Samsung SCV-2080 User manual

High Resolution Vandal
Dome Camera
User Manual
SCV-2080

B
v
d


Copyright
©2009 Samsung Techwin Co., Ltd. All rights reserved.
Trademark
is the registered logo of Samsung Techwin Co., Ltd. The name of this
product is the registered trademark of Samsung Techwin Co., Ltd.
Other trademarks mentioned in this manual are the registered trademark of their respective company.
Restriction
Samsung Techwin Co., Ltd shall reserve the copyright of this document. Under no circumstances,
this document shall be reproduced, distributed or changed, partially or wholly, without formal
authorization of Samsung Techwin.
Disclaimer
Samsung Techwin makes the best to verify the integrity and correctness of the contents in this
document, but no formal guarantee shall be provided. Use of this document and the subsequent
results shall be entirely on the user’s own responsibility.
Samsung Techwin reserves the right to change the contents of this document without prior
notice.
Warranty
Samsung Techwin Co., Ltd shall reserve the copyright of this document. Under no circumstances,
this document shall be reproduced, distributed or changed, partially or wholly, without formal
authorization of Samsung Techwin.
High Resolution Vandal Dome Camera
User Manual

Before operating the camera, confirm the camera model and correct input power
voltage. To help you understand this manual thoroughly, we'll introduce our model
description.
 SCV-2080 SERIES
• NTSC MODELS • PAL MODELS
SCV-2080N
SCV-2080P
 MODEL DESCRIPTION
• SCV-2080X
_
• SIGNAL SYSTEM
N ĄNTSC MODEL
P ĄPAL MODEL
SIGNAL SYSTEM

This installation should be made by a qualified service person and
should conform to all local codes.
The lightning flash with an arrowhead symbol, within an equilateral triangle
is intended to alert the user to the presence of uninsulated “dangerous
voltage” within the product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
INFORMATION - This equipment has been tested and found to comply with limits
for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his
own expense.
WARNING - Changes or modifications not expressly approved by the
manufacturer could void the user’s authority to operate the
equipment.
WARNING - To prevent electric shock and risk of fire hazards:
 Do NOT use power sources other than that specified.
 Do NOT expose this appliance to rain or moisture.
•
•
•
•
•



•



•











•
•
•

COLOR DOME CAMERA SCV-2080
5
d
n
gle
t
ude
h
e
)
mits
a
re
h
e
s
,
i
o
a
t his
Contents
Contents
• Features  ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 
•
Precautions ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 
•
Components and Accessories ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 
•
Overview  ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 
•
Installation  ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ

■Installation
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 

■Adjusting the monitoring direction of the camera
ÄÄÄÄÄÄÄÄÄÄÄÄÄ 

■Optional Accessories for Installation
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 
• Connection ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ

■ Connecting to Monitor
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 

■Connecting to Power
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 

■Using Coaxial Communications
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 
• Operating Your Camera ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 

■Menu Configuration
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 

■Menu Setup
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 
 Â
LENS ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 
 Â
EXPOSURE ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 
 Â
WHITE BAL (White Balance) ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 
 Â
SSDR (Samsung Super Dynamic Range) ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 
 Â
BACKLIGHT ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 
 Â
SSNR3ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 
 Â
DAY/NIGHTÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 
 Â
SPECIAL ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 
 Â
EXITÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 
• Troubleshooting ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 
•
Specifications  ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 
•Dimension ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 

