Samsung 5 Series User manual

Quick Setup Guide
Congratulations on the purchase of your new Samsung TV.
Read this setup guide to get your TV up and running quickly.
1-800-SAMSUNG (1-800-726-7864)
Samsung Electronics America, Inc.
85 Challenger Road Ridgefield Park, NJ 07660-2112
Samsung Electronics Canada Inc.
55 Standish Court Mississauga, Ontario L5R 4B2
Call Center hours of operation: Mon-Sun, 9:00 AM -12
AM EST.
To register this product, visit: www.samsung.com/
register.
STOP
Please do not return this unit.
If you have problems operating your
TV, call:
1-800-SAMSUNG (1-800-726-7864)
For web support please visit:
www.samsung.com/support
Step 3: Connect External Devices
Connecting an AV device (DVD/Blu-ray player, cable/satellite box, etc.)
Use one of the connections below to connect your TV to an external A/V device. We recommend using HDMI for the highest picture quality.
Connecting an audio device (Home Theater, etc.)
Connect your TV to your Home Theater or other audio device to enjoy enhanced
Sound quality.
Connecting a PC
Connect your TV to a PC to use it as a Monitor.
✎ When connecting to AV IN 1 on the back of your TV, attach the
video cable (yellow) to the green jack next to the AV IN 1 label.
The jack will not match the color of the video cable (yellow).
Step 4: Run Plug & Play
When you turn on your TV for the first time, it automatically launches the Plug &
Play function. With Plug & Play, you can select the On Screen Display language,
set the clock mode, and launch the TV’s channel memorizing process.
It also displays connection instructions similar to those in this guide.
To navigate while Plug & Play is running, press the Up, Down, Left or Right arrow
buttons on your remote. To make a selection, press the ENTER
E button.
To skip a screen, press the MENU button. To turn on your TV, press the POWER
button on the remote or on the TV. To run Plug & Play, follow these steps:
1 Using your remote control,
select the language for the On
Screen Display (OSD), and then
press the ENTER E button.
2 Select Home Use, and then
press the ENTER E button. If you select Store Demo, the TV will reset your
picture and audio settings every 30 minutes.
3 Select Antenna Source and Channel Source. If Antenna Source is
Cable or Auto, you must select Channel Source to same type as your
cable system type. After selecting source, select Search; then press the
ENTER E button on your remote.
✎ Most cable systems are Standard(STD) systems, If you are not sure
about what kind of cable system you have, contact your cable company.
✎ If your TV is attached to a cable or satellite box, skip Steps 3 through 5.
After Plug & Play is complete, set your TV to Channel 3 or 4, according
to the directions for your cable or satellite box.
4 The TV memorizes the available channels. This process can take up to 45
minutes.
5 After the TV has memorized the channels, choose the Clock Mode. Select
Auto if you have a digital channel in your area. Select Manual if you don’t, or
if you have a cable or satellite box. When done, press the ENTER E button.
✎ If you select Manual, the clock setting screen appears.
6 Select the daylight savings time setting: Off or On, and then press the
ENTER E button
7 Select the time zone in which you live, and then press ENTER E button.
8 After the time zone screen, The connection method for best HD screen
quality is displayed. Press Right arrow button on your remote to view each
screen in succession. Press the Blue button to skip this section.
9 The Enjoy your TV. screen appears. Then press the ENTER E button.
Changing the Screen Size
Your TV has several screen size options, each designed to work best with specific
types of video input. If you have a cable box or satellite receiver, it may have its own
set of screen sizes as well.
To change the screen size, press the P.SIZE button on your remote. The first time
you press it, your TV displays the current setting. Thereafter, each time you press
the P.SIZE button, you change the size of the picture on the screen.
The following sizes are available:
16:9 Wide screen 4:3 Standard screen Wide Fit
Zoom 1 Zoom 2 Screen Fit
✎ Screen Fit Displays the full image without any cut-off when HDMI (720p /
1080i / 1080p) or Component (1080i / 1080p) signals are inputted.
Changing the Picture Mode
Your TV has three preset Picture Modes with factory adjusted settings, each
designed to give you an excellent picture under specific conditions.
To change the Picture mode, press the P.MODE button on your remote. The first
time you press it, your TV displays the current setting. Thereafter, each time you
press the P.MODE button, you change the mode of the picture on the screen.
