC antenna area and the method for
connecting via the Bluetooth feature may differ
depending on the device. For more information,
refer to the device’s user manual.
Disconnecting from other devices
Turn off the headset or deactivate the Bluetooth feature.
Alternatively, place the connected device’s NFC antenna
near the NFC antenna area ( ) of the headset.
Removing background noise
To remove background noise, activate the noise-
cancelling feature by sliding the noise-cancelling switch
upward.
Using the touch pad
Use the touch pad on the right side of the headset to
control the connected device’s functions.

8
• Use only one finger on the touch pad. It may
not work if you use more than one finger.
• The touch pad cannot be used while the
headset is connected to another device via an
audio cable.
Function Method
Adjusting the
volume
• Drag upwards or downwards.
Playing
multimedia files
• Play or pause the file: Double-
tap.
• Play the next or previous file:
Drag forwards or backwards.
Using calling
features
• Answer or end a call: Double-tap.
• Reject a call: Tap and hold for
more than 3 seconds.
Launching S
Voice
• Tap and hold for more than
3 seconds.

9
Sharing music with other headsets
Share music that you are listening to on your headset with
other headsets of the same model.
Ensure that the headset that you want to share music with
is turned on.
Method 1 Using the Power switch
Slide the Power switch to pairing mode. Music that you
are currently listening to on your headset is shared with
other headsets of the same model.
To listen to music playing on another headset, slide the
Power switch to pairing mode twice.
Method 2 Using Samsung Level
On the connected smartphone, download the Samsung
Level application from Google Play or GALAXY Apps.
Launch the application to share music with other headsets
of the same model.
For more information, refer to the application’s help
information.
This application is compatible with Samsung
smartphones running Android operating system
4.2.2 or later. The functions may differ depending
on the smartphone or the operating system.

10
Removing the battery (non-removable
type)
These instructions are only for your service
provider or an authorised repair agent. Damage or
faults caused by the unauthorised removal of the
battery are not covered by the warranty.
1 Remove the headset’s left ear pad.
2 Loosen and remove the four screws and open the
cover.
3 Cut the two wires as shown in the image below.
4 Remove the battery.

11
Safety information
Follow the safety information to prevent injury to yourself
or others and to prevent damage to your device.
Do not touch the device with wet hands
Do not drop or cause an impact to the charger or
the device
Keep your device dry
Do not store your device in very hot or very cold
areas. It is recommended to use your device at
temperatures from 5 °C to 35 °C
Do not store your device near magnetic fields
Do not disassemble, modify, or repair your device
Do not use chemicals or detergents when cleaning
your device
Protect your hearing and ears when using a device
• Use caution to avoid long-term exposure
to loud sounds to prevent damage to your
hearing.
• Do not use a device while driving or riding.
Doing so may distract your attention
and cause an accident, or may be illegal
depending on your region.
Do not use your device in a hospital, on an aircraft,
or in an automotive equipment that can be
interfered with by radio frequency

12
Correct disposal of this product
(Waste Electrical & Electronic Equipment)
(Applicable in countries with separate
collection systems)
This marking on the product, accessories or
literature indicates that the product and its
electronic accessories (e.g. charger, headset,
USB cable) should not be disposed of with other
household waste.
To prevent possible harm to the environment or human
health from uncontrolled waste disposal, please separate
these items from other types of waste and recycle them
responsibly to promote the sustainable reuse of material
resources.
Household users should contact either the retailer where
they purchased this product, or their local government
office, for details of where and how they can take these
items for environmentally safe recycling.
Business users should contact their supplier and check
the terms and conditions of the purchase contract. This
product and its electronic accessories should not be
mixed with other commercial wastes for disposal.
This product is RoHS compliant.

13
Correct disposal of batteries in this
product
(Applicable in countries with separate
collection systems)
This marking on the battery, manual or
packaging indicates that the battery in this
product should not be disposed of with
other household waste. Where marked, the chemical
symbols Hg, Cd or Pb indicate that the battery contains
mercury, cadmium or lead above the reference levels in EC
Directive 2006/66.
The battery incorporated in this product is not user
replaceable. For information on its replacement, please
contact your service provider. Do not attempt to remove
the battery or dispose it in a fire. Do not disassemble,
crush, or puncture the battery. If you intend to discard the
product, the waste collection site will take the appropriate
measures for the recycling and treatment of the product,
including the battery.

FCC ID: A3L-EOPN900
FCC Part 15.19
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
FCC Part 15.21
Any changes or modifications (including the antennas) to this
device that are not expressly approved by the manufacturer
may void the user's authority to operate the equipment.
IC: 649E-EOPN900
This device complies with Industry Canada licence-exempt RSS
standard(s).
Operation is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device must
accept any interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes : (1)
l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur
de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le
fonctionnement.