COLOR DOME CAMERA SCV-2080
6
Contents
Features
Excellent Sensitivity
The built-in high sensitivity COLOR CCD produces
a clear image.
- Color : 0.15Lux(50IRE, @F1.2), 0.0003LUX
(SENS-UP, x512)
- B/W : 0.001Lux(50IRE, @F1.2), 0.000002LUX
(SENS-UP, x512)
DAY&NIGHT(ICR)
This camera has a function that automatically
selects the mode that is appropriate for daytime
or night-time conditions.
The COLOR mode operates in daytime
conditions to provide optimum colors, and B/W
mode operates in night-time conditions to
enhance the definition of the image.
DIS (Digital Image Stabilizer)
The DIS function compensates for any camera
movement, to produce more stable pictures.
Communication
Coaxial communication methods are supported.
- Protocol : Pelco Coaxitron
Miscellaneous Functions
HLC(High Light Compensation), SENS-UP, FLIP
(H/V-REV), D-ZOOM, SHARPNESS and PRIVACY
functions are provided.
OSD
The camera’s OSD is complimented by 18 languages.
- NTSC : Korean, English, French, Spanish,
Japanese, Portuguese, Taiwanese
- PAL : English, Chinese, German, Italian, French,
Spanish, Russian, Czech, Polish, Romanian,
Serbian, Swedish, Danish, Turkish, Portuguese
SSNR3 (Samsung Super Noise
Reduction) Function
The high-performance W-V DSP chip effectively
removes low-light gain noise and afterimage to
provide clear images even in dark environments.
High Resolution
By adopting a diagonal 6mm(1/3") 410,000
(NTSC) pixel, 470,000(PAL) pixel SONY CCD,
the camera produces clear picture quality with
a horizontal resolution of 600 TV lines in color
and a horizontal resolution of 700 TV lines in B/
W mode.
SSDR
(Samsung Super Dynamic Range)
For images with high contrast between bright
and dark areas from difficult lighting
conditions such as backlighting, this camera
selectively illuminates darker areas while
retaining the same light level for brighter
areas to even out the overall brightness.
Motion Detection
Since the camera detects motion without any
additional external sensor, you can monitor
activity more efficient.
T
o
IP66 Approved/Dust and Rain
Resistant
With dust and rain resistant design, the camera can be
installed outside under building eaves or places that are
exposed to the dust and rain.

COLOR DOME CAMERA SCV-2080
7
a
e
s.
s
e
Samsung Techwin cares for the environment at all product manufacturing
stages to preserve the environment, and is taking a number of steps to provide
customers with more environment-friendly products. The Eco mark represents
Samsung Techwin's will to create environment-friendly products, and
indicates that the product satisfies the EU RoHS Directive.
This information is provided to ensure your safety and to prevent any losses, financial or
otherwise. Please read it carefully and use the product accordingly.
* For product inquiries, please contact the retail shop where you bought the camera. The use of equipment such as
an aerial ladder while providing after-sales service shall be at your expense.
* Separate the power plug during a thunder storm.
* This product is support equipment for surveillance systems. Therefore, we can't compensate for material loss and/
or personal injuries by robbery, fire, natural disaster or other such events.
Ignoring this information may
result in material loss and/or
serious personal injuries including
death.
Indicates "Never Allowed."
Ignoring this information may
result in material loss and/or a
slight injuries.
Indicates "No Disassembling."
Warning/Attention/Special Mark Messages
Warnings & Cautions

COLOR DOME CAMERA SCV-2080
8
Do not install under extreme
temperature conditions.
Use only under temperature conditions between
-50°C and +50°C. Provide good ventilation when
using in high temperature conditions.
Do not install in high humidity
environment.
May lower image quality.
Do not install under unstable lighting
conditions.
Severe lighting changes or flickering may
hinder normal camera operation.
Avoid touching the camera lens.
The lens is the most important component
of the camera. Be careful not to smear it
with fingerprints.
Do not drop the camera or subject it
to physical shock.
May cause a product malfunction.
Never keep the camera face to
strong light directly.
May damage the CCD.
Precautions

COLOR DOME CAMERA SCV-2080
9
n
t
it
• Exposure to a spotlight or an object emitting strong light may cause smear or blooming.
• Ensure that the power source complies with normal specifications before supplying it to
the camera.
Notes
Do not expose the camera to
radioactivity.

COLOR DOME CAMERA SCV-2080
10
Components and Accessories
❶➋
➍
❼
➏➎
❾❽
❶ High Resolution Vandal Dome Camera SCV-2080
➋ Instruction Manual
➌ Quick Install Guide
➍ Template
➎
Cable for test monitor connection
➏ Plastic Anchor (4 EA)
➐
L-wrench
➑
Fixing Screws (4 EA)
➒
Tapping Screws (4 EA)
➌
1
SCV-2080 Series
Quick Install Guide
Thisinstallation should be made by a qualified service person and should conform to all
localcodes.
Thelightning flash with arrowhead symbol, within an equilateral triangle is intended
toalert the user to the presence of uninsulated "dangerous voltage" within the
product'senclosure that may be of sufficient magnitude to constitute a risk of
electricshock to persons.
Theexclamation point within an equilateral triangle is intended to alert the user to the
presenceof important operating and maintenance (servicing) instructions in the
literatureaccompanying the appliance.
INFORMATION-This equipment has been tested and found to comply with limits for a
ClassA digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment.This equipment generates,
uses, and can radiate radio frequencyenergy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will requiredto correct the interference at
hisown expense.
WARNING - Changes or modifications not expressly approved by the manufacturer
couldvoid the user’s authority to operate the equipment.
WARNING - To prevent electric shock and risk of fire hazards:
ýDoNOT use other than specified power source.
ýDoNOT expose this appliance to rain or moisture.
High Resolution Vandal Dome
Camera SCV-2080
User Manual SCV-2080