The Picture Modes are listed and described in the table below:
Mode Description
Dynamic Brightens picture. For a vibrant, enhanced image in brightly lit or
sunny room.
Standard For a bright, detailed picture in a normally lit room.
Movie For a studio quality cinema picture in a dimly lit or dark room.
To change the Picture Mode, follow these steps:
1. With the TV on, Press the MENU button on your remote, then select Picture.
2. Select Mode, then Press the ENTER
E button.
3. On the Mode menu in Picture, use the ▼ or ▲ on your remote to select the
picture mode you want.
4. Press the ENTER
E button to finish the change.
Setting the Clock
Before you can use your TV’s On/Off Timer, you must set the clock. To set the
clock, follow these steps:
1. Turn on your TV, press the MENU button on your remote, then select Setup →
Time.
2. Select Clock Mode, and then press the ENTER
E button.
3. Choose Auto or Manual.
x
If you select Auto, the current time will be set automatically using the time
from a digital channel.
x
If you select Manual, you can set the Month, Day, Year, Hour, Minute
and am/pm directly by pressing up, down, left and right arrow button on
your remote.
4. Press the RETURN button on your remote when done.
Component Cable
(Not Supplied)
HDMI OUT
AUDIO OUT DVI OUT
AUDIO OUT
VIDEO OUT
AUDIO OUT
COMPONENT OUT
Best Connection
HD connection (up to 1080p)
Using an HDMI Cable
Device
Using an HDMI to DVI Cable
HD connection (up to 1080p)
Very Good Connection
Device
Using a Component Cable
Good Connection
Component connection (up to 1080p)
Device
Lowest Quality Connection
Using a an Audio/Video Cable
Audio/Video connection (480i only)
Device
Audio Cable
(Not Supplied)
HDMI to DVI Cable
(Not Supplied)
Audio Cable
(Not Supplied)
Audio Cable
(Not Supplied)
HDMI Cable (Not Supplied)
Video Cable (Not Supplied)
AUDIO IN
OPTICAL
Analog Audio connection
Digital Audio connection
Amplifier / DVD
home theater
Using an Audio Cable
Using an Optical Cable
Digital Audio System
Audio Cable
(Not Supplied)
Optical Cable (Not Supplied)
DVI OUT
AUDIO OUT
AUDIO OUT
PC OUT
HD connection
Using a DVI to HDMI Cable
Using an D-Sub Cable
Audio Cable (Not Supplied)
HDMI to DVI Cable (Not Supplied)
D-Sub Cable
(Not Supplied)
Audio Cable (Not Supplied)
DVD / Blu-ray player / HD Cable
Box / HD STB (Set-Top-Box)
satellite receiver
DVD, Blu-ray player, cable box, STB satellite receiver, VCR
DVD, Blu-ray player, cable box,
STB satellite receiver, VCR
Step 1: Install the Batteries into the Remote
To install batteries into your remote
control, follow these steps:
1. Lift the cover on the back of the
remote upward as shown in the figure
to the right.
2. Install two AAA batteries.
✎ Make sure to match the + and -
ends of the batteries to the diagram in the battery compartment.
3. Replace the cover.
Step 2: Connect Power and Antenna or Cable
VHF/UHF Antenna
Connect Ant In to
• Wall cable jack
• VHF/UHF Antenna
• Cable or Satellite box
Ant or Cable Out
Make sure the AC power cord is plugged in securely to
the wall outlet and the TV.
Use a 75 ohm (round) cable.
or
U Move E Enter
Select Language of the OSD.
Menu Language :
Plug & Play
English
Español
Français
[PC500-QSG]BN68-03218A-00Eng.indd 1 2010-09-07 오전 10:55:13
All manuals and user guides at all-guides.com
all-guides.com

The LAN Port on the Wall
LAN Cable (Not Supplied)
Wireless IP
sharer
Samsung Wireless LAN
Adapter
or TV Rear Panel
TV Side Panel
Step 6: Media Play Features
The Media Play feature lets you connect to your PC through your home network and
stream PC audio and video files to your HDTV using your remote. To use IPTV or
Samsung PC Share Manager, you must connect your TV to your network. You can
attach the TV to your network in two ways, by cable, using CAT 5 cable, or wirelessly,
using a Samsung Wireless LAN Adapter. Instructions for both connection methods are
below.
