Samsung LN26T71B User manual

Owner’s
Instructions
Register your product at www.samsung.com/global/register
LN26T71B
LN32T71B
LN40T71B
TFT-LCD TELEVISION
BN68-01001W-00
Contact SAMSUNG WORLD-WIDE
If you have any questions or co ents relating to Sa sung products,
please contact the SAMSUNG custo er care center.
Contacte con SAMSUNG WORLD-WIDE
Si tiene alguna pregunta o co entario referente a nuestros productos,
por favor contacte con nuestro Servicio de Atención al Cliente.
Country
AR ENTINE
BRAZIL
CHILE
COSTA RICA
ECUADOR
EL SALVADOR
UATEMALA
JAMAICA
MEXICO
PANAMA
PUERTO RICO
REP.DOMINICA
TRINIDAD &TOBA O
VENEZUELA
Custo er Care Center
0800-333-3733
0800-124-421
800-726-7864 (SAMSUN )
0-800-507-7267
1-800-10-7267
800-6225
1-800-299-0013
1-800-234-7267
01-800-SAMSUN (7267864)
800-7267
1-800-682-3180
1-800-751-2676
1-800-7267-864
1-800-100-5303
Web Site
www.samsung.com/ar
www.samsung.com/br
www.samsung.com/cl
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/mx
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
IMPORTADO POR:SAMSUN ELECTRONICS MÉXICO.S.A.de C.V.
Vía Lopez Portillo No.6,
Col.San Fco.Chilpan
Tultitlán,Estado de México,C.P.54940
TEL.[phone]
EXPORTADO POR:Samsung Electronics CO.,LTD.
416,Mae tan-3dong,Yeongtong -gu,
Suwon City, yeonggi-do Korea
BN68-01001W-00Cover.qxd 7/24/06 8:13 PM Page 1
All manuals and user guides at all-guides.com
all-guides.com

Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen.
• Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention.
This image retention is also known as "screen burn".
To a oid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.
• Watching the LCD TV in 4:3 format for a long period of time may lea e traces of borders displayed on the left, right and center of the screen
caused by the difference of light emission on the screen.
Playing a DVD or a game console may cause a similar effect to the screen.
Damages caused by the abo e effect are not co ered by the Warranty.
•Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.
To pre ent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.
© 2006 Samsung Electronics Co., Ltd. All rights reser ed.
Precauciones al mostrar en la pantalla una imagen fija
La imagen fija puede causar daños permanentes en la pantalla del tele isor.
•No deje una imagen fija en la pantalla LCD durante más de dos horas ya que se podría producir una retención de la imagen en la pantalla. Este fenómeno de
retención de imágenes también se denomina "quemadura de pantalla".
Para e itar que se produzca esa persistencia de la imagen, reduzca el ni el de luminosidad y de contraste de la pantalla cuando muestre imágenes fijas.
• El uso del tele isor LCD en formato 4:3 durante un tiempo prolongado puede dejar rastros de bordes en las partes izquierda,
derecha y central de la pantalla debido a las diferencias en la emisión lumínica de la pantalla.
La reproducción de un DVD o el uso de una consola de ideojuegos pueden pro ocar un efecto similar en la pantalla.
Reproducir un DVD o una ideoconsola puede causar un efecto similar en la pantalla. La garantía no cubre estos daños.
•Ver imágenes fijas de ideojuegos y PC durante más tiempo del indicado puede producir restos de imágenes parciales.
Para e itar este efecto, reduzca el 'brillo' y el 'contraste' cuando ea imágenes fijas.
MAMMI-Still(Eng).qxd 7/24/06 8:13 PM Page 1
All manuals and user guides at all-guides.com