COLOR DOME CAMERA SCV-2080
11
❶Pan Base : Control panning angle of camera.
➋
Rotate Base : Control rotating angle of camera.
➌
x3.6 Vari-focal Lens Module 2.8 ~ 10.0mm (F1.2)
➍
Video Output Terminal to Monitor
➎
Function Setup switch : Display the menu on the screen and move the cursor to four
directions to confirm status or changing a selected item.
➏ Video Output Jack ➐
Power Input Terminal
❽
Dome Cover ❾ Inner cover
❿Wing locker ⓫ Lock releaser
Overview
•
❽
❾
➊
❿
➋➌
➎➍
⓫
➐
➏

COLOR DOME CAMERA SCV-2080
12
Installation
1) Using the L-wrench provided, loosen
3 screws by turning them
counterclockwise and separate the
dome cover.
2) Lift up the inner cover while gently
pressing both ends to separate it from
the unit.
Installation
3) Loosen 3 screws by turning them
counterclockwise, press both left
and right lock releases inwards (in
arrow direction) to unlock the
stopper, and then separate the
camera from the case.
Disassembling
1
2
3
4
5
Case
Main Body (Camera)
Inner cover
Dome Cover

COLOR DOME CAMERA SCV-2080
13
Installing the camera on a ceiling or wall
1) Affix the mounting template(supplied) to
the mounting surface.
2) Drill holes (diameter 5mm, more than 35mm
deep) on the ceiling by matching to the holes
on the case bed, and insert plastic anchors
(HUD 5) fully into the holes. Fix the case bed
on the ceiling by using Tapping Screws
(TH M4xL30). (4 places)
3) Connect power and video cables and
arrange cable running not to damage or
squeeze them, and assemble the camera
unit in the reverse way.
4)
Pass the power and BNC cable through the
hole you want to pass them when mounting
the main body on the mounting bracket.
5) Secure the camera on its mounting bracket
with the four screws.
Ø5 tapping screw x 4 (supplied)
M4 machine screw x 3

COLOR DOME CAMERA SCV-2080
14
Installation
Installing the camera on a ceiling or wall with pipeline
1) Secure the mounting bracket on the place
you want to mount it after combining the
mounting bracket with the pipeline.
2) Connect power input and video output cables
with the each cable from pipeline.
3) Secure the main body on mounting bracket.
M4 machine screw x 3
Ø5 tapping screw x 4 (supplied)
Hole for 3/4° pipe
(JIS B 0202-1966)
1
2
3

COLOR DOME CAMERA SCV-2080
15
3
e
d)
e
3FJOTUBMMUIFEPNFDPWFSUPUIFNBJOCPEZ
1) Adjust the lens in a desired direction.
2) Secure the inner cover to the main unit.
3) Assemble the Dome Cover.
For waterproof purpose, fix and secure the bolt using L-wrench provided.
Case
Main Body (Camera)
Inner cover
Dome Cover

COLOR DOME CAMERA SCV-2080
16
Installation
"EKVTUJOHUIFNPOJUPSJOHEJSFDUJPOPGUIFDBNFSB
1) You can adjust the camera direction only when the camera is fixed on the ceiling.
Then, turning the camera to the left or right is referred to as "Panning", while moving the
camera angle up or down is "Tilting". For panning, the panning limit is 220° for the
clockwise, and 135° for the counter-clockwise, a total of 355° enabled; further rotation is
prevented by the stopper.
• Adjust the panning angle so that the camera settles in the right horizontal position. You
can adjust the panning up to 135° in each one direction, and 220° in the other direction,
a total of 355°.
• Adjust the tilting angle so that the camera settles in the right vertical position. You can
adjust the tilting between 0° and 90°.
• The total rotation range is 355°. You can make adjustment in one direction up to 125°,
and 230° in the other direction.
2) Methods of adjustment
• The case of wall installation
➊After mounting the camera on the wall, adjust the panning angle so that the camera
faces a desired direction when tilting.
➋Adjust the Rotate position to fit the video to the screen borders.
➌Then, adjust the tilting angle so that the camera faces the monitoring direction.
1
)
2
)
F
Panning
Tilting
Lens rotation
60˚ ~ 80˚
0˚