Network Connection - Wired
There are two main ways to connect your TV to your network using cable,
depending on your network setup. They are illustrated below:
Configuring the Network Connection - Wired
Most home networks use the Dynamic Host Configuration Protocol (DHCP) to
configure network connections. Home networks that support DHCP automatically
provide the IP address, subnet mask, gateway, and DNS values your TV needs to
access the Internet so you don’t have to enter them manually.
To configure your network connection for a network that uses DHCP, follow these
steps:
1. Connect your TV to your network as shown in one of the illustrations above.
2. Turn on your TV, press the MENU button on your remote, and then select
Setup → Network.
3. Set the Network Type to Wired if it is not already set to Wired.
4. Select Network Setup. The Network Setup screen appears.
5. On the Network Setup menu,
set Internet Protocol Setup
and DNS Setup to Auto.
Auto acquires and enters
the necessary internet values
automatically.
6. Select Network Test to check
Internet connectivity.
✎ Some networks are Static
IP networks. If your network
is a Static IP network, you can not use DHCP to configure the network
connection. Instead, you must enter the IP Address, Subnet Mask,
Gateway, and DNS Server manually. For instructions explaining how to
configure a Static IP network, see your user’s manual.
Network Connection - Wireless
You can connect your TV to your LAN through a standard wireless router or
modem. To connect wirelessly, you must first attach a “Samsung Wireless LAN
Adapter” (WIS09ABGN, WIS09ABGN2, WIS10ABGN - sold separately) to either the
USB 1 or USB 2 (HDD) port on the back of your TV. See the illustration below.
Samsung’s Wireless LAN adapter is sold separately and is offered by select
retailers, Ecommerce sites and Samsungparts.com. Samsung’s Wireless LAN
adapter supports the IEEE 802.11A/B/G and N communication protocols.
Samsung recommends using IEEE 802.11N. When you play the video over a IEEE
802.11B/G connection, the video may not play smoothly.
Most wireless network systems incorporate a security system that requires devices
that access the network through an access point or AP (typically a wireless IP
Sharer) to transmit an encrypted security code called an access key.
If Pure High-throughput (Greenfield) 802.11n mode is selected and the Encryption
type is set to WEP, TKIP or TKIPAES (WPS2Mixed) for your AP, Samsung TVs will
not support a connection in compliance with new Wi-Fi certification specifications.
Configuring the Network Connection - Wireless
The instructions below are for networks that use the Dynamic Host Configuration
Protocol (DHCP) to configure network connections automatically. If your have a
Static IP network, see your user’s manual for configuration instructions.
To configure your network connection for a network that uses DHCP, follow these
steps:
1. Connect your TV to your network as shown in the illustrations above.
2. Turn on your TV, press the MENU button on your remote, and the select Setup
→ Network.
3. Set the Network Type to Wireless if it is not already set to Wireless.
4. Select Network Setup. The Network Setup screen appears.
5. On the Network Setup menu,
select an AP(Access Point) and
ad hoc network. if you have
selected network with a security
key, the Security Key screen
appears.
6. Enter the security key using the
numbers on the remote, and then
press the Blue button on your
remote.
✎ If your network uses WEP
security encryption, 0~9 and A~F will be available on the Security
Key screen. Use the Direction button on your remote to move to the
characters and the enter key to select them.
7. On the Network Setup menu, set Internet Protocol Setup and DNS to Auto.
The Auto acquires and enters the necessary internet values automatically.
8. Select Network Test to check internet connectivity.
✎ For more information, see your user’s manual.
U Move E Enter R Return
Internet Protocol Setup : Auto r
IP Address :
Subnet Mask :
Gateway :
DNS : Auto
DNS Server :
Network Setup
PBC(WPS) U Move E Enter R Return
Select a Network : Not Selected r
Internet Protocol Setup : Auto
IP Address :
Subnet Mask :
Gateway :
DNS : Auto
DNS Server :
Network Setup
SUM
Change Device View Devices
E Enter R Return
MediaPlay
Videos
Step 5: Remote Control
Remote Control Buttons and Functions
✎ This is a special remote control for the visually impaired and has Braille points on the Power, Channel and Volume buttons.
Viewing the On Screen Menus
To view the On Screen Menus, follow these steps:
1. Turn on your TV, press the MENU button on your
remote. The main menu appears.