English
Symbol Press Important Note One-Touch
Button
Contents
GENERAL INFOR ATION
List of Features .................................................................................. 2
Accessories........................................................................................ 2
Viewing the Control Panel.................................................................. 3
Viewing the Connection Panel ........................................................... 4
Remote Control .................................................................................. 6
Installing Batteries in the Remote Control .........................................
CONNECTIONS
Connecting VHF and UHF Antennas.................................................
Connecting Cable TV......................................................................... 8
Connecting a VCR ............................................................................. 9
Connecting an S-VHS VCR(LN26T 1B) ........................................... 9
Connecting a Camcorder (LN32T 1B/LN40T 1B) .............................. 10
Connecting a DVD Player.................................................................. 10
Connecting a DVD Player/Set-Top Box via DVI ................................ 10
Connecting a DVD Player/Set-Top Box via HDMI ............................. 11
Connecting an Amplifier/DVD Home Theater .................................... 11
Connecting a PC................................................................................ 12
OPERATION
Turning the TV On and Off ............................................................... 13
Plug & Play Feature........................................................................... 13
Changing Channels ........................................................................... 14
Adjusting the Volume ......................................................................... 14
Viewing the Display............................................................................ 15
Viewing the Menus............................................................................. 15
Memorizing the Channels .................................................................. 16
To Select the Source (depending on the model) ............................... 1
To Edit the Input Source Name (depending on the model) ............... 1
PICTURE CONTROL
Using Automatic Picture Settings ................................................. 18
Adjusting the Color Tone .............................................................. 19
DNIe Demo (Digital Natural Image engine).................................. 19
Changing the Screen Size............................................................ 20
Freezing the Picture ..................................................................... 21
Viewing Picture-in-Picture............................................................. 21
SOUND CONTROL
Customizing the Sound ................................................................ 23
Using Automatic Sound Settings ................................................. 23
Setting the TruSurround XT.......................................................... 23
Choosing a Multi-Channel Sound (MTS) track ............................ 24
Automatic Volume Control ............................................................ 24
Selecting the Internal Mute........................................................... 24
Listening to the Sound of the Sub (PIP) Picture .......................... 25
Resetting the Sound Settings to the Factory Defaults ................. 25
Connecting headphones............................................................... 25
CHANNEL CONTROL
Setting the Channel Manager....................................................... 26
Activating the Child Lock ............................................................. 2
Fine Tuning Analog Channels....................................................... 28
PC DISPLAY
Using Your TV as a Computer (PC) Display ................................ 29
Display Modes .............................................................................. 29
Setting up the TV with your PC .................................................... 30
TI E SETTING
Setting the Clock .......................................................................... 32
FUNCTION DESCRIPTION
Selecting a Menu Language......................................................... 34
Setting the Blue Screen Mode...................................................... 34
Setting the On/Off Melody ............................................................ 35
Digital Noise Reduction ................................................................ 35
Using the Game Mode.................................................................. 35
Viewing Closed Captions (On-Screen Text Messages) ................ 36
Using the Energy Saving Feature ................................................ 3
Using the Color system Feature................................................... 3
APPENDIX
Identifying Problems .................................................................... 38
Installing the Stand ....................................................................... 39
Disconnecting the Stand............................................................... 39
Installing the Wall Mount Kit (LN26T 1B) .................................... 40
Installing the Wall Mount Kit (LN32T 1B/LN40T 1B) .................. 41
Using the Anti-Theft Kensington Lock .......................................... 42
Specifications................................................................................ 42
English-1
BN68-01001W-00Eng.qxd 7/24/06 8:03 PM Page 1
All manuals and user guides at all-guides.com

English-2
List of Features
Adjustable picture settings that can be stored in the TV’s memory.
Automatic timer to turn the TV on and off.
A special sleep timer.
Excellent icture Quality
- DNIe technology provides life-like clear images.
SRS TruSurround XT
- SRS TruSurround XT provides a virtual Dolby surround system.
Accessories
lease make sure the following items are included with your LCD TV.
If any items are missing, contact your dealer.
M4 X L16
The items color and shape may vary depending on the model.
General Information
Remote Control & Batteries (AAA x 2) Power Cord Cover-Bottom
Stand
LN26T 1B
LN32T 1B
Screw
LN26T 1B
LN32T 1B
Owner’s Instructions Warranty Card / Registration
Card / Safety Guide Manual
(Not available in all locations)
BN68-01001W-00Eng.qxd 7/24/06 8:03 PM Page 2
All manuals and user guides at all-guides.com

