Samsung HW-C500 User manual

AV Receiver System
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
www.samsung.com/register
HW-C500
HW-C560S
HW-C500-C560S-XAC_0309.indd 1HW-C500-C560S-XAC_0309.indd 1 2010-03-09  5:31:172010-03-09  5:31:17

2
Safety information
SAFETY WARNINGS
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates “dangerous voltage”
inside the product that presents a risk of
electric shock or personal injury.
This symbol indicates important instructions
accompanying the product.
Note to CATV system installer
This reminder is provided to call the CATV system installer’s attention to Section 820~40 of the NEC which
provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to
the grounding system of the building, as close to the point of cable entry as practical.
WARNING
To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
CAUTION
Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be
placed on the apparatus.
HW-C500-C560S-XAC_0309.indd 2HW-C500-C560S-XAC_0309.indd 2 2010-03-09  5:31:322010-03-09  5:31:32

3
ENG
PRECAUTIONS
Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install
your player horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4inches). Make sure
the ventilation slots are not covered. Do not stack anything on top of the amplifier. In order to disconnect the player completely
from the power supply, remove the AC plug from the wall outlet, especially when left unused for a long period of time.
Protect the player from moisture(i.e.vases), and excess
heat(e.g.fireplace) or equipment creating strong magnetic
or electric fields (i.e.speakers...). Disconnect the power
cable from the AC supply if the player malfunctions. Your
player is not intended for industrial use.
Use of this product is for personal use only.
Condensation may occur if your player or disc have been
stored in cold temperatures.
If transporting the player during the winter, wait
approximately 2 hours until the unit has reached room
temperature before using.
During thunderstorms, disconnect the AC plug from the
wall outlet.
Voltage peaks due to lightning could damage the unit.
Do not expose the unit to direct sunlight or other heat
sources.
This could lead to overheating and malfunction of
the unit.
The batteries used with this product contain
chemicals that are harmful to the environment.
Do not dispose of batteries in the general household
trash.
3.9 inches
3.9 inches
3.9 inches
2.7 inches
INPUT SELECT ENTER
SETUP
TONECONTRO L
SOUND EFFECT
ASC MIC ASC AUDIO
ASSIGN S. DIRECT MULTICH INPUT
AV
SYNC
TUNING
MODE SELECT MEMORY
INPUTSELECT ENTER
SETUP
TONECONTROL
SOUNDEFFECT
ASCMIC ASC AUDIO
ASSIGN S.DIRECT MULTICH
INPUT
AV
SYNC
TUNING
MODE SELECT MEMORY
INPUTSELECT ENTER
SETUP
TONECONTROL
SOUNDEFFECT
ASCMIC ASC AUDIO
ASSIGN S.DIRECT MULTICH
INPUT
AV
SYNC
TUNING
MODE SELECT MEMORY
INPUTSELECT ENTER
SETUP
TONECONTROL
SOUNDEFFECT
ASC AUDIO
ASSIGN S.DIRECT MULTICH INPUT
AV
SYNC
TUNING
MODE SELECT MEMORY
ASCMIC
Phones
HW-C500-C560S-XAC_0309.indd 3HW-C500-C560S-XAC_0309.indd 3 2010-03-09  5:31:322010-03-09  5:31:32

4
Digital AV Receiver
This product is a pure digital AV receiver that performs
digital signal processing to minimize signal distortion and
loss.
Dolby Pro Logic II
DPL II processes any high quality stereo signal source
into five separate full frequency channels.
DTS 96/24
DTS 96/24 encodes standard 16 bit/44.1 kHz sound to
24 bit/96kHz and applies it to a 5.1 CH sound track.
DTS (Digital Theater Systems)
DTS provides a discrete 5.1 CH digital audio signal for
both music and movie contents and uses less
compression than Dolby Digital for richer sound.
iPod
You can enjoy music files by connecting your iPod/iPhone
to the AV Receiver with the supplied iPod dock.
SFE (Sound Field Effect) Using
32bit Audio Digital Signal
Processing
Provides more realistic surround sound with normal
stereo audio sources.
Anynet+ (HDMI-CEC) Function
Anynet+ is a function that can be used to operate this
AV Receiver with a Samsung TV remote control, by
connecting the receiver to a SAMSUNG TV using an
HDMI Cable. (This function is available only in
connection with Samsung TV and DVD player
supporting Anynet+(HDMI-CEC).)
Features
ACCESSORIES
INPUTSELECT
TVSOURCE
POWER
AMP/TV DIMMER
SLEEP
PROLOGIC AUDIOASSIGN
BD/DVD
TUNERMEMORY SUBWOOFER MO/ST
MUTE
ASC
iPod
VOL TUNING
/CH
SETUP/MENU
RETURN EXIT
INFO
TVBD/DVD SAT
MULTICH AUX
CD
DSP
123
456
78
0
9
Remote Control/
Batteries (AAA size) FM antenna User’s manual iPod Dock ASC microphone
HW-C500-C560S-XAC_0309.indd 4HW-C500-C560S-XAC_0309.indd 4 2010-03-09  5:31:362010-03-09  5:31:36

