Samsung SPH-110C User manual

IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings, Install in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/ accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified
by the manufacturer, or sold with the apparatus. When a cart is
used, use caution when moving the cart/apparatus combination
to avoid injury from tip-over.
13. Unplug this apparatus during lighting storms or when unused for
long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT
ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR
OTHER OPENNINGS ON THE EQUIPMENT.
Apparatus shall not be exposed to dripping or splashing and that no
objects filled with liquids, such as vases, shall be placed on the apparatus.
To prevent injury, this apparatus must be securely attached to the Wall/
ceiling in accordance with the installation instructions.
CAUTION
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
HD-SDI to HDMI Converter
User Manual SPH-110C
Product Features
The product converts the video source of the HD-SDI camera in resolutions of 1080p(1920x1080)
or 720p(1280x720) to the corresponding HDMI resolutions (HDMI 720p or 1080p) before displaying
the video source.
What’s Included
Check if the main unit and all the following accessories are included in the product package.
Appearance Item Name Quantity
HD-SDI to HDMI Converter 1
User Manual 1
Warranty Card 1
Recommended Cables
y
4C-FB(T), 4C-HFB(T), L-4CFB
y
5C-FB(T), 5C-HFB(T), L-5CFB, RG6
y
L-4.5CHD, L-6CHD : HD-SDI specific cable
EXPLANATION OF GRAPHICAL SYMBOLS
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of “dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the product.
Disconnection Device
Disconnect the main plug from the apparatus, if it’s defected. And please
call a repair man in your location.
When used outside of the U.S., it may be used HAR code with
fittings of an approved agency is employed.
CAUTION
These servicing instructions are for use by qualified service personnel only.
To reduce the risk of electric shock do not perform any servicing other than
that contained in the operating instructions unless you are qualified to do so.
SALES NETWORK
SAMSUNG TECHWIN CO., LTD.
Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400
TEL : [phone]~60 FAX : [phone]
SAMSUNG TECHWIN AMERICA Inc.
100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660
Toll Free : [phone] Direct : [phone]
Fax : [phone]
www.samsungcctvusa.com
SAMSUNG TECHWIN EUROPE LTD.
Samsung House, 1000 Hillswood Drive, Hillswood Business
Park Chertsey, Surrey, UNITED KINGDOM KT16 OPS
TEL : [phone] FAX : [phone]
www.samsungtechwin.com
www.samsungsecurity.com
AM10-000627A
AM10-000627A

Troubleshooting
y
If nothing is displayed on the screen
-Check if the power source is properly connected and applied.
-Check if the video signal line is properly connected.
-Check if the converter-connected monitor supports the resolution of the output source.
Specifications
Item Description
Video(BNC)
Input 1CH(HD-SDI SMPTE 292M)
Resolution
720p(25/30/50/60Hz)
1080p(25/30Hz)
1080i(50/60Hz)
Video(HDMI) Output 1CH(HDMI)
Resolution
1080p60, 1080p60RB, 1080i60, 720p60 Selectable by MODE switch
Audio Input(BNC) / Output(HDMI) Embedded 2ch(Left, Right)
Interface
Switch Mode Switch 4 Piano Switch for Output Resolution
LED Power RED LED
Link GREEN LED
General
Electrical Input Voltage/Current 12 VDC
Power consumption Max 4W
Environmental
Operating Temperature/Humidity +0°C to +50°C (+32°F to +122°F)/ 20%RH to 85%RH
Dimension (W x H x D) 64.3 X 26 X 111.7mm
Weight 135g
Lauguage English
Dimension
Connecting to an external device
Connecting to a camera
Connect the output port of the HD-SDI camera or other HD-SDI compliant device to the
HD-SDI input port of the converter.
You must connect the adaptor to the converter before connecting the power cable to the adaptor.
Otherwise, if you connect the power cable first, this may cause an electric shock or damage
to the product.
The converter has its polarity. Connect the adaptor to the converter in the right polarity.
Otherwise, it may cause damage to the product.
Connecting to the monitor
Connect the HDMI output signal to the HDMI monitor.
Specify the output type for the incoming video source.
57.3 64.3
5
111.7
95.516.2
50.3
26
J
`
The transfer distance of a cable may differ at the attenuation rate of 750MHz. (An attenuation rate
of dB/100m < 25dB is recommended.)
`
It is recommended to use foaming or high-density foaming insulation.
`
The dual- or triple-shield cable is recommended.
`
For the recommended cable specifications, refer to KSC-3617 and RG6 for domestic
specification (5C-FBT).
`
The maximum transfer distance of the HD-SDI signal is subject to change depending on the cable
manufacturer and your network environment.
Product At a Glance
Front & Rear View
Item Description
a
SDI Video Input Port Video input port of the HD-SDI camera supporting the resolutions of 720p
and 1080p.
b
Status Indicator Red Indicator : When the power is applied, it turns on.
Green Indicator : When the video source is input, it turns on.
c
Power In Connect DC 12V as main power.
d
Mode Switch Used if you want to change the resolution of the video source, or if you want
to display the OSD menu or color bar.
e
HDMI OUT Output the incoming video source via the HDMI port.
ca b d e
Menu Structure
Input
8 types of input source are supported.
30Hz/60Hz 25Hz/50Hz
1920x1080p30 1920x1080p25
1920x1080i60 1920x1080i50
1280x720p60 1280x720p50
1280x720p30 1280x720p25
Output
Mode Switch
Description
1234
OFF OFF x x Output the video at 1080p@60Hz.
ON OFF x x Output the video in the 1080p@60Hz CVT-RB mode.
OFF ON x x Output the video at 1080i@60Hz.
ON ON x x Output the video at 720p@60Hz.
x x ON x Include the OSD information in the output video.
(Video input information, etc)
x x x ON Include the test video of the color bar in the output video.
SEOIL SEOIL
HD-SDI POWER
C-Video
GND
AC 24V
DC 12V
1: GND 4: RS-485+
2: EXT_D/N 5 : RS-485-
3: MD_OUT
1 2 3 4 5
ON HDMI
ON
SPH-110C 뒤
Output
Resolution
Color bar
ON/OFF
OSD ON/OFF
Samsung Techwin cares for the environment at all product manufacturing stages, and is taking measures to
provide customers with more environmentally friendly products.
The Eco mark represents Samsung Techwin’s devotion to creating environmentally friendly products, and
indicates that the product satisfies the EU RoHS Directive.
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories
(e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their
working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal,
please separate these items from other types of waste and recycle them responsibly to promote the sustainable
reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local
government office, for details of where and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract.
This product and its electronic accessories should not be mixed with other commercial wastes for disposal.