English-3
Viewing the Control Panel
Buttons on the Lower-Right Part of the Panel
The buttons on the lower-right panel control your TV’s basic features, including the on-screen menu.
To use the more advanced features, you must use the remote control.
SOURCE
Toggles between all the available input sources
(TV, AV1, AV2, S-Video, Component1, Component2, PC,
HDMI).
In the on-screen menu, use this button as you would
use the ENTER button on the remote control.
26 inch model supports TV, AV, S-Video,
Component1, Component2, PC and HDMI
ENU
Press to see an on-screen menu of your TV’s features.
Press to increase or decrease the volume.
In the on-screen menu, use the buttons as you
would use the and buttons on the remote control.
Press to change channels.
In the on-screen menu, use the buttons as you
would use the and buttons on the remote control.
SPEAKERS
RE OTE CONTROL SENSOR
Aim the remote control towards this spot on the TV.
(POWER)
Press to turn the TV on and off.
POWER INDICATOR
Blinks and turns off when the power is on and lights up
in stand-by mode.
The product color and shape may vary depending on the model
BN68-01001W-00Eng.qxd 7/24/06 8:03 PM Page 3
All manuals and user guides at all-guides.com

English-4
AV IN 1
Video and audio inputs for external devices, such as a
camcorder or VCR.
S-VIDEO(LN26T71B)
Connect an S-Video signal from a camcorder or VCR.
CO PONENT IN 1, 2
Connect Component video/audio.
HD I/DVI IN / DVI IN (AUDIO R/L)
Connect to the HDMI jack of a device with an HDMI output.
Use the HDMI/DVI IN terminal for DVI connection to an external
device. You should use the DVI to HDMI cable or DVI-HDMI
adapter (DVI to HDMI) for video connection, and the
DVI IN ‘R-AUDIO-L’ terminal for audio.
- HD I/DVI IN terminal does not support PC.
- No sound connection is needed for an HDMI to HDMI
connection
ANT IN
Connect to an antenna or cable TV system.
SERVICE
Connector for service only.
AUDIO OUT (R/L)
Connect to the audio input jacks on your Amplifier/
Home theater.
PC IN
Connect to the video and audio output jacks on your PC.
HEADPHONE (LN26T71B)
Connect a set of external headphones for private listening.
POWER INPUT
Connect the supplied power cord.
KENSINGTON LOCK
The Kensington lock (optional) is a device used to
physically fix the system when used in a public place.
If you want to use a locking device, contact the dealer
where you purchased the TV.
The place of the Kensington Lock may be different depending
on its model.
Rear Panel Jacks
Use the rear panel jacks to connect A/V components that will be connected continuously, such as VCR or DVD players.
For more information on connecting equipment, see pages 7-12.
Viewing the Connection Panel
LN26T 1B
LN32T 1B/LN40T 1B
BN68-01001W-00Eng.qxd 7/24/06 8:03 PM Page 4
All manuals and user guides at all-guides.com
all-guides.com

English-5
AV IN 2
Video and audio inputs for external devices.
S-VIDEO IN 2
Video inputs for external devices with an S-Video output.
HEADPHONE
Connect a set of external headphones for private listening.
ide Panel Jacks (LN32T71B/LN40T71B)
Use the left side panel jacks to connect a component that is used only occasionally, such as a camcorder or video game. (See page 10)
BN68-01001W-00Eng.qxd 7/24/06 8:03 PM Page 5
All manuals and user guides at all-guides.com

English-6
Remote Control
You can use the remote control up to a distance of about 23 feet from the TV. When using the remote, always point it directly at the TV.
POWER
Turns the TV on and off.
NU ERIC BUTTONS
Press to change the channel.
–
Press to select channels over 100.
For example, to select channel 121,
press “ - ”, then “2”, then “1”.
CH GR
Used to display Channel Lists on the
screen.
TV
Selects the TV mode directly
VOL / VOL
Press to increase or decrease the
volume.
( UTE)
Press to temporarily cut off the sound.
ENU
Displays the main on-screen menu.
S. ODE
Press to select the sound mode.
PIP
Picture-in Picture ON/OFF.
P. ODE
Press to select the picture mode.
E.SAVING
Adjusts screen brightness to save energy.
DNIe(Digital Natural Image engine)
DNIe Demo On/Off
TS
Press to choose stereo, mono or
Separate Audio Program
(SAP broadcast).
SRS
Selects SRS TruSurround XT mode.
SOURCE
Press to display all of the available
video sources.
PRE-CH
Tunes to the previous channel.
SLEEP
Press to select a preset time interval
for automatic shut off.
PC
Selects the PC mode directly
CH / CH
Press to change channels.
EXIT
Press to exit the menu.
UP / DOWN / LEFT /
RIGHT / ENTER
Use to select on-screen menu items
and change menu values.
INFO
Press to display information on the TV
screen.
CAPTION
Controls the caption decoder.
STILL
Press to stop the action during a
particular scene.
Press again to resume normal video.
P.SIZE
Press to change the screen size.
PIP FUCTIONS
SOURCE : Press to select a signal
from an external source in PIP.
POSITION : Change the position of
the PIP screen.
CH : Displays the available channels in
sequence. (These buttons change
channels in the PIP window only.)
This is a special remote control for the visually impaired, and has Braille points on the Power,
Channel and Volume buttons.
BN68-01001W-00Eng.qxd 7/24/06 8:04 PM Page 6
All manuals and user guides at all-guides.com