COLOR DOME CAMERA SCV-2080
17
0QUJPOBM"DDFTTPSJFTGPS*OTUBMMBUJPO
• The case of ceiling installation
➊After mounting the camera on the ceiling, adjust the panning angle according to the
monitoring direction. You should adjust the panning angle lest that the video be
displayed upside down on the monitor.
➋Adjust the Rotate position to fit the video to the screen borders.
➌Then, adjust the tilting angle so that the camera faces the monitoring direction.
1) WALL MOUNT ADAPTOR(SCX-300WM)/
HANGING MOUNT(SCX-300HM) This adaptor
is used when installing the dome camera
onto a wall.
2) CEILING MOUNT ADAPTOR(SCX-300CM)/
HANGING MOUNT(SCX-300HM) This adaptor
is used when installing the dome camera on
a concrete ceiling.
For your easier installation, you can purchase appropriate optional accessories.
• For smoother Rotate adjustment, set the Tilt position between 60˚ ~ 80˚.
Notes

COLOR DOME CAMERA SCV-2080
18
$POOFDUJOHUP.POJUPS
Connect the Video Output jack to the VIDEO-IN jack of monitor.
CCTV Camera Monitor
• As the connecting method varies with the instruments, refer to the manual supplied with the instrument.
• If necessary, you can connect the monitor to the REMOTE jack on the back of your camera.
• Only connect the cable when the power is turned off.
C
O
D
•
*
W
Installation
Connection
4) CORNER MOUNT ADAPTOR (SCX-300KM)
This is an adaptor for WALL MOUNT
ADAPTOR (SCX-300WM) installation on
the corner of wall joint.
3) POLE MOUNT ADAPTOR(SCX-300PM) This
is an adaptor for WALL MOUNT ADAPTOR
(SCX-300WM) installation on a pole whose
diameter is bigger than 80mm.

COLOR DOME CAMERA SCV-2080
19
Connect the adaptor to the power input terminal as shown in the figure below.
Output of the adaptor should be either one of AC 24 V, 1.5 A or DC 12 V, 1.0 A. Note that using
DC 12 V may cause lower heater temperature.
Connecting to Power
---- Power Input Terminal
• As shown in the table above, voltage decreases as the wire gets longer. Therefore use of
an excessively long adaptor output line for connection to the camera may affect the
performance of the camera.
* There may be some deviation in voltage drop depending on the type of wire and the manufacturer.
When the resistance value of copper wire is at [20˚C(68˚F)]
Copper wire size (AWG) #24(0.22mm2) #22(0.33mm2) #20(0.52mm2) #18(0.83mm2)
Resistance (Ω/m)
0.078 0.050 0.030 0.018
Voltage Drop (V/m)
0.028 0.018 0.011 0.006
Connection
• Be sure to connect power only after all the installation is complete.
• Note that AC / DC adaptor is not supplied with camera.
• Ground should be connected to the GND terminal.
Notes

COLOR DOME CAMERA SCV-2080
20
• Coaxial Communications System
• OSD Control method
Using Coaxial Communications
Distance Recommended Cable Specification
300m 3C2V(RG-59/U)
450m 5C2V(RG-6/U)
600m 7C2V(RG-11/U)
• Video Cable
The camera's video output port is connected to the monitor with a BNC coaxial
cable, shown below : If the distance between the camera and the monitor exceeds
the recommended maximum, please use an auxiliary video amp.
• It is recommended that pure copper coax cable is used and not copper coated
steel, as this will cause issues with the communication over the coaxial cable.
Notes
CAMERA DVR CONTROLLER
SET MENU/ENTER OSD KEY
UP UP KEY JOYSTICK UP
DOWN DOWN KEY JOYSTICK DOWN
LEFT LEFT KEY JOYSTICK LEFT
RIGHT RIGHT KEY JOYSTICK RIGHT
DVR
• : BNC
• ---- : RS-485
DVD
Connection