5
ENG ●CONTENTS
SAFETY INFORMATION
2
2 Safety Warnings
3 Precautions
FEATURES
4
4 Accessories
DESCRIPTION
7
7 Front Panel
8 Rear Panel
10 Display
11 Insert Remote Control Batteries
11 Operation Range of the Remote Control
12 Tour of the Remote Control
CONNECTIONS
14
14 Speaker Positioning
16 Connecting the Speakers
18 Connecting External Devices/Your TV via
HDMI
19 HDMI Function
20 Connecting to your TV
21 Connecting a DVD or BD(Blu-ray) Player
22 Connecting a Cable, Satellite or Set-top Box
23 Connecting a CD Player
24 Connecting 5.1 Channel Devices
25 Connecting an iPod
26 Connecting the FM Antenna
BASIC FUNCTIONS OF YOUR AV
RECEIVER
27
27 Before Using the AV Receiver
27 Audio Setup
28 Selecting Digital/Analog Input
Contents
HW-C500-C560S-XAC_0309.indd 5HW-C500-C560S-XAC_0309.indd 5 2010-03-09  5:39:582010-03-09  5:39:58

6
Contents
SETUP
29
29 Setup Menu Tree
33 Setting the Speaker Size
34 Setting the Speaker Listening Distance
35 Setting the Speaker Level
36 Setting the Test Tone
37 Setting Dolby Pro Logic II Mode
37 Setting Dolby Pro Logic II
38 Setting Tone Control
39 AV SYNC
39 MP3 Enhancer
39 Smart Volume
40 ASC (Auto Sound Calibration) Setup
41 DRC Setup
41 HDMI Setup
41 Variable Set
OPERATION
42
42 Using the Surround Modes
43 Using the Subwoofer Selection Button
44 Listening to the Radio
45 Using an iPod
47 Convenient Functions
48 Software Upgrade
MISCELLANEOUS
49
49 Operating Your TV With the Remote Control
51 Operating your DVD or BD player with the
remote control
TROUBLESHOOTING
52
52 Troubleshooting
APPENDIX
54
54 Specifications
HW-C500-C560S-XAC_0309.indd 6HW-C500-C560S-XAC_0309.indd 6 2010-03-09  5:40:132010-03-09  5:40:13

7
ENG ●DESCRIPTION
FRONT PANEL
1
INPUT SELECT Used to select a source. (FM BD/DVD SAT TV CD AUX 5.1 MULTI CH 
IPOD AUDIO IPOD VIDEO).
2
UP(,), DOWN(.), LEFT(<),
RIGHT(>), ENTER
Used to move the cursor up, down, left or right and select an item in the SETUP menu.
Also used to select detailed options in the SOUND EFFECT mode and to change the tone level.
3
SETUP Displays the SETUP menu.
4
TONE CONTROL
Used to set the bass, treble level and tone to on/off.
5
SOUND EFFECT Toggles to select a surround sound mode.
6
DISPLAY Displays the speaker/audio input status, listening mode, etc
7
VOLUME CONTROL Adjusts the volume level.
8
POWER Turns the receiver on/off.
9
ASC MIC JACK Used to connect the ASC MIC for setting up ASC (Auto Sound Calibration).
10
ASC BUTTON Used to select the ASC(Auto Sound Calibration) mode.
11
AUDIO ASSIGN BUTTON Toggles to select an input mode for the selected source.
12
S.DIRECT/STEREO BUTTON Used to select the S.DIRECT or STEREO mode.
13
MULTI CH INPUT BUTTON Used to select a connected 5.1 multi channel player.
14
AV SYNC BUTTON Used to select the Audio Delay Mode.
15
TUNING MODE BUTTON
Used to select the Manual or Preset mode for FM radio.
16
SELECT BUTTON Used to change the radio frequency.
17
MEMORY BUTTON Used to set a preset radio frequency.
INPUT SELECT ENTER
SETUP
TONE CONTROL
SOUND EFFECT
ASC MIC ASC AUDIO
ASSIGN
S. DIRECT
/STEREO
MULTI CH
INPUT
AV
SYNC
TUNING
MODE SELECT MEMORY
12 3 4 5 7 8
9 10 11 12 13 14 15 1716
6
Description
HW-C500-C560S-XAC_0309.indd 7HW-C500-C560S-XAC_0309.indd 7 2010-03-09  5:31:372010-03-09  5:31:37

