Samsung PPM63H3 User manual

1
ENG
Installing the Display Vertically
You can install the PDP vertically. (PPM42S3Q/50H3Q/63H3Q
models are available. Other manufacturers do not guarantee a
reliably working.) In this case, the fan automatically works. If you
wish to stop the fan, position the PDP horizontally and then set
“Selectable Fan” to “Off” in the “Function” menu.
Please use the wall attachment panel exclusively when installing
vertically. And you have to put left side of the PDP on top when
viewed from front.
Before Using the Video Wall and the Multiple Display Control function
Example for Multiple Display Control connections
1Please create ID for each PDP before installing
them close together. It may be difficult to create
IDs when operating the remote control for PDPs
that are installed close to each other.
2For details about Video Wall configuration and
operation, refer to “Setting the Multiple Screen”
on page 27.
➢◆Press the MDC button on the remote control.
Select ID input on the menu. Use the numeric
buttons to enter the ID for PDP adjustment.
You can operate the remote control only for
the PDP that has been selected.
◆For details about Multiple Display Control, refer
to “Setting the MDC (Multiple Display Control)”
on page 25 and the Help section in MDC
program CD.
◆The PPM42S3Q model uses the same MDC
program CD used for PPM42S3 model.
The PPM50H3Q/63H3Q models use the
same MDC program CD used for
PPM50H3/63H3 models.
Example for 2x2 Video Wall function
Example for 2x2 Video Wall connections
Rear of the PDP Rear of the PDP
①
①
②
②
BN68-00654A-01Eng 4/19/04 4:13 PM Page 12

2
ENG
Connecting to the Audio/Video Input
The "VIDEO IN" connectors are used for the equipment with an Composite Video output, such as
video game devices or video disc players.
Rear of the PDP
(Input)
VCR
Decoder /
Video game device
Video disc player
Satellite receiver
DVD
①
②
Camcorder
Rear of the PDP
(Output)
The "VIDEO OUT" connectors are used for the equipment with an
Composite Video input, such as a camcorder or VCR.
① If you have a second VCR and wish to copy cassettes tape, connect the source VCR to “VIDEO IN” and
the target VCR to
“VIDEO OUT” so that you can redirect the signal from “VIDEO IN” to “VIDEO OUT” .
② When you wish to record a programme, connect the receiver to “VIDEO IN” and the VCR to “VIDEO
OUT”
so that you can redirect the signal from “VIDEO IN” to “VIDEO OUT” .
☛Whenever you connect an audio or video system to your
PDP, ensure that all elements are switched off.
Refer to the documentation supplied with your equipment
for detailed connection instructions and associated safety
precautions.
BN68-00654A-01Eng 4/19/04 4:13 PM Page 35

3
ENG
Connecting to the S-Video Input
The S-VIDEO and RCA (AUDIO-L/R) connectors are used for equipment with an S-Video output,
such as a camcorder or VCR.
Rear of the PDP
Camcorder
VCR
① To play picture and sound, both the S-VIDEO and RCA connectors must be used.
and
①
Connecting to the DVD/DTV RECEIVER Input
The “COMPONENT1 IN” (or “R(Pr)/G(Y)/B(Pb)” (video) and “AUDIO”) connectors are used for
equipment with a DVD/ DTV RECEIVER output. (480i, 480p, 720p, 1080i)
Pr / Y / Pb
and
Rear of the PDP
or
Y / Pb / Pr
L / R
or
Digital Set-Top Box
DVD
BN68-00654A-01Eng 4/19/04 4:13 PM Page 36

4
ENG
Connecting to the RGB(PC) Input
Connecting to the DVI Input
The “DVI IN” (video) and “AUDIO” connectors are used for equipment with a DVI output.
Personal Computer
and
Rear of the PDP
The “RGB1(PC1) IN” (or “R(Pr)/G(Y)/B(Pb)/H/V”) and “AUDIO”
connectors are used for interfacing with your PC.
Personal Computer
Rear of the PDP
or
BN68-00654A-01Eng 4/19/04 4:13 PM Page 37