English-7
1. Place the wires from the twin leads under the screws on a 300- 5 Ω adapter
(not supplied).
Use a screwdriver to tighten the screws.
2. Plug the adaptor into the ANT IN terminal on the back of the TV.
Connecting VHF and UHF Antennas
If your antenna has a set of leads that look like this, see “Antennas with 300 Ω Flat Twin Leads”
below.
If your antenna has one lead that looks like this, see “Antennas with 75
Ω Round Leads”.
If you have two antennas, see “Separate VHF and UHF Antennas”.
Antennas with 300 Ω Flat Twin Leads
If you are using an off-air antenna (such as a roof antenna or “rabbit ears”) that has 300 Ω twin flat leads, follow the directions below.
1. Plug the antenna lead into the ANT IN terminal on the back of the TV.
Antennas with 75 Ω Round Leads
1. Connect both antenna leads to the combiner.
2. Plug the combiner into the ANT IN terminal on the bottom of the rear panel.
eparate VHF and UHF Antennas
If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before connecting
the antennas to the TV. This procedure requires an optional combiner-adaptor (available at most electronics shops).
UHF
VHF
ANT IN
ANT IN
ANT IN
1. Lift the cover at the back of the remote control upward as shown in the figure.
2. Install two AAA size batteries.
Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment.
3. Replace the cover.
Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time.
The remote control can be used up to about 23 feet from the TV.
(Assuming typical TV usage, the batteries last for about one year.)
If the remote control doesn’t work, check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage, or is the power cord unplugged?
5. Is there a special fluorescent light or neon sign nearby?
Installing Batteries in the Remote Control
UHF
VHF
Connections
BN68-01001W-00Eng.qxd 7/24/06 8:04 PM Page 7
All manuals and user guides at all-guides.com

English-8
After you have made this connection, set the A/B switch to the “A” position for normal viewing. Set the A/B switch to the “B” position to view scrambled
channels. (When you set the A/B switch to “B”, you will need to tune your TV to the cable box’s output channel, which is usually channel 3 or 4.)
2. Connect this cable to a two-way splitter.
Splitter
Incoming
cable
3. Connect an RF cable between an OUTPUT
terminal on the splitter and the IN terminal
on the cable box.
Splitter
Cable Box
Incoming
cable
4. Connect an RF cable between the
ANT OUT terminal on the cable box and
the B–IN terminal on the RF(A/B) switch.
Splitter
Cable Box
RF (A/B)
Switch
Incoming
cable
5. Connect another cable between the other
OUT terminal on the splitter and the A–IN
terminal on the RF (A/B) switch.
Splitter
Cable Box
Incoming
cable
6. Connect the last RF cable between the
OUT terminal on the RF (A/B) switch and
the ANT IN terminal on the rear of the TV.
Splitter
Cable Box
Incoming
cable
Connecting to a Cable Box that Descrambles ome Channels
If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-way
splitter, an RF (A/B) switch, and four lengths of RF cable. (These items are available at most electronics stores.)
1. Find and disconnect the cable that is
connected to the ANT IN terminal on your
cable box.
This terminal might be labeled “ANT IN”,
“VHF IN” or simply, “IN”.
ANT IN
RF (A/B)
Switch
TV Rear
RF (A/B)
Switch
ANT IN
Connecting Cable TV
To connect to a cable TV system, follow the instructions below.
Cable without a Cable Box
1. Plug the incoming cable into the ANT IN terminal on the back of the TV.
Because this TV is cable-ready, you do not need a cable box to view unscrambled cable channels.
2. Connect the other end of this cable to the ANT IN terminal on the back of the TV.
Connecting to a Cable Box that Descrambles All Channels
1. Find the cable that is connected to the ANT OUT terminal on your cable box.
This terminal might be labeled “ANT OUT”, “VHF OUT” or simply, “OUT”.
ANT OUT
ANT IN
ANT IN
ANT IN
BN68-01001W-00Eng.qxd 7/24/06 8:04 PM Page 8
All manuals and user guides at all-guides.com