8
Description
REAR PANEL
iPod
1 2 4 5 6
10 11 12
3 7
13 14 158 9
iPod
1 2 4 5 6
10 11 12
3 7
13 14 158 9
< HW-C560S >
< HW-C500 >
* All those pictures of the Rear panel are based on Model HW-C560S.
HW-C500-C560S-XAC_0309.indd 8HW-C500-C560S-XAC_0309.indd 8 2010-03-09  5:31:382010-03-09  5:31:38

9
ENG ●DESCRIPTION
1
FM ANTENNA JACK Connect the FM Antenna here.
2
MULTI CH IN JACKS
Receives the analog audio signal from an external player with a multi-channel port.
3
VIDEO IN JACKS Receives the video signal from a video player (BD/DVD, SAT, TV).
4
HDMI IN JACKS
Receives digital video and audio signals simultaneously using an HDMI cable.
5
HDMI OUT JACK Outputs digital video and audio signals simultaneously using an HDMI cable.
6USB PORT
Can be only used for firmware upgrades.
7
VIDEO OUT JACK Outputs the video signal to video devices (TV, Projector etc).
8
COMPONENT VIDEO IN JACKS Receives the component video signal.
9
COMPONENT VIDEO OUT JACKS Outputs the component video signal.
10
iPod JACK Receives the audio/video signal from an iPod.
11
OPTICAL IN JACKS (DIGITAL AUDIO IN)
Receives the digital optical audio signal.
12
COAXIAL IN JACK (DIGITAL AUDIO IN)
Receives the digital coaxial audio signal.
13
AUDIO IN JACKS Receives the audio signal from a video player (BD/DVD, SAT, TV, CD).
14
SUBWOOFER AUDIO OUT JACK Connect the subwoofer.
15
SPEAKER OUT TERMINALS
Speaker connection terminals.
HW-C500-C560S-XAC_0309.indd 9HW-C500-C560S-XAC_0309.indd 9 2010-03-09  5:31:402010-03-09  5:31:40

10
Description
DISPLAY
1
SPEAKER INDICATORS Displays the connected speakers.
2
LISTENING MODE INDICATORS Displays the current listening mode.
3
TUNING INDICATORS Displays the status of the current radio broadcast.
4
AUDIO INPUT INDICATORS Displays the audio input signal type of the currently connected external audio source.
5
SPEAKER LEVEL INDICATOR Displays the speaker level.
6
RADIO FREQUENCY INDICATORS
Displays the current radio frequency range.
7
MESSAGE DISPLAY Informs you of the status of the receiver.
1 2 3 4
67
5
HW-C500-C560S-XAC_0309.indd 10HW-C500-C560S-XAC_0309.indd 10 2010-03-09  5:31:402010-03-09  5:31:40

11
ENG ●DESCRIPTION
INSERT REMOTE CONTROL BATTERIES
* Battery size: AAA
Follow these precautions to avoid leaking or cracking cells:
Place batteries in the remote control so they match the polarity : (+) to (+) and (–) to (–).
Assuming typical TV usage, the batteries last for about one year.
Use the correct type of batteries. Batteries that look similar may differ in voltage.
Always replace both batteries at the same time.
Do not expose the batteries to heat or a flame.
OPERATION RANGE OF THE REMOTE CONTROL
The remote control can be used up to approximately 23 feet/7 meters in a straight line. It can also be operated at a
horizontal angle of up to 30° from the remote control sensor.
M





INPUT SELECT ENTER
SETUP
TONE CONTROL
SOUND EFFECT
ASC MIC ASC AUDIO
ASSIGN
S. DIRECT
/STEREO
MULTI CH
INPUT
AV
SYNC
TUNING
MODE SELECT MEMORY
INPUT SELECT
TV SOURCE
POWER
AMP/TV DIMMER
SLEEP
PROLOGIC AUDIO ASSIGN
BD/DVD
TUNER MEMORY SUBWOOFER MO/ST
MUTE
ASC
iPod
VOL TUNING
/CH
SETUP/MENU
RETURN EXIT
INFO
TVBD/DVD SAT
MULTI CH AUX
CD
DSP
1 2 3
456
78
0
9
HW-C500-C560S-XAC_0309.indd 11HW-C500-C560S-XAC_0309.indd 11 2010-03-09  5:31:402010-03-09  5:31:40

