Samsung Galaxy Tab E 8 User manual

Table of Contents
2 Know your device
4 Device setup
8 Customize
10 Connections
11 Apps
12 Contacts
13 Messages
14 Camera
15 Internet

2
Know your device
Front view
Recent Back
Home
Power/Lock
microSD Card
Slot
SIM Card Slot
Volume
Front Camera

3
Back view
USB/Charging
Port
Headset Jack
Camera
Speaker

4
Device setup
Install the SIM card
Ifyou need to replace your SIM card, follow these steps:
1. Locate the SIM card slot on the side of the tablet
and open the SIM card slot cover.
2. Position the SIM card with the carrier logo facing up.
3. Carefully slide the SIM card into the SIM card slot
(as shown) until it clicks into place.
4. Close the SIM card slot cover.

5
Optional: Insert memory card
1. Locate the microSD™card slot on the side of the
tablet and open the microSD card slot cover.
2. Position the microSD card with the gold strips
facing down.
3. Carefully slide the microSD card into the microSD
slot (as shown) until it clicks into place.
4. Close the microSD card slot cover.
microSD card sold separately.

6
Charge the device
Before turning on your device, charge it fully.
Your device comes with a charger and a USB cable.
Plug the smaller end of the cable into the USB charger
port on the top of your device and the other end into the
charger; then plug the charger into an electrical outlet.
Caution: Use only charging devices that are approved
by Samsung. Samsung accessories are designed
for your device to maximize battery life. Using
other accessories may void your warranty and
maycausedamage.

7
Turn the device on and off
• To turn On, press and hold the Power/Lock button.
• To turn Off, press and hold Power/Lock button and
follow the prompts.
Lock and unlock the device
Use your device’s screen lock features to secure your
device.
• To Lock, press the Power/Lock button.
• To Unlock, press the Power/Lock button, and then
swipe your nger across the screen.
Configure your device
When you rst turn on your device, you need to set up a
few things.
1. Select a language and tap START or tap
ACCESSIBILITY.
2. Follow the prompts to complete the setup process.

8
Customize
Wallpaper and widgets
Touch and hold a blank space on
a home screen to access options.
• Wallpapers: Change the
look of the Home and Lock
screens with a variety of
wallpapers.
• Widgets: Drag a widget to an
empty space on the Home
screen for quick access to
applications.
• Home screen settings:
Customize the look of
the Home screen.

9
Volume and notification sounds
◆ From the Home screen, swipe up for Apps and then
tap Settings gSounds and vibration.
• Tap Volume to increase or decrease device
volume settings.
• Tap Notification sounds to select sounds for
notifications.

10
Connections
Connect to Bluetooth
1. From the Home screen, swipe up for Apps and then
tap Settings gConnections gBluetooth.
2. Tap On/Off to turn on Bluetooth®.
3. Tap a device from the list to initiate pairing.
4. Enter the passkey/PIN code, if required, and tap OK.
When connected displays in the status bar.
Connect to Wi-Fi
1. From the Home screen, swipe up for Apps and then
tap Settings gConnections gWi-Fi.
2. Tap On/Off to turn on Wi-Fi®.
3. Tap a network and enter the password if prompted.
When connected displays in the status bar.