English-9
Connecting a VCR
These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on
pages 7-8). Skip step 1 if you have not yet connected to an antenna or a cable system.
1. Unplug the cable or antenna
from the back of the TV.
2. Connect the cable or antenna
to the ANT IN terminal on the
back of the VCR.
3. Connect an Antenna Cable
between the ANT OUT
terminal on the VCR and the
ANT IN terminal on the TV.
4. Connect a Video Cable
between the VIDEO OUT jack
on the VCR and the AV 1 IN
[VIDEO] jack on the TV.
5. Connect Audio Cables
between the AUDIO OUT
jacks on the VCR and the
AV 1 IN [R-AUDIO-L] jacks
on the TV.
If you have a “mono”
(non-stereo) VCR, use a
Y-connector (not supplied) to
hook up to the right and left
audio input jacks of the TV.
If your VCR is stereo, you
must connect two cables.
Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.
Each external input source device has a different back panel configuration.
When connecting an external device, match the color of the connection terminal to the cable.
VCR Rear Panel
TV Rear Panel
Antenna Cable (Not supplied)
Video Cable (Not supplied)
Audio Cable (Not supplied)
2
3
4
5
Connecting an -VH VCR(LN26T71B)
Your Samsung TV can be connected to an S-Video signal from an S-VHS VCR.
(This connection delivers a better picture as compared to a standard VHS VCR.)
1. To begin, follow steps 1–3
in the previous section to
connect the antenna or
cable to your VCR and
your TV.
2. Connect an S-Video Cable
between the S-VIDEO OUT
jack on the VCR and the
AV 1 IN [S-VIDEO] jack on
the TV.
3. Connect Audio Cables
between the AUDIO OUT
jacks on the VCR and the
AV 1 IN [R-AUDIO-L] jacks
on the TV.
An S-Video cable is usually included with an S-VHS VCR. (If not, check your local electronics store.)
Each external input source device has a different back panel configuration.
When connecting an external device, match the color of the connection terminal to the cable.
Some games may be displayed with a cut off picture when the TV is connected to a game player.
VCR Rear Panel
TV Rear Panel
Antenna Cable (Not supplied)
S-Video Cable (Not supplied)
Audio Cable (Not supplied)
3
2
1
ANT IN
BN68-01001W-00Eng.qxd 7/24/06 8:04 PM Page 9
All manuals and user guides at all-guides.com
all-guides.com

