Samsung QET Series User manual

User Manual
© Samsung
Samsung owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung is prohibited. Trademarks other than Samsung are property of their respective owners.
Series: QET
(Singapore only : QE43T / QE50T / QE55T / QE65T / QE75T / QE82T)
The colour and the appearance may differ depending on the product, and the content in the
manual is subject to change without prior notice to improve the performance.
Recommended hours of use per day for the QET models is less than 16 hours.
If the product is used for longer than 16 hours a day, the warranty may be void.
An administration fee may be charged in the following situations:
(a) An engineer is called out at your request, but it is found that the product has no defect (i.e.,
where the user manual has not been read).
(b) You bring the unit to a repair centre, but it is found that the product has no defect (i.e.,
where the user manual has not been read).
You will be informed of the administration fee amount before a technician visits.

Table of contents
Before Using the Product
Safety Precautions 4
Safety symbols 4
Electricity and Safety 5
Installation 6
Operation 8
Precautions when handling the panel 10
Cleaning 11
Storage and Maintenance 12
Preparations
Checking the Components 13
QE**T 13
Parts 14
QE**T 14
Anti-theft Lock 15
Ports 16
QE**T 16
Control menu 17
Remote Control 18
Before Installing the Product (Installation
Guide) 20
Tilting Angle 20
Ventilation 20
2
Installing the Wall Mount 21
Installing the Wall Mount 21
Wall Mount Kit Specifications (VESA) 21
Connecting and Using
a Source Device
Before Connecting 22
Pre-connection Checkpoints 22
Connecting to a PC 22
Connection Using an HDMI Cable 22
Connection Using an DP Cable 23
Connection Using a DVI Cable (Digital type) 23
Connection Using an HDMI-DVI Cable 24
Connecting an External Monitor 25
Connecting to a Video Device 26
Connection Using an HDMI Cable 26
Connection Using an HDMI-DVI Cable 26
Connecting to an Audio System 27
Connecting the LAN Cable 27
Changing the Input source 28
Source 28
Web Browser 29
Samsung Workspace or Remote Workspace 30
Multiple Display Control
Cable Connection 31
RS232C Cable 31
LAN Cable 32
Connection 34
Control Codes 35
Using MDC 42
MDC Programme Installation/Uninstallation 42
Player feature
Player 43
Viewing content 43
When content is running 44
Available menu 44
File Formats Compatible with Player 45
Schedule 49
Clone Product 50
ID Settings 51
Device ID 51
Device ID Auto Set 51
PC Connection Cable 51
Video Wall 52
Video Wall 52
Horizontal x Vertical 52
Screen Position 53
Format 53

Table of contents
3
Network Status 54
On/Off Timer 55
On Timer 55
Off Timer 56
Holiday Management 56
Ticker 57
URL Launcher 58
URL Launcher Settings 59
Menu
Picture 60
OnScreen Display 65
Sound 67
Network 69
Network Settings (Wired) 70
Network Settings (Wireless) 72
Use WPS 74
System 76
Support 88
Troubleshooting Guide
Requirements Before Contacting Samsung
Customer Service Centre 89
Testing the Product 89
Checking the Resolution and Frequency 89
Check the followings. 90
Specifications
General 96
Preset Timing Modes 98
Appendix
Responsibility for the Pay Service (Cost to
Customers) 99
Not a product defect 99
A Product damage caused by customer's
fault 99
Others 99
Prevention of Afterimage Burn-in 100
What is afterimage burn-in? 100
Recommended prevention practices 100
Licence 101

4
Before Using the Product
Chapter 01
The following safety instructions are to ensure your personal safety and prevent property
damage. Please read the following to ensure the proper use of the product.
Safety symbols
Symbol Name Meaning
Warning A serious or fatal injury may result if instructions are not followed.
Caution
Personal injury or damage to properties may result if instructions
are not followed.
Prohibition Do NOT attempt.
Instruction Follow directions.
CAUTION
RISK OF ELECTRIC SHOCK. DO NOT OPEN.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE
ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL.
This symbol indicates that high
voltage is present inside. It is
dangerous to make any kind of
contact with any internal part of this
product.
AC voltage: Rated voltage marked
with this symbol is AC voltage.
This symbol indicates that this
product has included important
literature concerning operation and
maintenance.
DC voltage: Rated voltage marked
with this symbol is DC voltage.
Class II product: This symbol indicates
that a safety connection to electrical
earth (ground) is not required. If this
symbol is not present on a product
with a mains lead, the product
MUST have a reliable connection to
protective earth (ground).
Caution. Consult instructions for use:
This symbol instructs the user to
consult the user manual for further
safety related information.
Safety Precautions

5
Electricity and Safety
"The following images are for reference only. Real-life situations may differ from what is
shown in the images.
Warning
Do not touch the power plug with wet hands.
Otherwise, an electric shock may result.
Do not bend or pull the power cable with force. Be careful not to
leave the power cable under a heavy object.
Product failure, an electric shock or fire may result from a damaged
cable.
Do not connect multiple products to a single power socket.
Overheated power sockets may cause a fire.
Insert the power plug all the way in so it is not loose.
An unsecure connection may cause a fire.
Clean any dust around the pins of the power plug or the power socket with a dry cloth.
A fire may result.
Connect the power plug to a grounded power socket. (Except for devices that do not
provide grounding)
An electric shock or injury may result.
Do not use a damaged power plug or a loose power socket.
An electric shock or fire may result.