12
Description
TOUR OF THE REMOTE CONTROL
INPUT SELECT
TV SOURCE
POWER
AMP/TV DIMMER
SLEEP
PROLOGIC AUDIO ASSIGN
BD/DVD
TUNER MEMORY SUBWOOFER MO/ST
MUTE
ASC
iPod
VOL TUNING
/CH
SETUP/MENU
RETURN EXIT
INFO
TVBD/DVD SAT
MULTI CH AUX
CD
DSP
1 2 3
456
78
0
9
1
2
3
4
5
6
7
8
9
10
11
12
13
15
16
17
20
21
22
23
24
25
26
28
27
14
18
19
HW-C500-C560S-XAC_0309.indd 12HW-C500-C560S-XAC_0309.indd 12 2010-03-09  5:31:412010-03-09  5:31:41

13
ENG ●DESCRIPTION
1
POWER BUTTON Turns the receiver on/off.
2
AMP/TV BUTTON
Used to select the AMP/TV mode.
- If you select the AMP mode, the button will flash orange.
- If you select the TV mode, the button will flash green.
3
NUMBER BUTTONS Used to select a TV channel.
4
PROLOGIC BUTTON Select the desired Dolby Pro Logic II audio mode.
5
SKIP BUTTONS Press to skip backwards or forwards on a connected DVD/BD player or iPod.
6
STOP/PLAY BUTTON Press to stop/start playback on a connected DVD/BD player or iPod.
7
MUTE BUTTON Mutes the sound of a connected device.
8
VOLUME CONTROL BUTTONS
Adjusts the volume of the selected device.
9
SUBWOOFER BUTTON Used to select the Subwoofer.
10
TUNER MEMORY BUTTON Used to set a preset radio frequency.
11
SETUP/MENU BUTTON Displays the SETUP menu.
12
UP/DOWN/LEFT/RIGHT BUTTONS Used to navigate the menus.
13
RETURN BUTTON Used to return to the previous menu from the SETUP menu.
14
FUNCTION SELECTOR BUTTONS Used to select an input source.
15
INPUT SELECT,
TV SOURCE BUTTON
Toggles to find and select an input source.
Press to select a connected TV's video source.
16
DIMMER BUTTON Adjusts the brightness of the display.
17
BD/DVD BUTTON
Used to select the BD/DVD mode.
- If you select the BD mode, the button will flash orange.
- If you select the DVD mode, the button will flash green.
18
SLEEP BUTTON Used to set the Sleep Timer.
19
AUDIO ASSIGN BUTTON Toggles to select an input mode for the selected source.
20
DSP BUTTON Used to select the SFE mode.
21
SEARCH BUTTONS Press to search backwards or forwards.
22
PAUSE BUTTON Pauses playback on a connected device.
23
TUNING/CHANNEL BUTTONS Used to change the radio broadcasting frequency or TV channel.
24
ASC BUTTON Used to set the Auto Sound Calibration function.
25
MO/ST BUTTON Select MONO or STEREO for radio broadcasts.
26
INFO BUTTON Display information on the connected device currently being used.
27
ENTER BUTTON Used to select an item in the SETUP menu.
28
EXIT BUTTON Exits the SETUP menu.
HW-C500-C560S-XAC_0309.indd 13HW-C500-C560S-XAC_0309.indd 13 2010-03-09  5:31:412010-03-09  5:31:41

14
Connections
SPEAKER POSITIONING
* The HW-C500 model does not supply speakers (sold separately).
Position of AV Receiver
Place the AV Receiver on a dedicated stand or rack.
Subwoofer
The position of the subwoofer is not so critical. Place it anywhere you like.
Front Speakers
Place these speakers in front of your listening position, facing inwards (about 45°) toward you.
Place the speakers so that their tweeters will be at the same height as your ears.
Align the front face of the front speakers with the front face of the center speaker or place them slightly
in front of the center speaker.
SL SR
6.6~9.8 feet (2~3m)
INPUTSELECT ENTER
SETUP
TONECONTROL
SOUNDEFFECT
ASCMIC ASC AUDIO
ASSIGN
S.DIRECT
/STEREO
MULTICH
INPUT
AV
SYNC
TUNING
MODE SELECT MEMORY
This section involves various methods of connecting the AV receiver to other
external components.
Before moving or installing the product, be sure to turn off the power and
disconnect the power cord.
AV
RECEIVER
HW-C500-C560S-XAC_0309.indd 14HW-C500-C560S-XAC_0309.indd 14 2010-03-09  5:31:412010-03-09  5:31:41