The menu’s left side has the following menu
options: Picture, Sound, Channel, Setup, Input, Application, and Support.
2. Press the ▲ or ▼ button on your remote to select a menu option, and then
press the ENTER
E button.
3. When done using the menu, press the EXIT button on your remote to exit.
Selecting a Source
To watch a movie on your Blu-ray player or watch
your favorite TV show, you must select the correct
source. A source is a device, such as a Blu-ray/DVD
player, a cable/satellite box, antenna or a cable TV
input. Sources can be connected to your TV through
the HDMI, DVI, Component, Composite, or D-sub
connections, or through the Antenna or Cable In connections.
To view the signal from a source connected to the HDMI, DVI, Component,
Composite, or D-sub jack, press the SOURCE button on your remote. Each time
you press the SOURCE button, you change to a different source.
Connecting a USB Device for Media Play
You can enjoy photo,
music, and movie files
stored on a USB device
by connecting it to the TV
and using the Media Play
feature. To connect a USB
device for Media Play,
follow these steps:
1. Turn on your TV.
2. Connect a USB device
containing photo, music and/or movie files to the USB 1 or USB 2 (HDD) port
on the back or side panel of the TV.
3. When USB is connected to the TV, popup window appears. Then you can
select Media Play.
Changing Channels and Adjusting the Volume
Adjust the volume by pressing the Volume button
on the remote.
CH LIST
MUTE
POWER
PRE-CH
HDMI
MENU
TOOLS
RETURN
MEDIA.P
FAV.CH
S.MODE
P.MODE P.SIZE
CC
SLEEP
A B C D
MTS
EXIT
INFO
SOURCE
Change the channels by pressing the Channel button on the remote.
✎ If your TV is attached to a cable or satellite box, change the channel using
the box’s remote.
✎ You can also change the channels by pressing the z button on the front panel of your TV and adjust the volume by pressing the y button.
BN68-03218A-00
CH LIST
MUTE
POWER
PRE-CH
MENU
TOOLS
RETURN
MEDIA.P
FAV.CH
S.MODE
P.MODE P.SIZE
CC
SLEEP
A B C D
MTS
EXIT
INFO
SOURCE
HDMI
Turns the TV on and off.
Returns to the previous channel.
Cuts off the sound temporarily.
Changes channels.
Displays Favorite Channel Lists on the screen.
Displays channel list on thescreen.
Displays information on the TV screen.
Selects the on-screen menu items and changes the values
seen on the menu.
Exits the menu.
S.MODE: Press to select the sound mode.
SLEEP: Use to set the sleep timer function.
MTS: Press to choose stereo, mono or Separate Audio
Program (SAP broadcast).
P.MODE: Press to select the picture mode.
P.SIZE: Selects the picture size.
CC: Controls the caption decoder.
Selects the HDMI mode directly.
Have direct access to channels.
Press to select additional channels (digital) being
broadcasted by the same station. For example, to select
channel “54-3”, press “54”, then press “-” and “3”.
Adjusts the volume.
Opens the OSD.
Views Media Play (USB).
Quickly select frequently used functions.
Returns to the previous menu.
These buttons are for the Channel list, Media Play
(USB) menu, etc.
Displays and selects the available video sources.
Use these buttons in Media Play (USB) and Anynet+
(HDMI-CEC) modes. ( � : Controls recording on
Samsung recorders that have the Anynet+ feature)
CH LIST
MUTE
POWER
PRE-CH
HDMI
MENU
TOOLS
RETURN
MEDIA.P
FAV.CH
S.MODE
P.MODE P.SIZE
CC
SLEEP
A B C D
MTS
EXIT
INFO
SOURCE
CH LIST
MUTE
POWER
PRE-CH
HDMI
MENU
TOOLS
RETURN
MEDIA.P
FAV.CH
S.MODE
P.MODE P.SIZE
CC
SLEEP
A B C D
MTS
EXIT
INFO
SOURCE
The LAN Port on the Wall
LAN Cable (Not Supplied)
Modem Cable (Not Supplied) LAN Cable (Not Supplied)
The Modem Port on the Wall TV Rear Panel
TV Rear Panel
External Modem
(ADSL / VDSL / Cable TV)
[PC500-QSG]BN68-03218A-00Eng.indd 2 2010-09-07 오전 10:55:16
All manuals and user guides at all-guides.com