English-10
Connecting a DVD Player/ et-Top Box via DVI
This connection can only be made if there is a DVI Output connector on the external device.
1. Connect a DVI to HDMI
Cable or DVI-HDMI Adapter
between the HDMI/DVI IN
connector on the TV and
the DVI connector on the
DVD player/Set-Top Box.
2. Connect Audio Cables
between the DVI IN
[R-AUDIO-L] jack on the
TV and the AUDIO OUT
jacks on the DVD player/
Set-Top Box.
DVD Player / Set-Top Box
TV Rear Panel
Audio Cable (Not supplied)
2
Each external input source device has a different back panel configuration.
When connecting an external device, match the color of the connection terminal to the cable.
DVI to HD I Cable (Not supplied)
1
Connecting a Camcorder (LN32T71B/LN40T71B)
The side panel jacks on your TV make it easy to connect a camcorder to your TV.
They allow you to view the camcorder tapes without using a VCR
1. Connect a Video Cable
(or S-Video Cable )between
the AV IN2 [VIDEO]
(or S-VIDEO) jack on the
TV and the VIDEO OUT
jack on the camcorder.
Camcorder
TV Side Panel
2. Connect Audio Cables
between the AV IN2
[R-AUDIO-L] jacks on the
TV and the AUDIO OUT
jacks on the camcorder.
Audio Cable (Not supplied)
Video Cable (Not supplied)
or
S-Video Cable (Not supplied)
Connecting a DVD Player
The rear panel jacks on your TV make it easy to connect a DVD player to your TV.
1. Connect a Component
Cable between the
COMPONENT IN(1 or 2)
[Y, PB, PR] jacks on the TV
and the COMPONENT
[Y, PB, PR] jacks on the
DVD player.
2. Connect Audio Cables
between the COMPONENT
IN(1 or 2) [R-AUDIO-L]
jacks on the TV and the
AUDIO OUT jacks on the
DVD player.
DVD Player Rear Panel TV Rear Panel
Component Cable (Not supplied)
Audio Cable (Not supplied)
Component video separates the video into Y (Luminance (brightness)), PB(Blue) and PR(Red)
for enhanced video quality.
Be sure to match the component video and audio connections.
For example, if connecting the video cable to COMPONENT IN,
connect the audio cable to COMPONENT IN also.
Each external input source device has a different back panel configuration.
When connecting an external device, match the color of the connection terminal to the cable.
1
2
1
2
1
Each external input source device has a different back panel configuration.
When connecting an external device, match the color of the connection terminal to the cable.
BN68-01001W-00Eng.qxd 7/24/06 8:04 PM Page 10
All manuals and user guides at all-guides.com

English-11
Connecting a DVD Player/ et-Top Box via HDMI
This connection can only be made if there is an HDMI Output connector on the external device.
1. Connect an HDMI Cable
between the HDMI/DVI IN
connector on the TV and
the HDMI connector on the
DVD player/Set-Top Box.
DVD Player Rear Panel TV Rear Panel
HD I Cable (Not supplied)
What is HDMI?
• HDMI(High-Definition Multimedia Interface), is a next-generation interface that enables the
transmission of digital audio and video signals using a single cable without compression.
• “Multimedia interface” is a more accurate name for it especially because it allows multiple channels of
digital audio (5.1 channels).
The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP
(High Bandwidth Digital Copy Protection) coding feature installed, and supports multi-channel
digital audio.
Each external input source device has a different back panel configuration.
When connecting an external device, match the color of the connection terminal to the cable.
Connecting an Amplifier/DVD Home Theater
1. Connect Audio Cables
between the AUDIO OUT
[R-AUDIO-L] on the TV
and AUDIO IN [R-AUDIO-L]
on the Amplifier/DVD Home
Theater.
When an audio amplifier is
connected to the “AUDIO
OUT [L-AUDIO-R]”
terminals: Decrease the
gain (volume) of the TV,
and adjust the volume level
with the Amplifier’s volume
control.
Amplifier/DVD Home Theater
TV Rear Panel
Audio Cable (Not supplied)
Each external input source device has a different back panel configuration.
When connecting an external device, match the color of the connection terminal to the cable.
BN68-01001W-00Eng.qxd 7/24/06 8:04 PM Page 11
All manuals and user guides at all-guides.com

English-12
Connecting a PC
1. Connect a D-Sub Cable
between PC IN [PC]
connector on the TV and
the PC output connector
on your computer.
2. Connect a PC Audio Cable
between PC IN [AUDIO]
jack on the TV and the
Audio Out jack of the sound
card on your computer.
PC
TV Rear Panel
D-Sub Cable (Not supplied)
PC Audio Cable (Not supplied)
Each external input source device has a different back panel configuration.
When connecting an external device, match the color of the connection terminal to the cable.
The HD I/DVI jacks do not support PC connection.
1
2
Internal ute Off
Internal ute On
Video No Signal
RF
Speaker Output
Mute
Mute
Internal Speakers
AV, S-Video
Speaker Output
Mute
Mute
Component, PC, HD I
Speaker Output
Mute
Mute
RF
Sound Output
Sound Output
Mute
AV, S-Video
Sound Output
Sound Output
Mute
Component, PC, HD I
Sound Output
Sound Output
Mute
When “Internal mute” is set to “On”, Sound menus except “MTS” cannot be adjusted.
Audio Out (R/L Out)
BN68-01001W-00Eng.qxd 7/24/06 8:04 PM Page 12
All manuals and user guides at all-guides.com

