Samsung VC-RA52V User manual

Precautions for safety are the contents to
secure the safety of user and to prevent
damage of property etc. Please read carefully
to have proper use of the product.
※ This product has been made to be used in
Korea, and the quality will not be guaranteed in
overseas countries.
(FOR KOREA UNIT STANDARD ONLY)
Robotic vacuum cleaner
Operation manual of the product
VC-RA52V
VC-RA50V* SERIES
VC-RL52V* SERIES
VC-RL50V* SERIES

As the cleaning is conducted by following the lattice
pattern ( ) with the ceiling image recognition method,
cleaning can be performed for every part of the room.
Realizing fine and uniform cleaning for every part of the room
Manual cleaning mode
Perform the cleaning
by directly moving the
cleaner with remote
controller.
Reserved cleaning mode
Reserve the cleaning
at desired time when
going out
Partial cleaning mode
Perform the cleaning of
partial area or when
being scattered of small
fragments of cookies etc.
Automatic
cleaning mode
Perform uniform and
convenient cleaning for
every room.
Repeated
cleaning mode
Perform repeated
cleaning until battery is
exhausted.
Various cleaning modes are provided in accordance
with the cleaning circumstances.
Diverse cleaning mode
2
Features and advantages of product
When remaining amount of battery is not sufficient, the
charger induces the robotic vacuum cleaner, therefore,
accurate automatic charging can be accomplished.
Automatic charging
What is the ceiling image
recognition (Visionary
Mapping TM) method?
As the product moves with its
own judgment on the place
to clean after recognizing the
image of ceiling with the
camera located at the upper
section, every part of the
room can be cleaned.

Features and advantages of product
3
Approx. 1 cm of threshold can be traveled with special
driving system, therefore, all the rooms can evenly be
cleaned. However, for the sake of safety, the threshold of
more than 1 cm can not be crossed.
Threshold traveling
If lifting the robotic vacuum cleaner while it is in operation,
the motions of driving wheel, power brush, suction motor,
and side rotating brush will be stopped due to the
detection of the sensor.
Safety device
The robotic vacuum cleaner can easily be operated with
the remote controller.
Remote controller
Dust is removed by the rotation of dual side brushes.
Dual side rotating brush
Dust of every corner can be neatly cleaned by approaching to the
corner as much as possible through the minimizing of colliding
impact as the velocity is reduced by 7 obstacle sensors when
encountering with obstacle and through the relieving of the
colliding impact by 2 bumper sensors during the cleaning. (The
obstacle sensor displays higher sensitivity against bright obstacle.)
Soft bumping

Preparation
Installation
Operation
Features and advantages of product .........................
Precautions for safety ........................................................
Items related with the power supply .................................
Before the use ........................................................................
During the use ........................................................................
Handling after the use ..........................................................
Components ...........................................................................
Name of each section .......................................................
Main frame ...............................................................................
Charger .....................................................................................
Remote controller ...................................................................
State indicating screen ..........................................................
Emergency switch ON/OFF ................................................
Installation of the charger .....................................................
Electric charging .....................................................................
Important items for battery ....................................................
Installation of entry prevention tape ....................................
Cleaning start/stop .................................................................
Returning to electric charging ...........................................
Automatic cleaning .................................................................
Partial cleaning ........................................................................
Repeated cleaning .................................................................
Manual cleaning .....................................................................
Reserved cleaning .................................................................
Additional functions ................................................................
Precautions before the handling ........................................
Handling of sensor window and camera ........................
Handling of dust bin and HEPA-filter .................................
Handling of power brush .....................................................
Handling of side rotating brush ..........................................
Handling of driving wheel ....................................................
Confirming items before reporting the failure ..........
Corrective measures for each inspection code .............
Specification of product ....................................................
Disposal guidance of waster electronic product ............
2
5
5
6
9
10
11
12
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
29
30
31
32
33
34
36
37
39
Contents
4
Handling
Others

Precautions for safety
preparation
5
These are the contents to secure the safety of user and to prevent damage of property.
Please have safe operation by reading carefully of the following items.
Always observe followings for
safety
If caution items are not being observed, wound or
property damage can be occurred to the user.
This product is used 220V as the rated voltage.
If warning items are not being observed, death or serious
wound can be occurred to the user.
Corresponding terminology will be
explained to improve the understanding for
the product operation.
This is the disassembly prohibited
indication. Refer to the corresponding page.
Contents with which more efficient
use of the product can be realized
will be explained.
Do not impair the power
supply cord by excessively
bending it or pressing it
down with heavy object.
▶ There is the danger of
electric shock or fire.
Items related with the power supply
Do not use the power
source other than 220V or
do not connect several
electric products
simultaneously to one
outlet. (Do not expose the
cord line on the floor.)
▶ There is the danger of electric shock or fire.
If dust, water etc. are
adhered to the pin and
contact section of the power
supply plug, thoroughly
clean them.
▶ There is the danger of
abnormal operation and
electric shock.
Do not use damaged
power supply plug,
power supply cord, or
loosened outlet.
▶ There is the danger of
electric shock or fire.
Do not pull the power
supply cord section or
touch the power supply
plug with wet hand.
▶ There is the danger of
electric shock or fire.