15
ENG ●CONNECTIONS
Center speaker
It is best to install it at the same height as the front speakers.
You can also install it directly over or under the TV.
Surround Speakers
Place these speakers behind your listening position.
If there isn't enough room, place these speakers so they face each other.
Place them about 2 to 3 feet (60 to 90cm) above your ears, facing slightly downward.
Unlike the front and center speakers, the surround speakers are used to handle mainly sound effects
and sound will not come from them all the time.
When you attach the speakers to the wall, make sure to fasten them tightly so they do not fall off.
Speaker Configuration
For the best surround-sound experience, you should connect five speakers and a powered subwoofer.
The following table shows which channels you should use based on the number of speakers you have.
2 speakers 3 speakers 4 speakers 5 speakers
If you place a speaker near your TV set, screen color may be distorted because of the magnetic field generated
by the speaker. If this occurs, place the speaker away from your TV set.
M
M
HW-C500-C560S-XAC_0309.indd 15HW-C500-C560S-XAC_0309.indd 15 2010-03-09  5:31:422010-03-09  5:31:42

16
Connections
CONNECTING THE SPEAKERS (HW-C500)
iPo
d
SW
FRONT (R)
(not supplied)
ACTIVE SUBWOOFER
(not supplied)
SURROUND (L)
(not supplied)
SURROUND (R)
(not supplied)
SUBWOOFER
(not supplied)
FRONT (L)
(not supplied)
CENTER
(not supplied)
The HW-C500 model does not supply speakers (sold separately). Contact a Samsung Electronics retailer for
purchasing.
Connecting Speaker Wire
Loosen the knob by turning counterclockwise.
Insert the bare part of the wire into the hole in the side of each
terminal.
Tighten the knob by turning clockwise to secure the wire.
Keep the subwoofer speaker out of reach of children to prevent them from inserting their hands or objects into
the duct (hole).
Never touch speaker terminals while the power is on. Doing so could result in electric shock.
Make sure the polarities (+ and -) are correct.
Connecting the Speakers
Press down the terminal tab on the back of the speaker.
Insert the black wire into the black terminal (–) and the red wire into the
red (+) terminal, and then release the tab.
Connect the connecting plugs to the back of the AV Receiver.
Make sure the colors of the speaker terminals on the back of the
AV receiver match the colors of the connecting plugs.
M
1.
2.
3.
M


1.
2.
3.
•
Model HW-C500
AV Receiver HW-C500
Black Red
HW-C500-C560S-XAC_0309.indd 16HW-C500-C560S-XAC_0309.indd 16 2010-03-10  5:21:352010-03-10  5:21:35

17
ENG ●CONNECTIONS
CONNECTING THE SPEAKERS (HW-C560S)
SW
iPo
d
FRONT (R)
PS-FC560S
ACTIVE SUBWOOFER
(not supplied)
SURROUND (L)
PS-RC560S
Model HW-C560S
AV Receiver HW-C560S
FRONT SPEAKER PS-FC560S
CENTER SPEAKER PS-CC560S
SURROUND SPEAKER PS-RC560S
SUBWOOFER PS-WC560S
SURROUND (R)
PS-RC560S
SUBWOOFER
PS-WC560S
FRONT (L)
PS-FC560S
CENTER
PS-CC560S
The Active Subwoofer is sold separately. Contact a Samsung Electronics retailer for purchasing.
Connecting the Speakers
Press down the terminal tab on the back of the speaker.
Insert the black wire into the black terminal (–) and the red wire into
the red (+) terminal, and then release the tab.
Press down the terminal tab on the back of the AV Receiver.
Insert the one wire into the terminal + and the other one into the
terminal -.
Make sure the colors of the speaker terminals on the back of the
AV receiver match the colors of the connecting plugs.
Keep the subwoofer speaker out of reach of children to prevent them
from inserting their hands or objects into the duct (hole).
Never touch speaker terminals while the power is on. Doing so could
result in electric shock.
Make sure the polarities (+ and -) are correct.
M
1.
2.
3.
4.
•
M


Black Red
1
2
Speaker
3
4
AV Receiver
HW-C500-C560S-XAC_0309.indd 17HW-C500-C560S-XAC_0309.indd 17 2010-03-09  5:31:462010-03-09  5:31:46