English-13
Turning the TV On and Off
ress the POWER button on the remote control.
You can also use the button on the front of the panel.
Plug & Play Feature
When the TV is initially powered on, two basic customer settings proceed automatically and subsequently:
1. Press the POWER button on the remote control.
The message “Start Plug & Play” is displayed with “OK” selected.
2. Select the appropriate language by pressing the or buttons. Press the
ENTER button to confirm your choice.
3. The message “Check antenna input.” is displayed with “OK” selected. Press the
ENTER button.
4. Press the or buttons to select “Air”, “STD”, “HRC”, or “IRC”, then press
the ENTER button.
5. Press the ENTER button to select “Start”. The TV will begin memorizing
all of the available channels.
To stop the search before it has finished, press the ENTER button with “Stop”
selected.
6. Press the ENTER button. Press the or buttons to move to the
“Hour”, “Minute” or “am/pm”. Set the “Hour”, “Minute” or “am/pm” by pressing the
or buttons. Press the ENTER button.
(Refer to “Setting the Clock”on page 32.)
You can set the Hour and Minute directly by pressing the number buttons on the
remote control.
7. The message “Enjoy your watching.” is displayed.
When you have finished, press the ENTER button.
Operation
BN68-01001W-00Eng.qxd 7/24/06 8:04 PM Page 13
All manuals and user guides at all-guides.com

English-14
Changing Channels
1. Press the CH or CH button to change channels.
When you press the CH or CH button, the TV changes channels in sequence.
You will see all the channels that the TV has memorized. (The TV must have memorized
at least three channels). You will not see channels that were either erased or not
memorized. See page 16 to memorize channels.
If you want to reset this feature...
1. Press the ENU button to display the menu.
Press the or button to select “Setup”, then press the ENTER button.
2. Press the ENTER button again, to select “Plug & Play”.
3. The message “Start Plug & Play” is displayed.
If you wish more details on the options of the setup, refer to the previous page.
Plug & Play can only be accessed in the TV mode.
Using the Channel Buttons
1. Press the PRE-CH button.
The TV will switch to the last channel viewed.
To quickly switch between two channels that are far apart, tune to one channel, then use
the number button to select the second channel. Then use the PRE-CH button to quickly
alternate between them.
Using the PRE-CH Button to select the Previous Channel
Adjusting the Volume
1. Press the VOL or VOL buttons to increase or decrease the volume.
1. Press UTE button and the sound cuts off.
The word “ ” will appear in the lower-left corner of the screen.
2. To turn mute off, press the UTE button again, or simply press the
VOL or VOL buttons.
Using Mute
At any time, you can cut off the sound using the MUTE button.
BN68-01001W-00Eng.qxd 7/24/06 8:04 PM Page 14
All manuals and user guides at all-guides.com
all-guides.com

English-15
Viewing the Menus
1. With the power on, press the ENU button.
The main menu appears on the screen. Its left side has five icons:
Input, Picture, Sound, Channel, Setup.
2. Use the or buttons to select one of the five icons.
Then press the ENTER button to access the icon’s sub-menu.
3. Press the EXIT button to exit.
The on-screen menus disappear from the screen after about two minutes.
Viewing the Display
1. Press the INFO button on the remote control.
The TV will display the channel, the type of sound,
and the status of certain picture and sound settings.
CAPTION
The display identifies the current channel and the status of certain audio-video settings.
Press the INFO button once more or wait approximately 10 seconds and it disappears
automatically.
BN68-01001W-00Eng.qxd 7/24/06 8:04 PM Page 15
All manuals and user guides at all-guides.com

English-16
Memorizing the Channels
Your TV can memorize and store all of the available channels for both “off-air” (antenna) and “cable” channels. After the available chan-
nels are memorized, use the CH or CH buttons to scan through the channels. This eliminates the need to change channels by entering
the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and
adding and deleting channels (manual).
electing the Video ignal-source
Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the
TV (i.e. an antenna or a cable system).
1. Press the ENU button to display the menu.
Press the or buttons to select “Channel”, then press the
ENTER button.
2. Press the ENTER button. Repeatedly press the or buttons to cycle
through these choices: “Air”, “STD”, “HRC”, or “IRC” (all cable TV).
Press the EXIT button to exit.
STD, HRC and IRC identify various types of cable TV systems.
Contact your local cable company to identify the type of cable system that exists in
your particular area.
At this point, the signal source has been selected. Proceed to “Storing Channels
Automatically”.
toring Channels in Memory (Automatic Method)
1. First, select the correct signal source (Air, STD, HRC, or IRC).
2. Press the or buttons to select “Auto Program”, then press the ENTER button.
3. Press the ENTER button to select “Start”.
The TV will begin memorizing all of the available channels.
The TV automatically cycles through all of the available channels and stores them in
memory. This takes about one to two minutes. Press the
ENTER
button at any time to
interrupt the memorization process and return to the “Channel” menu.
4. After all the available channels are stored, the
“Channel” menu reappears. Press the EXIT button to exit.
To stop the search before it has finished, press the ENTER button with “Stop” selected.
BN68-01001W-00Eng.qxd 7/24/06 8:04 PM Page 16
All manuals and user guides at all-guides.com

English-17
To elect the ource (depending on the model)
Press the SOURCE button on the remote control to view an external signal source.
You can enter TV or PC mode directly by using the TV or PC button on the remote control.
To Edit the Input ource Name (depending on the model)
Name the device connected to the input jacks to make your input source selection easier.
1. Press the ENU button to display the menu.
Press the ENTER button to select “Input”.
Press the or buttons to select “Edit Name”, then press the ENTER button.
2. Press the or buttons to select “AV1”, “AV2”, “S-Video”, “Component1”,
“Component2”, “PC” or “HDMI” input jack, then press the ENTER button.
26 inch model only supports TV, AV, S-Video, Component1, Component2, PC and HDMI.
3. Press the or buttons to select “VCR”, “DVD”, “D-VHS”, “Cable STB”,
“HD STB”, “Satellite STB”, “AV Receiver”, “DVD Receiver”, “Game”,
“Camcorder”, “DVD Combo”, “DHR” or “PC” input source,
then press the ENTER button.
Press the EXIT button to exit.
Use to select TV or other external input sources connected to the TV.
Use to select the input source of your choice.
1. Press the ENU button to display the menu.
Press the ENTER button to select “Input”.
2. Press the ENTER button to select “Source List”.
Press the or buttons to select signal source, then press the ENTER button.
When you connect equipment to the LCD, you can choose between the following sets of
jacks: AV1, Component1, Component2, PC or HDMI on the TV’s rear panel and AV2,
S-Video on the TV’s side panel.
HDMI input can only be selected when the external device is turned on and
connected via HDMI.
26 inch model only supports TV, AV, S-Video, Component1, Component2, PC and HDMI.
You can choose only those external devices that are connected to the TV.
BN68-01001W-00Eng.qxd 7/24/06 8:04 PM Page 17
All manuals and user guides at all-guides.com

English-18
Using Automatic Picture ettings
Your TV has four automatic picture settings (“Dynamic”, “Standard”, “Movie”, and “Custom”) that are preset at the factory.
You can activate either Dynamic, Standard, Movie, or Custom by making a selection from the menu.
Or, you can select “Custom” which automatically recalls your personalized picture settings.
1. Press the ENU button to display the menu.
Press the or buttons to select “Picture”, then press the ENTER button.
2. Press the ENTER button to select “Mode”.
Press the ENTER button again.
Press the or buttons to select the “Dynamic”, “Standard”, “Movie”,
or “Custom” picture setting. Press the ENTER button.
When in PC mode, Tint, Sharpness are not available.
3. Press the or buttons to select “Contrast”, “Brightness”, “Sharpness”,
“Color”, or “Tint”, then press the ENTER button.
4. Press the or buttons to decrease or increase the value of a particular item.
For example, if you select “Contrast”, pressing the button increases it.
Press the ENTER button.
Press the EXIT button to exit.
• “Tint” doesn’t operate in HDMI, PC or any Component mode.
• Each adjusted setting will be stored separately according to its input mode.
• When you make changes to Contrast, Brightness, Sharpness, Color, Tint , OSD will be
also adjusted accordingly.
Choose Dynamic to increase the clarity and sharpness of the picture.
Choose Standard for the standard factory settings.
Choose ovie when watching movies.
Choose Custom if you want to adjust the settings according to personal preference.
Picture Control
BN68-01001W-00Eng.qxd 7/24/06 8:04 PM Page 18
All manuals and user guides at all-guides.com