18
Connections
CONNECTING EXTERNAL DEVICES/YOUR TV VIA HDMI
HDMI is a digital standard interface for connection to such devices as a TV, projector, DVD player, Blu-ray player, set-top
box and more.
HDMI removes any loss of signal from analog conversion, enabling you to enjoy video and audio sound quality as it was
originally created in the digital source.
By connecting through the HDMI(High-Definition Multimedia Interface) interface, you can play back digital video and audio.
High-bandwidth Digital Content Protection System (HDCP) support
To play digital contents through the HDMI connection, both the connected external device and TV must
support High-bandwidth Digital Content Protection System (HDCP). This product supports HDCP.
Compatibility with a TV Supporting HDMI
A TV with an HDMI jack. Video/Audio
A TV with a DVI-D jack (TV supporting HDCP) Video
A TV with a DVI-D jack (TV not supporting HDCP) -
Audio from SACD discs will not be heard with this connection. To play a DVD disc whose copyright is protected
by CPPM, use a player supporting CPPM.
The quality of the audio output through the HDMI jack (sampling frequency and bit rate) may be limited by the
performance of the connected device.
Since HDMI connection supports both video and audio, you don’t have to connect an additional audio cable.
M


OPTICAL
OUT
O
NLY USE FOR
FIRMWARE
UPDATE
iP
o
d
• Connect it if you want
to use Anynet+.
DVD or
Blu-ray Player
SAT
(Cable/Satellite/Set-top box)
Game console
or
HDTV Tuner
(HDTV Terrestrial Receiver)
Camcorder
HW-C500-C560S-XAC_0309.indd 18HW-C500-C560S-XAC_0309.indd 18 2010-03-09  5:31:482010-03-09  5:31:48

19
ENG ●CONNECTIONS
HDMI FUNCTION
Using Anynet+(HDMI-CEC)
Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's
remote control. Anynet + can be used by connecting this AV Receiver to a SAMSUNG TV using an
HDMI Cable. This is only available with SAMSUNG TVs and SAMSUNG AV Products that support
Anynet+.
Connect the AV receiver to a Samsung TV with an HDMI cable. (See page 18)
Set the Anynet+ function on your TV.
(See the TV instructions manual for more information.)
You can operate the volume on the AV receiver by using the Volume buttons on the TV remote
control.
To turn on Anynet+
Press the SETUP/MENU button.
Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF.
Press the ENTER button to select SETUP ENTER.
Press the ▲▼ buttons to select HDMI SETUP, and then press the ENTER or ► button.
Press the ▲▼ buttons to select HDMI ANYNET+, and then press the ENTER or ► button.
Press the ▲▼ buttons to set ANYNET+ to ON.
- To exit setup mode-
Press the SETUP/MENU button.
SETUP OFF appears on the display and Setup Mode is exited.
If you use an HDMI cable to connect a Samsung TV to your AV Receiver, you can operate the AV receiver using
the TV’s remote control. This function is available only in connection with Samsung TV and DVD player
supporting Anynet +(HDMI-CEC).
Please check your TV for the nlogo. If your TV has an nlogo, then it supports the Anynet+
function.
When you are making Anynet+ connection, do not connect more than two AV receivers (Anynet+ installed).
Otherwise, it can cause a malfunction.
1.
2.
•
1.
•
2.
3.
4.
5.
•
M


HW-C500-C560S-XAC_0309.indd 19HW-C500-C560S-XAC_0309.indd 19 2010-03-09  5:31:512010-03-09  5:31:51

20
Connections
CONNECTING TO YOUR TV
Video Connection
If your television is equipped with Component Video inputs, connect a Component video cable(not
supplied) from the Component Video Output (PR, PBand Y) jacks on the back of your AV Receiver to the
Component Video Input jacks on your TV.
OR
Connect the Video cable from the VIDEO OUT (MONITOR) jack on the back of your AV Receiver to the
Video Input jack on your TV.
Audio Connection
Connect the Digital Input (OPTICAL 3) on your AV Receiver to the Digital Output of the TV.
OR
Connect AUDIO IN (TV) on your AV Receiver to the Audio Out of the TV.
OPTICAL
OUT
AUDIO
OUT
VIDEO
IN
COMPONENT
IN
iPod
or or
HW-C500-C560S-XAC_0309.indd 20HW-C500-C560S-XAC_0309.indd 20 2010-03-09  5:31:512010-03-09  5:31:51